Bend-Pak PL-6KDT User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
PL-6KDT
PRODUCT SKU
5175157
DRAWING Nº
5260640
CATEGORY
Parking Li
REV
Version F
DATE
12.22.2021

DIMENSIONS ARE IN MM
☺
3
1
4
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5245118 PL-6KDT SUPERSTRUCTURE 1 B
2 5250309 PL-6KDT PARTS BOX 1 B
3 5502048 CYLINDER ASSEMBLY Ø3.250 x47.635, FAST 2 B
4 5216010 PL-6K MULTI SAFETY LATCH BAR ASSEMBLY 2 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D
REPLACED LABELS WITH COLORS & GRAPHICS
NOTE
09/28/2021 CA 01347
E UPDATED BOM REVISION 10/19/2021 OR 01357
F UPDATED BOM REVISION 11/23/2021 TM 01366
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5260640
PL-6KDT PRODUCTION
LIFT VER B
10/27/2020
DO NOT SCALE DRAWING
1:50
SCALE:
THIRD ANGLE PROJECTION
OR 11/23/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.

185.613in
4714.6mm
95.268in MAX
2419.8mm MAX
8.110in
206.0mm
122.748in
3117.8mm
211.457in
5371.0mm
102.472in
2602.8mm
93.469in
2374.1mm
224.449in
5701.0mm
236.543in
6008.2mm
210.699in
5351.8mm
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260640
PL-6KDT PRODUCTION
LIFT VER B
1:70
SCALE:

91.134in
2314.8mm
81.134in
2060.8mm
1st AND 2nd LOCK
31.134in
790.8mm
41.134in
1044.8mm
7th AND 6th LOCK
SHEET 3 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260640
PL-6KDT PRODUCTION
LIFT VER B
1:45
SCALE:

DIMENSIONS ARE IN MM
☺
1
8
4
2
5
6
9
3
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5260640
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601204 PL-6K POWER POST WELDMENT 1 A
2 5601205 PL-6K CONTROL POST WELDMENT 1 A
3 5601206 PL-6K CLOSEOUT POST WELDMENT 2 A
4 5215683 PL-6K CLOSEOUT CROSSBEAM ASSEMBLY 1 G
5 5216013 PL-6K POWER SIDE CLOSEOUT CROSSBEAM ASSEMBLY 1 B
6 5216012 PL-6K CENTER CROSSBEAM ASSEMBLY 1 B
7 5770127 PL-6KDT REAR BEAM 1 C
8 5770128 PL-6KDT FRONT BEAM 1 D
9 5215684 PL-6K RAMP ASSEMBLY 2 K
WHERE USED
PL-6KDT
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5245053 10/26/2020 CA 01218
B UPDATED BOM REVISIONS 08/11/2021 TM 01324
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5245118
PL-6KDT
SUPERSTRUCTURE
10/26/2020
DO NOT SCALE DRAWING
1:60
SCALE:
THIRD ANGLE PROJECTION
OR 08/17/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
A
B
4
2
15
1
5
3
6
14
16
DETAIL A
SCALE 1 : 8
10
7
9
8
DETAIL B
SCALE 1 : 8
813
11
12
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H
WAS 4233 NOW 4162, REMOVED 5701184,
5701185, (6) 5545341, (6) 5545200, (6)
5530021, (6) 5535013, UPDATED BOM
REVISIONS
08/10/2018 TM 00985
J UPDATED BOM REVISIONS 09/05/2018 TM 00994
K REPLACED 5545021 WITH 5545341 03/27/2019 CA 01067
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5701170 PL-6K RAMP SECTION 17 B
2 5215678 PL-6K RAMP SIDE RAIL ASSEMBLY, R.H. 1 G
3 5215677 PL-6K RAMP SIDE RAIL ASSEMBLY, L.H. 1 G
4 5600957 PL-6K RAMP UPPER STRUT WELDMENT 1 B
5 5601131 PL-6K RAMP LOWER DOUBLE STRUT WELDMENT 1 B
6 5600958 PL-6K RAMP LOWER STRUT WELDMENT 1 A
7 5545202 WASHER M8 x Ø15 SL 52 --
8 5545341 WASHER M10 x Ø20 FLAT 64 --
9 5535001 NUT M8 x 1.25 NL 52 --
10 5530010 HHB M8 x 1.25 x 25 52 --
11 5545200 WASHER M10 x Ø18 SL 4 --
12 5530021 HHB, M10 x 1.5 x 30 4 --
13 5535013 NUT M10 x 1.5 NL 12 --
14 5530228 SHCS M10 x 1.5 x 30mm 8 --
15 5716040 PL-6K RAMP PLASTIC FOOT BLOCK 4 B
16 5601132 PL-6K DRIVE ON RAMP WELDMENT 1 B
NEXT ASSEMBLY
5245118
5245119
5245127
5245141
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215684
PL-6K RAMP ASSEMBLY
03/12/2015
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
CA 04/05/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

95.984in
2438.0mm
C
C
SECTION C-C
SCALE 1 : 8
163.858in
4162.0mm
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5215684
PL-6K RAMP ASSEMBLY
1:25
SCALE:

DIMENSIONS ARE IN MM
☺
5
83
7
4
6
2
1
18
19
15
20
14
13
21
11
12
9
10
16
17
NEXT ASSEMBLY
5260640
5260641
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5174053 PL-6KDT PARTS BAG 1 A
2 5215674 PL-6K 4-SHEAVE MOUNT ASSEMBLY 1 C
3 5215672 PL-6K 2-SHEAVE MOUNT ASSEMBLY, L.H. 1 C
4 5215671 PL-6K 2-SHEAVE MOUNT ASSEMBLY, R.H. 1 C
5 5216011 PL-6K CYLINDER SHEAVE MOUNT ASSEMBLY, SLIDE 2 A
6 5601606 PL-6K CYLINDER SUPPORT WELDMENT 2 A
7 5530271 M16 x 2.0 U-BOLT 2 A
8 5601605 PL-6K CYLINDER/CABLE MOUNT WELDMENT 2 A
9 5595637 CABLE ASSEMBLY Ø12 x 7542mm 2 A
10 5595685 CABLE ASSEMBLY Ø12 x 10544mm 2 A
11 5595686 CABLE ASSEMBLY Ø12 x 12260mm 2 A
12 5595687 CABLE ASSEMBLY Ø12 x 15324mm 2 A
13 5570146 HYDRAULIC HOSE ASSEMBLY Ø6.35 x 2360mm DS 1 A
14 5570102 HYDRAULIC HOSE ASSEMBLY Ø6.35 x 2787mm SB 1 A
15 5215711 PL-6KD CONTROL BOX ASSEMBLY 1 C
16 5716067 PL-6K POLYETHYLENE SLIDE BLOCK, WIDE 2 A
17 5716068 PL-6K POLYETHYLENE SLIDE BLOCK, NARROW 2 A
18 5530337 AB 3/4" x 6.3" 16 --
19 5520028 PL-6K CONTROL BOX 1 B
20 5590245 2 WAY D.B. VALVE 24V AC/DC COIL 2 --
21 5900056 PL-6K INSTALLATION MANUAL 1 --
WHERE USED
PL-6KDT
PL-6KDTX-21
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5250261
10/27/2020 CA 01218
B UPDATED BOM REVISION 10/19/2021 OR 01357
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5250309
PL-6KDT PARTS BOX
10/27/2020
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5535008 NUT M16 x 2 NL 48 --
2 5535012 NUT M12x1.75 NL 48 --
3 5545029 WASHER M16 SL 40 --
4 5545201 WASHER, M12 SPRING LOCK 44 --
5 5545025 WASHER M16 x 30mm FLAT 48 --
6 5545347 WASHER, M12 FLAT WASHER 8 --
7 5535131 HHB M16 x 2.0 x 50 32 --
8 5530116 HHB M12 x 1.75 x 40 44 --
9 5530352 FHSS M16 x 2.0 x 45 CL 8.8 4 --
10 5530272 HHB M16 x 2.0 x 55 8 --
11 5530029 HHB M12 x 1.75 x 25 4 --
12 5530791 PHPS M6 x 1.0 x 16mm 4 --
13 5545027 WASHER M12 x Ø37 x 3mm 36 --
14 5530318 PHPS M6 x 1 x 25mm 4 --
15 5535112 NUT M6 x 1.0 4 --
16 5550142 FTG NPL -06 ORB x -06 F NPT 4 --
17 5550100 FTG NPL -04 JIC x -06 NPT 3 --
18 5550103 FTG ELB -04 JIC -06 ORB 1 --
19 5550136 FTG TEE -06 NPT x -06 F NPT x -06 F NPT 1 --
20 5550128 FTG NPL -06 NPT x -06 NPT 1 --
21 5505026 1/2" PIPE STRAP Ø20.6mm 2 --
22 5535357 NUT M6 x 1.0 NL 2 --
23 5530756 HHB M6 x 1 x 25 2 --
24 5755054 PIPE, 3/8-18 NPT 2 A
25 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 --
26 5530070 SHCS M10 x 1.5 x 45mm 8 --
27 5535998 NUT M10 x 1.5 8 --
NEXT ASSEMBLY
5250309
WHERE USED
PL-6KDT
PL-6KDTX-21
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5174014
10/27/2020 CA 01218
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5174053
PL-6KDT PARTS BAG
10/27/2020
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 11/09/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

A
C
B
D
10
12
16
23
22
21
19
24
20
17
25
18
26
27
DETAIL A
SCALE 1 : 10
13
7
9
5
1
3
DETAIL C
SCALE 1 : 3
11
DETAIL B
SCALE 1 : 12
2
6
8
4
DETAIL D
SCALE 1 : 8
15
14
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5174053
PL-6KDT PARTS BAG
1:25
SCALE:

DIMENSIONS ARE IN MM
☺
4
6
5
3
1
7
2
8
NEXT ASSEMBLY
5250309
5250332
5250333
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 01/30/2015 TM 00681
B UPDATED BOM REVISION 07/31/2017 TS 00857
C UPDATED BOM REVISION AND NEXT ASSEMBLY 04/23/2019 TM 01079
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600938 PL-6K 2-SHEAVE MOUNT WELDMENT, R.H. 1 B
2 5215673 PL-6K SHEAVE ASSEMBLY 2 B
3 5746691 PL-6K SHEAVE PIN 1 A
4 5736865 PL-6K SHEAVE PIN BOLT PLATE 1 A
5 5545347 WASHER, M12 FLAT WASHER 2 --
6 5530096 HHB M12 x 1.75 x 14 2 --
7 5755148 PL-6K SMALL SHEAVE SPACER 1 A
8 5755147 PL-6K LARGE SHEAVE SPACER 2 A
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215671
PL-6K 2-SHEAVE
MOUNT ASSEMBLY, R.H.
01/30/2015
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
CA 05/17/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
4
6
5
3
1
7
2
8
NEXT ASSEMBLY
5250309
5250332
5250333
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 01/29/2015 TM 00681
B UPDATED BOM REVISION 07/31/2017 TS 00857
C UPDATED BOM REVISION AND NEXT ASSEMBLY 04/23/2019 TM 01079
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600939 PL-6K 2-SHEAVE MOUNT WELDMENT, L.H. 1 B
2 5215673 PL-6K SHEAVE ASSEMBLY 2 B
3 5746691 PL-6K SHEAVE PIN 1 A
4 5736865 PL-6K SHEAVE PIN BOLT PLATE 1 A
5 5545347 WASHER, M12 FLAT WASHER 2 --
6 5530096 HHB M12 x 1.75 x 14 2 --
7 5755148 PL-6K SMALL SHEAVE SPACER 1 A
8 5755147 PL-6K LARGE SHEAVE SPACER 2 A
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215672
PL-6K 2-SHEAVE
MOUNT ASSEMBLY, L.H.
01/29/2015
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
CA 05/17/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
5
6 8
1
2
3
4
7
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 01/29/2015 TM 00681
B UPDATED BOM REVISION 07/31/2017 TS 00857
C UPDATED BOM REVISION AND NEXT ASSEMBLY 05/06/2019 CA 01079
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600940 PL-6K 4-SHEAVE MOUNT WELDMENT 1 B
2 5215673 PL-6K SHEAVE ASSEMBLY 4 B
3 5755147 PL-6K LARGE SHEAVE SPACER 2 A
4 5755148 PL-6K SMALL SHEAVE SPACER 4 A
5 5746691 PL-6K SHEAVE PIN 2 A
6 5736865 PL-6K SHEAVE PIN BOLT PLATE 2 A
7 5545347 WASHER, M12 FLAT WASHER 4 -
8 5530096 HHB M12 x 1.75 x 14 4 -
NEXT ASSEMBLY
5250309
5250333
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KT
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215674
PL-6K 4-SHEAVE
MOUNT ASSEMBLY
01/29/2015
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
CA 05/17/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
A
2
4
1
3
8
5
12
11
DETAIL A
SCALE 1 : 5
7
10
6
9
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5215684
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E UPDATED BOM REVISIONS 05/18/2018 TM 00948
F REPLACED 5601129 WITH 5601277 08/14/2018 TM 00985
G UPDATED BOM REVISION 09/05/2018 TM 00994
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601277 PL-6K RAMP SIDE RAIL WELDMENT, L.H. 1 A
2 5215680 PL-6K RAMP SHEAVE MOUNT ASSEMBLY, L.H. 1 B
3 5215679 PL-6K RAMP SHEAVE MOUNT ASSEMBLY, R.H. 1 B
4 5600948 PL-6K CABLE ANCHOR WELDMENT 2 B
5 5601253 PL-6K CABLE ANCHOR SOCKET 2 B
6 5545200 WASHER M10 x Ø18 SL 20 --
7 5545341 WASHER M10 x Ø20 FLAT 20 --
8 5530021 HHB, M10 x 1.5 x 30 12 --
9 5530760 HHB M10 x 1.5 x 38 8 --
10 5535013 NUT M10 x 1.5 NL 20 --
11 5545345 WASHER M22 x 50mm FLAT 2 --
12 5535011 NUT M22 x 2.5 NL 2 --
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215677
PL-6K RAMP SIDE RAIL
ASSEMBLY, L.H.
02/04/2015
DO NOT SCALE DRAWING
1:16
SCALE:
THIRD ANGLE PROJECTION
CA 09/07/2018
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
A
2
1
3
8
5
11
12
4
DETAIL A
SCALE 1 : 4
6
7
10
9
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5215684
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E UPDATED BOM REVISIONS 05/18/2018 TM 00948
F REPLACED 5601130 WITH 5601276 08/14/2018 TM 00985
G UPDATED BOM REVISION 09/05/2018 TM 00994
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601276 PL-6K RAMP SIDE RAIL WELDMENT, R.H. 1 A
2 5215680 PL-6K RAMP SHEAVE MOUNT ASSEMBLY, L.H. 1 B
3 5215679 PL-6K RAMP SHEAVE MOUNT ASSEMBLY, R.H. 1 B
4 5600948 PL-6K CABLE ANCHOR WELDMENT 2 B
5 5601253 PL-6K CABLE ANCHOR SOCKET 2 B
6 5545200 WASHER M10 x Ø18 SL 20 --
7 5545341 WASHER M10 x Ø20 FLAT 20 --
8 5530021 HHB, M10 x 1.5 x 30 12 --
9 5530760 HHB M10 x 1.5 x 38 8 --
10 5535013 NUT M10 x 1.5 NL 20 --
11 5535011 NUT M22 x 2.5 NL 2 --
12 5545345 WASHER M22 x 50mm FLAT 2 --
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215678
PL-6K RAMP SIDE RAIL
ASSEMBLY, R.H.
02/04/2015
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
CA 09/07/2018
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
3
2
4
5
1
NEXT ASSEMBLY
5215677
5215678
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 02/04/2015 TM 00681
B UPDATED BOM REVISION 05/18/2018 TM 00948
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600949
PL-6K SERIES RAMP SHEAVE MOUNT
WELDMENT R.H.
1 B
2 5575020 PL-6K SERIES RAMP SHEAVE 1 A
3 5746684 PL-6K SERIES RAMP SHEAVE PIN 1 A
4 5755149 PL-6K SERIES RAMP SHEAVE SPACER 2 A
5 5540022 R RING OD Ø20 TRUARC N5100-78 2 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215679
PL-6K SERIES RAMP SHEAVE
MOUNT ASSEMBLY R.H.
02/04/2015
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 05/21/2018
ASSEMBLE ITEMS AS SHOWN 1.

DIMENSIONS ARE IN MM
☺
3
2
4
5
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5215677
5215678
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 02/04/2015 TM 00681
B UPDATED BOM REVISION 05/18/2018 TM 00948
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600950 PL-6K RAMP SHEAVE MOUNT WELDMENT, L.H. 1 B
2 5575020 PL-6K RAMP SHEAVE 1 A
3 5746684 PL-6K RAMP SHEAVE PIN 1 A
4 5755149 PL-6K RAMP SHEAVE SPACER 2 A
5 5540022 R RING OD Ø20 TRUARC N5100-78 2 -
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215680
PL-6K RAMP SHEAVE
MOUNT ASSEMBLY, L.H.
02/04/2015
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 05/30/2018
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
A
B
1
DETAIL A
SCALE 1 : 10
10
14
15
12
11
9
3
2
DETAIL B
SCALE 1 : 10
16
4
13
8
7
6
5
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E REPLACED 5545021 WITH 5545341 03/27/2019 CA 01067
F
UPDATED BOM REVISION AND NEXT
ASSEMBLIES
10/23/2020 CA 01218
G UPDATED BOM REVISION 08/11/2021 TM 01324
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600956 PL-6K CLOSEOUT CROSSBEAM WELDMENT 1 E
2 5746688 PL-6K CROSSBEAM CLOSEOUT SHEAVE PIN 2 B
3 5736865 PL-6K SHEAVE PIN BOLT PLATE 2 A
4 5215694 PL-6K SINGLE SHEAVE ASSEMBLY 2 A
5 5545341 WASHER M10 x Ø20 FLAT 4 --
6 5545202 WASHER M8 x Ø15 SL 4 --
7 5530010 HHB M8 x 1.25 x 25 4 --
8 5535001 NUT M8 x 1.25 NL 4 --
9 5545201 WASHER, M12 SPRING LOCK 4 --
10 5530029 HHB M12 x 1.75 x 25 4 --
11 5535012 NUT M12 x 1.75 NL 4 --
12 5746687 PL-6K CROSSBEAM SHEAVE WASHER 2 A
13 5746686 PL-6K CROSSBEAM SHEAVE WASHER, LARGE 2 A
14 5755152 PL-6K CROSSBEAM SHEAVE SPACER 2 A
15 5701186 PL-6K CROSSBEAM CABLE RETAINER 1 A
16 5701187 PL-6K CROSSBEAM CABLE RETAINER, SMALL 1 A
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
NEXT ASSEMBLY
5245118
5245119
5245127
5245141
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215683
PL-6K CLOSEOUT
CROSSBEAM ASSEMBLY
02/27/2015
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 08/17/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
52
4
3
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 01/20/2017 TM 00802
B
WAS SQUARE HOLE NOW ROUND HOLES,
UPDATED BOM REVISION
05/18/2018 TM 00948
C UPDATED WIRING, pg 3 10/19/2021 OR 01357
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5520028 PL-6K CONTROL BOX 1 B
2 5520404 PUSH BUTTON 22mm METAL, BLACK 1 N.O. 2 -
3 5520029
CAM CHANGEOVER SWITCH 8 TERMINAL, 660V,
12A
1 -
4 5520401 PUSH BUTTON, 22mm, EMERGENCY 1 -
5 5520403 SELECTOR SWITCH KEY OPERATED 2 POSITION 1 -
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
NEXT ASSEMBLY
5250309
5250332
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215711
PL-6KD CONTROL
BOX ASSEMBLY
01/20/2017
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
COIL EXCESS WIRE INSIDE BOX BEFORE SHIPPING 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
ASSEMBLE ITEMS AS SHOWN 4.

DIMENSIONS ARE IN MM
☺
6
15
3
5
18
13 14
4
17
1
7
16
9
11
8
10
2
12
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5260640
5260641
5260642
5260643
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600967 PL-6K SAFETY BAR BRACKET WELDMENT 1 A
2 5600966 PL-6K SAFETY BAR REAR BRACKET WELDMENT 1 A
3 5601602 PL-6K MULTI SAFETY LATCH BAR WELDMENT 1 A
4 5601603 PL-6K MULTI SAFETY LATCH TRIP PLATE WELDMENT 1 A
5 5736871 PL-6K SAFETY LATCH 1 A
6 5746367 PL-6K SAFETY LATCH BAR PIN 1 A
7 5746171 PL-6K SAFETY BRACKET PIN 2 A
8 5545201 WASHER, M12 SPRING LOCK 9 --
9 5545347 WASHER, M12 FLAT WASHER 9 --
10 5530323 HHB M12 x 1.75 x 60 CL 10.9 3 --
11 5535012 NUT M12x1.75 NL 9 --
12 5530116 HHB M12 x 1.75 x 40 6 --
13 5545341 WASHER M10 x Ø20 FLAT 1 --
14 5530267 HHB, M10 x 1.5 x 20 1 --
15 5505020 HAIR PIN #238, 0.125" x 2 7/8"L ZPL 2 --
16 5505006 COTTER PIN Ø3.2 x 20mm 2 --
17 5530273 FHS M12 x 1.75 x 40 2 --
18 5545025 WASHER M16 x 30mm FLAT 1 --
WHERE USED
PL-6KDT
PL-6KDTX-21
PL-6KDW
PL-6KT
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5215687
10/19/2020 CA 01218
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5216010
PL-6K MULTI SAFETY
LATCH BAR ASSEMBLY
10/19/2020
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
OR 11/10/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
5736871 MUST SWING FREELY 2.
ASSEMBLE ITEMS AS SHOWN 3.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 4.