Belnick SB-TB269-NAT-GG User manual

Thank you for your purchase!
Customer Service Email: [e-mail] | Phone: 866-552
-2810
SB-TB269-NAT-GG / SB-TB269-GRY-GG
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may
result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where
included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The
tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision. To help
prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps
suitable for the unit weight and wall materials (if not included) should be purchased and installed.
55" x 31" Commercial Grade
Outdoor Dining Table with Faux
Teak Poly Slats and Steel Frame
3

M6*55
M6*30
8PCS
4PCS
Allen Wrench
Screws
Screws 2PCS
Short Legs
Wide Legs
Table
Top
2PCS
1PCS
Attach(2)Short Legs (Part D) to Table Top (Part F) using
(4) M6*35 Screws (Part B). Tighten using Allen Wrench
(Part C).
Attach(2)Wide Legs (Part E) to the Short
Legs (Part D) using (8) M6*55 Screws (Part A).
Tighten using Allen Wrench (Part C)
M6*55 Screws
C ALLEN WRENCH
D Short Legs
F TABLE TOP
B M6*35 SCREWS
C ALLEN WRENCH

Return table to the upright position.
STEP 3
Quality and Safety Guidelines:
Please follow the static and dynamic weight capacity limits provided
on this item. If you are unsure of the weight capacities for this
product, email us at customerexperience@ belnick.com or call
866-552-2810.
Please use this item on a stable, level surface only. All table legs
should contact the flooring surface when in use. Do not use this item if
any instability is detected.
For maintenance instructions and replacement parts, please email us
at [e-mail] or call 866-552-2810.
This item is intended as a table only, do not climb, stand or
sit on this item.
For product longevity, product safety and product integrity, protect
from extended periods of wet weather and store indoors in a dry
location. For additional storage instructions, please email us at
[e-mail] or call 866-552-2810.
Please visit www.Belnick.com for our product warranty details or email
us at [e-mail] or call 866-552-2810.