Belnick Parsons User manual

Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets
may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent
the unit from tipping and causing any accidental injury, instability, death or damage. The tipping restraint is
intended only as a safety measure, it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping over it
ferent wall materials
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
ASSEMBLY INSTRUCTIONS
Panel Back
Parsons Chair
Customer Service Email: [e-mail] | Phone: [phone]
Thank you for your purchase!
BT-350-BK-LEA-023-GG / BT-350-IVORY-050-GG / BT-350-BRN-LEA-008-GG

Have a Question/Concern?
Quality products and first -class customer service are the cornerstone of long -
lasting consumer relationships. We strive toward excellence in all we do and
want you to be completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email
address or phone number shown below to assist you with any product
questions or issues before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any
issues you may have.
Customer Service Email: [e-mail]
Customer Service Phone: 866 -
552
- 2810
Our Warranty Statement
This warranty covers manufacturing defects associated with your new product. The product
is warranted from the original purchase date and to the original purchaser for normal
usage, according to the below-referenced specificaons and limitaons.
.
Non-moving metal parts are warranted for 5 years.
Component parts including pneumac cylinder, control mechanism, base and casters
are warranted for 2 years.
All other items are warranted for 1 year.
Normal usage means use in compliance with the restricons and weight limits specified for
the product. In the absence of product-specific restricons and weight limits, normal usage
means use for no more than forty hours per week bypersons weighing 250 lbs. or less.
Coverage terminates if the product is sold or otherwise transferred. Repairs made by
pares other than Belnick also void this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence,
alteraon, assembly, installaon, aachments, accident, vandalism, acts of nature or any
other event beyond the control of Belnick; (2) tearing, scratching, scuffing, or blemishing of
leather or fabric; (3) cosmec damage that may result from normal usage; (4) damage
aributable to use by persons exceeding specified weight limits or commercial use
exceeding forty hours per week; or (5) rust or other damage caused by exposure to
moisture. The user assumes all risk of injury resulng from use of this product. Liability for
incidental or consequenal damage is excluded. Some states do not allow the exclusion or
limitaon of incidental or consequenal damages, so the above limitaon or exclusion may
not apply to you.
.
.

STEP 5
STEP 1
STEP 3
STEP 2
STEP 4
(1)X1
(5)X4
(2)X1
(6)X8
(3)X2
(7)X1
(4)X4
PARTS
(1)
(2)
(4)(6)
(1)
(2)
(5)(6)
(2)
(3)
Chair Back Seat Front Legs M8X55 mmHex Bolt
Hex Bolt Washer Allen Wrench
Align holes in
the underside
of the Seat
(Part 2) with
the holes in the
bottom of the
Chair Back
(Part 1).
Chair Back
Seat
Attach the Seat (Part
2) to the Chair Back
(Part 1) using (4)
M8X70 mm
Hex Bolts (Part 4) and
(4) Washers (Part 6).
Washer
Seat Front
Chair Back
Insert (2) Front Legs (Part
3) into the underside of
Seat (Part 2).
Seat
Leg Attach Front Legs using (5)
M8X70 mm Hex Bolts (Part 5) and
(4) Washers (Part 6). Tighten using Allen Wrench (Part 7).
M8X70mm
M8X55mm
Hex Bolt