Bell'O WAVs99144 User manual

WAVs99144
WOOD AUDIO/VIDEO CABINET
Assembly I structIo s

Bell’O International Corp. will not be responsible for failure to assemble as directed or for the improper assembly, use or handling of this stand.
FOR YOUR SAFE Y, PLEASE FOLLOW HESE PRECAU IONS:
! Do ot plAce Items o the shelVes WhIch exceeD the mAxImum WeIGht lImIts of 125 lbs. for
top shelf, A D 35 lbs. for eAch I terIor shelf.
! A WAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE
ASSEMB ED UNIT.
! BE CAREFU WHEN MOVING THE ASSEMB ED FURNITURE AFTER THE SHE VES AND DOORS HAVE BEEN
INSTA ED, AS THIS MAY CAUSE THE SHE VES AND OTHER ITEMS TO BECOME UNSECURED AND FA .
! WHEN IN USE, THIS FURNITURE MUST BE P ACED ON A F AT, SO ID AND EVE SURFACE.
! DO NOT EAN ON THE TV WHEN IT IS ON THE TV STAND.
! DO NOT C IMB OR STEP ON THE STAND.
! DO NOT BANG INTO OR P ACE YOUR OWN WEIGHT ON THE SHE VES.

#
Acm 1
Acm 2
Acm 3
Acm 4
Acm 5
Acm 6
1
1
1
1
1
1
Quantity
Part
PARTS LIST
#
Acm 7
Acm 8
Acm 9
Acm 10
Acm 11
Acm 12
Acm 13
1
1
1
2
1
1
1
Quantity
Part

#
Acm 14
Acm 15
Acm 16
Acm 17
Acm 18
Acm 19
6
2
20
2
8
2
Quantity
Part
PARTS LIST
24 mm

ASSEMBLY INSTR CTIONS
fig. 1
fig. 1A
Acm9
Acm17
Acm3
Acm13
Acm19
Acm19
1. On a soft, flat surface, AttAch the Center Divider
Panel (ACM9) to the Bottom Panel (ACM3) using two
Wood Dowels (ACM17) as shown above. secure
the Divider Panel to the Bottom Panel using two
ong Thumbscrews (ACM19). tIGhte
Thumbscrews fully, and then remoVe the
Grip-Tip portion of the Thumbscrew once fully tight-
ened as shown in Fig. 1A. DONO DISCARD HE
GRIP- IP POR ION OF HE HUMBSCREWS,
YOU MAY NEED HEM O DISASSEMBLE HE
FURNI URE IN HE FU URE.
2. screW the Center Support Post (ACM13) into the
pre-threaded hole in the bottom center of the Bottom
Panel(ACM3). tIGhte fully by hand,
but be careful not to overtighten. NO E(!): he
Center Support Post has an Adjustable Leveling
Foot to ensure the center of the cabinet is
properly supported once assembled and in use.
URN the Leveling Foot to adjust.
!
ote: 2 PEOP E ARE RECOMMENDED TO ASSEMB E THIS FURNITURE. TO AVOID DAMAGE DURING ASSEMB Y, IT SHOU D BE ASSEMB ED ON
A SOFT SURFACE.