Belnick SG-SX-80415N-BR-GG User manual

Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets
may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent
the unit from tipping and causing any accidental injury, instability, death or damage. The tipping restraint is
intended only as a safety measure, it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping over it
ferent wall materials
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
ASSEMBLY INSTRUCTIONS
Customer Service Email: [email protected] | Phone: [phone]
SG-SX-80415N-BR-GG / SG-SX-80415N-GY-GG
Thank you for your purchase!
Mid-Century Modern
Pushback Recliner
Online Assembly Instructions: http://ftp.flashfurniture.com/AssemblyInstructions/SG-SX-80415N-GY-GG.pdf

Have a Question/Concern?
Quality products and first-class customer service are the cornerstone of long-
lasting consumer relationships. We strive toward excellence in all we do and
want you to be completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email
address or phone number shown below to assist you with any product
questions or issues before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any
issues you may have.
Customer Service Email: [e-mail]
Customer Service Phone: [phone]
Our Warranty Statement
This warranty covers manufacturing defects associated with your new product. The product
is warranted from the original purchase date and to the original purchaser for normal usage,
according to the below-referenced specifications and limitations.
•Non-moving metal parts are warranted for 5 years.
•Component parts including pneumatic cylinder, control mechanism, base and casters
are warranted for 2 years.
•All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and weight limits specified for
the product. In the absence of product-specific restrictions and weight limits, normal usage
means use for no more than forty hours per week by persons weighing 250 lbs. or less.
Coverage terminates if the product is sold or otherwise transferred. Repairs made by
parties other than Belnick also void this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence,
alteration, assembly, installation, attachments, accident, vandalism, acts of nature or any
other event beyond the control of Belnick; (2) tearing, scratching, scuffing, or blemishing of
leather or fabric; (3) cosmetic damage that may result from normal usage; (4) damage
attributable to use by persons exceeding specified weight limits or commercial use
exceeding forty hours per week; or (5) rust or other damage caused by exposure to
moisture. The user assumes all risk of injury resulting from use of this product. Liability for
incidental or consequential damage is excluded. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.

PARTS
STEP 1 STEP 2
STEP 3 STEP 4
(1) (2) (3) (4)A (4)B (5) (6)
(2)
(4)A
(3)
(3)
(3)
(3)
(4)A
(4)B
(4)B
(2)
(4)A
(4)A
(6)
(5)
(5)
(2)
(1)
BACK CUSHION
X1PC
SEAT FRAME
X1PC
PLASTIC
WASHER
X4PCS
REAR FOOT
X2PCS
FRONT FOOT
X2PCS
ALLEN WRENCH
BOLT
X2PCS X1PC
Using Plastic Washers (Part 3) x 4, attach Rear Feet (Part 4A) x 2
& front feet (Part 4B) x 2 by rotating clockwise to tighten.
Attach 2 rear feet (Part 4A) to seat frame (Part 2) using Bolts
(Part 5) x 2. Use Allen Wrench (Part 6) to tighten the bolts.
Slide the metal brackets on back cushion (Part 1) into the metal
glides on seat frame (Part 2). Lower the back cushion onto the
seat frame until it locks into place. Pull down the fabric flap and
using the hook and loop system.
NOTE: Ensure bracket
holes line up with bolt
holes in the seat when
tightened.