Belnick AL-DM0201-TXL-GG User manual

Thank you for your purchase!
AL-DM0201-TXL-GG /AL-DM0201-F-GG /AL-DM0201-Q-GG / AL-DM0201-K-GG
Before You Begin:
Please identify allcomponent parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly.Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use.Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product orcomponents may
result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where
included) tohelp prevent the unitfrom tipping and causing accidental injury,instability,deathor damage. The
tipping restraint isintended only as a safety measure, itisnot a substitute for proper adultsupervision.
To help prevent furniture from tipping over itmust be permanently attached tothe wall. Anti-Tip Safety Wall
Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.
Motorized Adjustable
Bed Base Frame
Customer Service Email: [email protected] | Phone: [phone]

Have a Question/Concern?
Quality products and first-class customer service are the cornerstone of long-lasting
consumer relationships. We strive toward excellence in all we do and want you to be
completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email address
or phone number shown below to assist you with any product questions or
issues before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any issues you
may have.
Customer Service Email: [e-mail]
Customer Service Phone: [phone]
Our Warranty Statement
This warranty covers manufacturing defects associated with your new product. The product is
warranted from the original purchase date and to the original purchaser for normal usage,
according to the below-referenced specifications and limitations.
•Non-moving metal parts are warranted for 5 years.
•Component parts including pneumatic cylinder, control mechanism, base and casters are
warranted for 2 years.
•All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and weight limits specified for the
product. In the absence of product-specific restrictions and weight limits, normal usage means use
for no more than forty hours per week by persons weighing 250 lbs. or less. Coverage terminates if
the product is sold or otherwise transferred. Repairs made by parties other than Belnick also void
this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence,
alteration, assembly, installation, attachments, accident, vandalism, acts of nature or any other
event beyond the control of Belnick; (2) tearing, scratching, scuffing, or blemishing of leather or
fabric; (3) cosmetic damage that may result from normal usage; (4) damage attributable to use by
persons exceeding specified weight limits or commercial use exceeding forty hours per week; or
(5) rust or other damage caused by exposure to moisture. The user assumes all risk of injury
resulting from use of this product. Liability for incidental or consequential damage is excluded.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.

Safety Precautions
Thank you for purchasing the adjustable bed.
PLEASE READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT
If unable to understand warning, cautions, and/or instructions, contact the dealer or technical
personnel if applicable, before attempting to use the equipment. Otherwise, injury or damage may
result.
This product is intended for household use only. This product is covered by a limited ten-years
warranty. Coverage is subject to limits and exclusions. See warranty for details.
Use this product only for its intended purpose.
Close supervision is necessary when this product is used by or near children or handicapped
individuals.
Never operate this product if it has a damaged cord or plug, or is not working properly. Keep
the product, remote control, wires and power supply away from heat.
Do not use this product in a humid environment. The connector part of the wire, and the gap
between the motor and the control box, cannot be exposed to liquid or high humidity.
Never use this product as a substitute for medical attention or treatment.
Consult your physician if you have any questions regarding the use of this product.
Do not use this product to treat any unexplained pain before consulting your physician. Stop
using the product if you experience pain or swelling.
Always unplug the product before attaching or detaching any parts or cleaning it.
Unplug the power cord and remove the remote control battery when the product is not used for
a prolonged period of time.
Do not let children play with or operate this product.
Do not allow children or pets underneath the bed.
RADIO FREQUENCY: 2.4 GHz
FCC COMPLIANCE:
The wireless equipment of this product conforms to the FCC certification standard.

Parts List
PART A:
Bed platform X 1 pcs
PART B: Mattress rail X 1 pcs PART C: Legs X 6 pcs
PART D: Remote controller X
1 pcs
PART E: Power Supply Box X
1pcs
PART F: Power Cable X 1pcs
PART G: DC extension cable X
1 pcs
PART H: AAA batteries X 2 pcs PART I: User Guide X 1 pcs

Assembly
1. Lay the carton flat on the floor and carefully cut it open.
2. Place the bed on the floor.
3. Remove and discard the plastic bag. Put together the two pieces of the bed and align them flat
& face down on the floor.
4. Cut the zip ties and take out allthe partsboxes and the mattress rail. Check that you have all
the necessary parts according to the parts list.
5. Assemble the Legs (Part C) by inserting the screwsinto the holes in the frame and turn
clockwise to tighten.

6. Connect DC Extension Cable (Part G) to the "Power" port (see 1st image below) on the
Control Box attached to the bed. Connect the other end of the DC Extension Cable to the Power
Supply Box (Part E). Connect the Power Cable (Part F)to the Power Supply Box (Part E) then
insert the plug into your nearby power outlet.
7.Insert (2) AAA Batteries (Part H) into the Part D remote control. then press any button. Ifthe
motor begins to run, unplug the power supply and turn the bed over to its right side-up position. If
the motor does not run, itneeds to re-match its code.
Matching code:
Method 1: Turn offthe power and wait for 10 seconds. Then plug the power again. You will see the
blue light on the control box (like first picture). Press and hold the top and bottom buttons at the
same time (as the second picture below shows). Release them when the white backlight flashes.
Finally,ifthe blue light in the controller turns to green, the code matches.
Method 2: Press "PAIR"button on the remote control twice. The blue light will appear (as the circle
shows in the first picture below). Press and hold the top and bottom buttons at the same time (as
the second picture below shows). Release them when the white backlight flashes. Finally,ifthe
blue light in the controller turns to green, the code matches
8. Insert the mattress rail Part B at the foot of the bed. Then the bed is ready for use.

Remote Control Functions:

Button Operation Button Operation
Memory Setting:
Setting a custom memory position.
1. Press the FLAT button to flatten the bed.
2. Adjust the bed to your preferred position by pressing the head and foot up/down buttons.
3. Press and hold button M and let go after you hear the “didi” sound that indicates the setting has
been successfully programmed.
Press and hold to raise the backrest.
Let go when the desired position is
reached.
Press and hold to raise the footrest.
Let go when the desired position is
reached.
Press FLAT button to flatten bed.
Press and hold to lower the footrest.
Let go when the desired position is
reached.
Press and hold to lower the backrest.
Let go when the desired position is
reached.
Click to set a zero gravity position.
Position Angle: HEAD-16°, FOOT-
35°
Click to set a user-defined position.
Click to set a Anti Snore Position.
Position Angle: HEAD-10°
Click to turn the LED flashlight on top
of the remote on and off.

Split King/Dual Twin XL Sync Instructions
Method 1：
1. Place two (2) Twin XL bases side by side.
2. With one remote, match the code for one bed. Follow the steps in matching code section.
Press and hold the top and bottom buttons (see image 1 below).
3. Using this same remote, code the other bed. Follow the steps in matching code section but
press and hold the left and right buttons (see image 2 below).
4. You can now use one remote to control both beds.
Method 2:
1. Place two(2) Twin XL bases side by side.
2. Using a sync cable (not included) to connect one bed to another.
3. Make sure that you plug the crystal head of sync cable into the port which marked on “SYNC ”
on the control box.
4. With one remote, match the code for one bed. Follow the steps in matching code section. Just
code for one bed.
5. You can use one remote to control two beds
* NOTE: (Sync cable is onlyfor split king model)

Troubleshooting:
If you experience problems with your adjustable bed, please follow these steps:
1.Press any button on the remote control to see whether the white backlight isbright. Ifit’s dim
or does not light, check the battery.
2.Check the green power indicator light on the power supply.Ifit’s not lit, check the power outlet.
3.Check for loose wires or connectors.
4.Check ifthe adjustable bed isassembled according to the above steps.
If your problems cannot be solved by the above steps, please contact us.