hayneedle Coral Coast Indoor/outdoor Mission Slat Rocking... User manual

For assistance with assembly, please contact customer service
1-888-880-4884
ITEM NAME: Coral Coast Indoor/outdoor Mission Slat Rocking Chair
SKU: MP081
1/5

PRE-ASSEMBLY PREPARATION:
!
DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT
•Please read through this instruction before beginning assembly.
•Two adults assembly is recommended.
•Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow
you to easily determine if all the pieces are present.
•Save all packing materials until assembly is complete to avoid accidentally discarding smaller
parts or hardware.
•Keep small parts and pieces away from children until fully assembly.
•Please check for any loose screws and tighten them before you use.
PANEL AND FITTINGS IDENTIFICATION:
2/5
38 mm
85 mm
840 mm
105 mm
445 mm
622 mm
1130 mm
585 mm
Right side (1) Qty: 1
585 mm
1130 mm
Left side (2) Qty: 1
525 mm
535 mm
558 mm
25 mm
Arm support (3) Qty: 1
Rockers (4) Qty: 2
Back (5) Qty: 1 Seat (6) Qty: 1 Front Rail (7) Qty: 1

HARDWARE LIST:
STEP-BY-STEP ASSEMBLY:
Identify and organize all Porch rocker parts before assembly. Referring to the illustration,
note the location of all predrilled screw holes and open any that may have paint covering them
1
2
Attach the Arm Support “3” to the Left Side “2”, using the (2) “B” screws and Phillips Screwdriver.
Attach the Rockers “4” to the bottoms of the Right Side “1” and Left Side “2”, using (4) “A” screw.
A
A
B
B
A
A
3/5
70 mm
15 mm
8.5 mm
30 mm
Screw 7x90x15 (A) Qty: 14 Screw 4x30 (B) Qty: 2 Hex wrench Qty: 1
Tool Required: Phillips Screwdriver

2
Attach the Seat “6”, Back “5” and Front Rail “7” to the Right Side “1”, using (5) “A” screws.
Attach the Seat “6”, Back “5” and Front Rail “7” to the Left Side “2”, using (5) “A” screws.
3
4/5
A
A
A
A
A
A
A
A
A
A