Bend-Pak XPR-10A User manual

DIMENSIONS ARE IN MM
☺
A
5
1
3
4
2
7
DETAIL A
SCALE 1 : 12
10
11
8
9
6
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5245044 XPR-7A/10A LIFT SUPERSTRUCTURE 1 C
2 5250003 XPR-10A PARTS BOX 1 B
3 5210369 XPR-7A/10A LOW PROFILE LONG ARM ASSEMBLY, R.H. 1 C
4 5210171 XPR-7A/10A LOW PROFILE LONG ARM ASSEMBLY, L.H. 1 J
5 5210170
XPR-7A/10A LOW PROFILE TRIPLE TELESCOPING ARM
ASSEMBLY
2 K
6 5905109 WARNING ALI/WL 101 1 -
7 5905131 2 POST DECAL KIT, LESS ALI 1 B
8 5905403 MAX CAP DANGER 10K 1 -
9 5905465 MANUFACTURER LABEL 1 -
10 5905940 PRODUCT DATA LABEL 1 -
11 5930630 XPR-10A SERIAL TAG 1 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5260455 10/08/2014 TM 00663
B
REPLACED 5250056 WITH 5250003, UPDATED
BOM REVISIONS
11/24/2014 TM 00673
C
ADDED 5905109, 5905131, 5905403, 5905465,
5905940, 5930630, UPDATED BOM REVISIONS
05/15/2015 TM 00689
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5260088
XPR-10A PRODUCTION
LIFT VER E
10/08/2014
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ALL LABELS TO BE APPLIED TO POSTS AFTER PAINTING. 2.
SEE ATTACHED LABEL PLACEMENT SHEET.
5930630 TO BE ADDED BY REQUEST ONLY 3.

2700- 2903
3678
108-1860.6mm[3.5-72.5"]
140mm [5.5"] ADAPTER
318-2070.6mm [11.4-80.75"]
WITH 70mm [2.75"] &
B B
2382- 2585
DRIVE THRU
3480- 3684
3386- 3590
595-1110mm
1024-1474mm
SECTION B-B
SCALE 1 : 35
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260088
XPR-10A PRODUCTION
LIFT VER E
1:45
SCALE:

2-Post Lifts Product Decal Positioning
AB
BPK Post Lift Decal.pdf
Material: Clear Adhesive PET
Size: 4.25”W x 38”H
Thickness: 4 Mil
Finish: Polished
Ink: U.V. protected, Opaque White
Print Process: Silk Screen, 85 line-screen (Yellow
color in file represents what should be clear PET
material and SHOULD NOT print as Yellow ink.
White area in file represents Opaque White ink.)
Lamination: Clear-gloss over-laminate for abrasion,
chemical, and ultra violet protection
PN 5905311
PN 5905555
*Place on back of Powerside Post.
2-Post Safety Decal.pdf:
Size: 4”W x 28.75”H
Material: White Vinyl Pressure Sensitive
Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-
screen or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate
for abrasion, chemical, and ultra violet
protection
Danger
Warning
Long wheelbase vehicles can damage lift
and/or cause personal harm or injury to
operators if loaded incorrectly.
All vehicles MUST be positioned on lift with
CENTER OF GRAVITY midway between adapters.
Failure to read, understand and
follow these instructions may
cause death or serious injury. Read
and understand these instructions
before using lift.
WIRE ROPE INSPECTION AND MAINTENANCE
• Liftingcablesshouldbereplacedevery(3)threeyearsor
 whenvisiblesignsofdamageareapparent.DONOTUSE
 LIFTWITHDEFECTIVEORWORNCABLES.
• Wireropeshouldbemaintainedinawell-lubricated
 conditionatalltimes.Wireropeisonlyfullyprotectedwhen
 eachwirestrandislubricatedbothinternalandexternal.
 Excessivewearwillshortenthelifeofthewirerope.The
 factorysuggestswireropelubricantthatpenetratestothe
 coreoftheropeandprovideslong-termlubricationbetween
 eachindividualstrand.Inordertomakesurethattheinner
 layersoftheroperemainwelllubricated,lubricationshould
 becarriedoutatintervalsnotexceedingthree(3)months
 duringoperation.
• Allsheavesandguiderollersincontactwiththemoving
 wireropeshouldbegivenregularvisualchecksforsurface
 wearandlubricatedtomakesurethattheyrunfreely.This
 operationshouldbecarriedoutatappropriateintervals
 generallynotexceedingthree(3)monthsduringoperation.
 Forallsheaveaxles,thefactoryrecommendsstandard
 wheelbearinggrease.Forallsheavesand/orguiderollers,
 thefactoryrecommends90-WTgearoilorsimilarheavy
 lubricantappliedbyanymethodincludingpump/spray
 dispensing,brush,handand/orswabbing.
NEVER LIFT ANY VEHICLE IN ANY MANNER WITH LESS
THAN FOUR (4) ARMS. RATED CAPACITY OF EACH
LIFT ARM IS NO GREATER THAN ONE FOURTH (1/4)
OF THE OVERALL LIFTING CAPACITY.
IMPORTANT
OPERATION / MAINTENANCE
INSTRUCTIONS - PLEASE READ
TO RAISE LIFT
3ReadOperatingandSafetymanualsbeforeusinglift.
3Alwaysliftvehicleaccordingtomanufacturer’srecommended
 liftingpoints.
3Positionvehiclebetweencolumns.Adjustswingarmssothat
 vehicleispositionedwiththecenterofgravitymidway
 betweenpads.
3Positionliftcontactpadsatmanufacturersrecommended
 liftingpoints.
3Usetruckadaptersasneeded.Neverexceed9”ofpad/adapter
 height.
3RaiseliftbypressingRAISEBUTTONonpowerunituntilcontact
 padsmakecontactwiththeundersideofthevehicle.
3Rechecktomakesurevehicleissecure.
3Raisevehicletodesiredworkingheightthenpresspowerunit
 LOWERINGHANDLEuntilliftcarriagesrestontonearestsafety
 lockposition.
3Maintainvisualcontactwithvehicleandsurroundingareaatall
 timeswhileraisinglift.
3STOP IMMEDIATELYifloadshiftsorbecomesunlevel.
3Alwaysensuresafetylocksareengagedbeforeanyattemptis
 madetoworkonornearvehicle.
3Alwaysensureliftcontactpadsaremakingfullcontactwithvehicle
 beforeanyattemptismadetoworkonornearvehicle.
TO LOWER LIFT
3RaiseliftbypressingRAISEBUTTONonpowerunit.Elevateliftat
 leasttwoinchestoallowadequateclearanceforthelockstoclear.
3ClearsafetylocksbymaintainingpressureonSAFETYLOCK
 RELEASEHANDLEtoitsfurthesttravel.
3Besuretooltrays,standsorpersonnelareremovedfrom
 undervehicle.
3Lowervehiclebypressingpowerunitloweringhandleuntillifthas
 descendedcompletely.
3Maintainvisualcontactwithvehicleandsurroundingareaatall
 timeswhileloweringlift.
3STOP IMMEDIATELYifloadshiftsorbecomesunlevel.
3Beforeremovingvehiclefromliftarea,positionliftarmstoprovide
 unobstructedexit.
3NEVER,driveoverliftarms.
REQUIRED MONTHLY MAINTENANCE
3ALWAYSconsultoperationmanualforfactoryrecommended
 maintenance.
3Checkarmrestraintsforproperoperation.
3Checkallchain/cableconnections,boltsandpinstoinsure
 propermounting.
3Visuallyinspectsafetylocksforproperoperation.
3Visuallyinspectconcreteoor.DONOTUSELIFTifconcrete
 foundationshowssignsofdeterioration.
3Inspectallanchorboltsandretightenifnecessary.
3Checkcolumnsforsquarenessandplumb.
3Inspectallpivotpinsmakingsuretheyareproperlysecured.
3Checkequalizercabletension–cablesmusthaveequaltension-
 adjustifnecessary.
3Inspectallliftpads,replaceifnecessary.
3Ifliftisequippedwithoverheadcut-offswitch,checkfor
 properoperation.
WARNING!
1. WARNING:Ifcementanchorboltsareloose,oranycomponentof
 theliftisfoundtobedefective,DO NOT USE LIFT!
2. Neveroperatetheliftwithanypersonorequipmentbelow.
3. Neverexceedratedcapacity.
4. Alwaysinsuresafetylocksareengagedbeforeanyattemptismade
 toworkonornearvehicle.
5. Neverleaveliftinanelevatedpositionunlessthesafetylocks
 areengaged.
6. Donotpermitelectricmotortogetwet!Motordamagecausedby
 dampnessisnotcoveredunderwarranty.
CAUTION
BendPak, Inc.®P/N 5905555
USe PrOPer aDaPTerS
Do not attempt to lift trucks or other frame type vehicles
with standard at contact pads. Frame cradle contact pads
are recommended for use when lifting trucks, vans, or other
frame vehicles. NEVER use lift with missing or damaged
rubber pads. ALWAYS REPLACE rubber contact pads
when worn or damaged. Contact BendPak or your
BendPak dealer for product information.
FRAME CRADLE
CONTACT PADS
Danger
SKU# 5215506
P/N 5905311
1645 Lemonwood Drive
Santa Paula, CA 93060
U.S.A.
[phone]
www.bendpak.com
Above-Ground Lifts

2-Post Lifts Product Decal Positioning
C
F G
H
D
E
*Depends on Lift model capacity
ALI Blue
PN 5905177
*Place on both Posts.
ALI Yellow ALI Orange
PN 5905940
LR-60_Warning_Instructions_Label.pdf:
Size: 3”W x 1.75”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-screen or
300 p.p.i. for digital
Lamination: Clear-gloss over-laminate for abrasion,
chemical, and ultra violet protection
Product_Data_Label.pdf:
Size: 4.5”W x 2.3”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-screen
or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate for abrasion,
chemical, and ultra violet protection
*Max. Cap. Danger.pdf:
Size: 4”W x 5”H
Material: White Vinyl Pressure Sensitive
Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-
screen or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate
for abrasion, chemical, and ultra violet
protection

2-Post Lifts Product Decal Positioning
A
Powerside Post
H
E
F
D
C
*B
G
Place on backside of
powerside post and
at 62” from ground to
top of decal.

DIMENSIONS ARE IN MM
☺
A
B
C
E
4
19
22
DETAIL A
SCALE 1 : 12
16
14
15
21
20
DETAIL B
SCALE 1 : 12
1
17
7
11
8
5
13
12
2
9
10
DETAIL C
SCALE 1 : 4
3
6
DETAIL E
SCALE 1 : 4
18
24
23
25
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G
ADDED (2) 5540075, REPLACED 5530314
WITH 5530261, REPLACED 5540001 WITH
5540075, UPDATED TITLE TO REFLECT WHERE
USED, UPDATED BOM REVISION AND NEXT
ASSEMBLIES
06/17/2013 TM 00605
H UPDATED BOM REVISION 06/02/2014 TM 00649
J
REPLACED 5505113 WITH 5505001, UPDATED
NEXT ASSEMBLY
10/06/2014 TM 00663
NEXT ASSEMBLY
5250056
5250186
5250199
5250213
5250227
5250228
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5505001 GP-7/PL-6000/XPR SERIES SAFETY CLEVIS PIN 2 A
2 5715196 XPR PLASTIC COVER BLOCK 105 x 80 2 C
3 5535022 NUT 9/16"-18 JN 1 -
4 5550113 FTG ELB -04 NPT L x -04 JIC 2 -
5 5550183 FTG ELB -06 JIC -06L ORB 1 -
6 5550003 FTG TEE -04JIC -04JIC -06JIC 1 -
7 5505350 MODEL#211 HAIR PIN/ LARGE 2 -
8 5530261 PHPS M6 x 1 x 10 4 -
9 5545347 WASHER, M12 FLAT WASHER 2 -
10 5535354 NUT M12 x1.75 2 -
11 5520001 RUBBER GROMMET, 3/4 I.D. 1 -
12 5535001 NUT M8 x 1.25 NL 4 A
13 5530010 HHB M8 x 1.25 x 25 4 -
14 5545200 WASHER M10 x Ø18 SL 4 -
15 5535998 NUT M10 x 1.5 4 -
16 5530760 HEX HEAD BOLT M10x1.25x35 4 -
17 5540075 2.5 WIRE DIA., Ø20.5 x 75 LG 4 A
18 5530750 STS M4.2 x 1.7 x 6 2 -
19 5545535 C WASHER SHIM FOR LIFTS 20 -
20 5545341 WASHER M10 x Ø20 FLAT 4 -
21 5535013 NUT M10 x 1.5 NL 4 -
22 5505031 ROTOR CLIP 12mm SS 1 -
23 5530115 BHS 6-32 x 1.25 2 -
24 5535190 HN 6-32 2 -
25 5520140 ROMEX CONNECTOR 3/8 #6623 2 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5174518
XPR CLEARFLOOR
PARTS BAG
02/11/2010
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
MR 10/22/2014
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
1
2
3
4
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600425 XPR-10A LOW PROFILE TRIPLE TELESCOPING ARM WELDMENT 1 J
2 5545341 WASHER M10 x Ø20 FLAT 3 -
3 5545200 WASHER M10 x Ø18 SL 3 -
4 5530302 HHB M10 x 1.5 x 40 3 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H UPDATED BOM REVISION 02/13/2014 TM 00640
J UPDATED BOM REVISION 04/25/2014 TS 00649
K UPDATED TITLE TO REFLECT WHERE USED 11/25/2014 TM 00673
NEXT ASSEMBLY
5260086
5260087
5260088
5260089
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5210170
XPR-7A/10A LOW PROFILE
TRIPLE TELESCOPING ARM
ASSEMBLY
01/13/2010
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
VB 12/23/2014
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
2
3
4
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600068 XPR-10A LOW PROFILE LONG ARM WELDMENT, L.H. 1 H
2 5545341 WASHER M10 x Ø20 FLAT 3 -
3 5545200 WASHER M10 x Ø18 SL 3 -
4 5530302 HHB M10 x 1.5 x 40 3 -
NEXT ASSEMBLY
5260086
5260087
5260088
5260089
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G
UPDATED BOM REVISION AND TITLE TO
REFLECT WHERE USED
02/12/2014 TM 00640
H UPDATED BOM REVISION 06/02/2014 TM 00649
J
UPDATED TITLE TO REFLECT WHERE USED AND
NEXT ASSEMBLIES
11/25/2014 TM 00673
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5210171
XPR-7A/10A LOW PROFILE
LONG ARM ASSEMBLY, L.H.
01/12/2010
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
VB 12/23/2014
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
A
9
2
12
15
18
13
6
11
4
1
5
3
8
17
19
7
DETAIL A
SCALE 1 : 6
9
16
10
14
ITEM
NO
PART NUMBER DESCRIPTION QTY REV
1 5600926 XPR-10A INNER TOP TROUGH WELDMENT 1 A
2 5600925 XPR-10A OUTER TOP TROUGH WELDMENT 1 A
3 5565350 GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 2 C
4 5575112 GP/PCL/XPR/PL-7000 SAFETY SHEAVE 2 C
5 5575111 XPR-7/9/10 SHEAVE ASSEMBLY 4 E
6 5620141 XPR-7/9/10 CABLE SHEAVE PIN WELDMENT 4 E
7 5530030 HHB M6 x 1 x 8 4 -
8 5530756 HHB M6 x 1 x 25 2 -
9 5530738 HHB M10 x 1.5 x 25 6 -
10 5535013 NUT M10 x 1.5 NL 2 -
11 5535357 NUT M6 x 1.0 NL 2 -
12 5545341 WASHER M10 x Ø20 FLAT 6 -
13 5580211 STEEL HOLE PLUG 1 1/4" 1 -
14 5620445 XPR TRIP STOP BAR SLIDER WELDMENT 1 C
15 5300815 XPR STOP BAR CUSHION 1 C
16 5530055 SSS M6x1x10 2 -
17 5545200 WASHER M10 x Ø18 SL 4 -
18 5535998 NUT M10 x 1.5 4 -
19 5600501 XPR-10/10A MICROSWITCH STOP BAR WELDMENT 1 B
NEXT ASSEMBLY
5245044
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5210203 10/07/2014 TM 00663
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5210211
XPR-7A/10A TOP
TROUGH ASSEMBLY
10/07/2014
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

3368
3571
EXTENDED
COLLAPSED
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5210211
XPR-7A/10A TOP
TROUGH ASSEMBLY
1:15
SCALE:

DIMENSIONS ARE IN MM
☺
1
2
3
4
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600842
XPR-10A LOW PROFILE LONG ARM WELDMENT,
R.H.
1 B
2 5545341 WASHER M10 x Ø20 FLAT 3 -
3 5545200 WASHER M10 x Ø18 SL 3 -
4 5530302 HHB M10 x 1.5 x 40 3 -
NEXT ASSEMBLY
5260086
5260087
5260088
5260089
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215171 02/12/2014 TM 00640
B UPDATED BOM REVISION 06/02/2014 TM 00649
C
UPDATED TITLE TO REFLECT WHERE USED AND
NEXT ASSEMBLIES
11/25/2014 TM 00673
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5210369
XPR-7A/10A LOW PROFILE
LONG ARM ASSEMBLY, R.H.
01/12/2010
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
VB 12/23/2014
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
2
1
7
6
4
8
3
5
9100
NEXT ASSEMBLY
5215388
5215389
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600503 XPR-10/10A LIFT HEAD WELDMENT 1 J
2 5716001 PL-6000/7000, GP/XPR SERIES GUIDE BLOCK 8 E
3 5746098 GP/RTL, XPR-9/10 Ø25mm GEAR SHAFT 2 D
4 5701052 GP/RTL/XPR ARM INTERNAL GEAR STOP 2 E
5 5540133 GP-7, RTL-8000, XPR-9/10 LIFT HEAD SPRING 2 C
6 5505106 SPRING PIN M6 x 50 2 -
7 5540006 SNAP RING TRUARC 5103-100 2 -
8 5580219 KEYRING 56mm x 3mm 2 -
9 5930183 XPR-7/9/10 LIFT HEAD GUSSET COVER 1 D
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H UPDATED BOM REVISION 06/04/2014 TM 00649
J UPDATED BOM REVISION 11/19/2014 TM 00673
K UPDATED BOM REVISION 05/14/2015 TM 00689
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215387
XPR-10/10A LIFT
HEAD ASSEMBLY
08/30/2010
DO NOT SCALE DRAWING
1:12
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
4
7
2
3
8
5
6
9
10
11
12
NEXT ASSEMBLY
5245044
5245227
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600386 XPR-7TR/10 POWER SIDE POST WELDMENT 1 G
2 5575111 XPR-7/9/10 SHEAVE ASSEMBLY 1 E
3 5620141 XPR-7/9/10 CABLE SHEAVE PIN WELDMENT 1 E
4 5575112 GP/PCL/XPR/PL-7000 SAFETY SHEAVE 1 C
5 5565350 GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 1 C
6 5535357 NUT M6 x 1.0 NL 1 -
7 5530756 HHB M6 x 1 x 25 1 -
8 5530030 HHB M6 x 1 x 8 1 -
9 5520001 RUBBER GROMMET, 3/4 I.D. 1 A
10 5215387 XPR-10/10A LIFT HEAD ASSEMBLY 1 K
11 5502300 CYLINDER ASSEMBLY Ø2.0 x 69 1 E
12 5701716 XPR LIGHT DUTY CYLINDER STOPPER 1 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
L
L-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
06/04/2014
10/16/2014
TM
TM
00649
00663
M UPDATED BOM REVISIONS 11/19/2014 TM 00673
N UPDATED BOM REVISION 05/14/2015 TM 00689
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
N
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215388
XPR-7A/10/10A POWER
SIDE POST ASSEMBLY
08/30/2010
DO NOT SCALE DRAWING
1:22
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
4
7
2
3
8
5
6
9
10
11
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600387 XPR-7TR/10 OFF SIDE POST WELDMENT 1 E
2 5575111 XPR-7/9/10 SHEAVE ASSEMBLY 1 E
3 5620141 XPR-7/9/10 CABLE SHEAVE PIN WELDMENT 1 E
4 5575112 GP/PCL/XPR/PL-7000 SAFETY SHEAVE 1 C
5 5565350 GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 1 C
6 5535357 NUT M6 x 1.0 NL 1 -
7 5530756 HHB M6 x 1 x 25 1 -
8 5530030 HHB M6 x 1 x 8 1 -
9 5215387 XPR-10/10A LIFT HEAD ASSEMBLY 1 K
10 5502300 CYLINDER ASSEMBLY Ø2.0 x 69 1 E
11 5701716 XPR LIGHT DUTY CYLINDER STOPPER 1 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
L
L-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
06/04/2014
10/16/2014
TM
TM
00649
00663
M UPDATED BOM REVISIONS 11/19/2014 TM 00673
N UPDATED BOM REVISION 05/14/2015 TM 00689
NEXT ASSEMBLY
5245044
5245227
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
N
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215389
XPR-7A/10/10A OFF SIDE
POST ASSEMBLY
08/30/2010
DO NOT SCALE DRAWING
1:22
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
2
1
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C UPDATED BOM REVISION 01/14/2011 TM 00431
D
D-001
D-002
D-003
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
06/17/2011
06/21/2011
03/08/2012
06/27/2012
MT
MT
MT
TM
00463
00461
00490
00531
E
E-001
E-002
E-003
E-004
UPDATE BOM REVISION AND NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
12/19/2012
03/14/2013
06/21/2013
10/16/2014
03/24/2015
TM
TM
TM
TM
MR
00572
00586
00605
00663
00691
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600588 ROUND LIFT PAD WELDMENT 1 B
2 5715017 ROUND LIFT PAD ADAPTER RUBBER PAD 1 D
NEXT ASSEMBLY
5210163 5250214
5250056 5250222
5250057 5250223
5250080 5250224
5250113 5250225
5250128 5250227
5250186 5250228
5250190 5250242
5250199 5250243
5250213 5150561
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215507
ROUND LIFT PAD
ADAPTER ASSEMBLY
12/30/2010
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
TM 03/25/2015
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
1
2
NEXT ASSEMBLY
5260081
5260082
5260083
5260084
5260086
5260087
5260088
5260089
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5215388 XPR-7A/10/10A POWER SIDE POST ASSEMBLY 1 N
2 5215389 XPR-7A/10/10A OFF SIDE POST ASSEMBLY 1 N
3 5210211 XPR-7A/10A TOP TROUGH ASSEMBLY 1 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5245228 10/07/2014 TM 00663
B UPDATED BOM REVISIONS 11/21/2014 TM 00673
C UPDATED BOM REVISIONS 05/14/2015 TM 00689
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5245044
XPR-7A/10A LIFT
SUPERSTRUCTURE
10/07/2014
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
NEXT ASSEMBLY
5260083
5260088
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5174518 XPR CLEARFLOOR PARTS BAG 1 J
2 5505116 XPR-7/7A/9/10 LIFT HEAD PIN WELDMENT 4 C
3 5595073 XPR-7A/10A CABLE ASSEMBLY Ø10 x 9999mm DBST 1 A
4 5595072 XPR-7A/10A CABLE ASSEMBLY Ø10 x 10115mm DBST 1 A
5 5570832
XPR CLEARFLOOR HYDRAULIC HOSE ASSY Ø6.35 x
2299mm SB
1 E
6 5570017 XPR HYDRAULIC HOSE ASSY Ø10 x 1219mm SB 1 C
7 5595047 XPR-7A/10/10A/7TR Ø2.4 x 7747 SAFETY CABLE 1 D
8 5570058 XPR-7A/10A HYDRAULIC HOSE ASSY Ø6.35 x 8090 SB 1 A
9 5570065
XPR-7A/10A HYDRAULIC HOSE EXTENSION ASSY
Ø6.35 x 203mm DS
1 B
10 5210007 XPR POWER SIDE SAFEY ASSEMBLY 1 F
11 5210010 XPR OFF SIDE SAFETY WELDMENT 1 E
12 5715003 POWER UNIT VIBRATION DAMPENER 1 B
13 5215507 ROUND LIFT PAD ADAPTER ASSEMBLY 4 E
14 5730663
GP-7/RTL-8000/XPR-7/9/10 POST ASSEMBLY LIFT
HEAD FOOT GUARD R.H.
2 D
15 5730664
GP-7/RTL-8000/XPR-7/9/10 POST ASSEMBLY LIFT
HEAD FOOT GUARD L.H.
2 D
16 5736604
TWO POST LIGHT DUTY BOLT ON ARM RESTRAINT
GEAR
4 E
17 5600163 XPR CLEARFLOOR POWER SIDE SAFETY COVER 1 D
18 5210009
XPR-7A/7TR/7TRFD/ 9D/10/12/12FD/15/18C OFF SIDE
SAFETY COVER
1 D
19 5746389 GP/XPR SHORT LIFT PAD EXTENSION (95mm LG.) 4 B
20 5746390
GP/XPR/RJ/MD-6XP MEDIUM LIFT PAD EXTENSION
(113mm LG.)
4 D
21 5746395 GP/XPR/RJ LONG LIFT PAD EXTENSION (182mm LG.) 4 C
22 5545342 WASHER M18 FLAT 2 -
23 5535358 NUT M18 x 2.5 NL 2 -
24 5540281 C RING Ø38mm OD 5103-150 4 -
25 5746167 DOUBLE THREADED ROD M10 x 1.5 x 275 2 B
26 5716634 XPR MICROSWITCH COVER, PLASTIC 1 A
27 5550095 FTG NPL -04 JIC x -04 JIC 1 -
28 5530307 AB 3/4" x 5" 12 -
29 5525150 SPDT MICRO SWITCH;25A@125VAC 1 -
30 5525112 MICRO SWITCH COVER-5PA2 1 -
31 5520116 14-4 SJO UL 62 CABLE 300vac 3635mm* -
32 5905151 SAFETY TIPS CARD ALI-ST 90 1 -
33 5900147 SAFETY MANUAL ALI / SM 93-1 1 -
34 5900152
ALIGN OIM OPERATION INSPECTION &
MAINTENANCE
1 -
35 5900280 ALI/LP FRAME ENGAGING LIFTS GUIDE 1 -
36 5900151 BENDPAK #90 WARRANTY CARD 1 -
37 5900047 XPR-7A/10/10A INSTALLATION MANUAL 1 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5250003 11/28/2014 TM 00673
B
ADDED 5746389, REPLACED 5540129 WITH
5540281, REMOVED 5905109, 5905131,5905403,
5905465, 5905940, 5930630, UPDATED BOM
REVISION
05/15/2015 TM 00689
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5250003
XPR-10A PARTS BOX
11/28/2014
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
NOTE: UNLESS OTHERWISE SPECIFIED .
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
INSERT PARTS BAG INTO PARTS BOX FOR SHIPMENT 2.
THREAD 5535358 WITH 5545342 ONTO CABLES FOR SHIPMENT 3.
HOSES AND CABLES IN REPRESENTATIONAL FORM 4.
FOR 5220116 SPECIFICATIONS REFER TO PART SPECIFICATION 5.
FORM (*)5520116 QTY FOR REFERENCE ONLY

1 18
11
13
3
7
5
6
8
21
16
2
14
19
12
10
17
15
22
23
4
24
25 26
9
27
28
36
32
33
34
35
37
29
30
31
20
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5250003
XPR-10A PARTS BOX
1:25
SCALE:

1219
13 2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
A-001
A-002
PRODUCTION RELEASE, DERIVED FROM 800399
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
08/27/2009
09/08/2010
04/18/2011
TM
TM
MT
00293
00396
00454
B
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLIES
01/12/2012 TM 00490
C
C-001
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
06/21/2013
10/16/2014
TM
TM
00605
00663
NEXT ASSEMBLY
5250222 5250227
5250056 5250228
5250057 5250229
5250199 5250242
5250213 5250243
5250214 5250245
5250223 5250248
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570116 Ø10 ID HYDRAULIC HOSE 1144mm* -
2 5550337 FTG ELB -06 CRIMP x -06 JIC 1 -
3 5550336 FTG NPL -06 CRIMP x -06 JIC 1 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
SIZE:
MATERIAL:
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570017
XPR HYDRAULIC HOSE ASSY
Ø10 x 1219mm SB
--
--
08/27/2009
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
MR 10/23/2014
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
ANGULAR: MACH 2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART 1.
SPECIFICATION FORM
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.