BenQ LU9235 User manual

LU9235 / LX9215
Digital Projector
Installation Guide

English
2
Table of Contents
Notice..................................................................................................... 3
Laser notice .................................................................................................................... 3
Cooling notice ................................................................................................................ 4
When edge blending...................................................................................................... 4
Product information ............................................................................. 5
Packing content.............................................................................................................. 5
Specication ................................................................................................................... 5
Terminals ........................................................................................................................ 6
Installation ............................................................................................. 7
Lens ................................................................................................................................. 7
Projection table.............................................................................................................. 7
Lens shift range .............................................................................................................. 9
Projector dimension ............................................................................. 11
Lens dimension...................................................................................... 12
Remote control ..................................................................................... 13
RS232 command ................................................................................... 14
RS232 pin assignment.................................................................................................... 14
2016/ 4/ 18

English
3
Notice
Laser notice
This symbol indicates that there is a potential hazard of eye exposure to
laser radiation unless the instructions are closely followed.
CLASS 3R LASER PRODUCT
This Laser Product is designated as Class 3R during all procedures of operation.
LASER LIGHT - AVOID DIRECT EYE EXPOSURE.
Do not point laser or allow laser light to be directed or reected toward other
people or reective objects.
Direct or scattered light can be hazardous to eyes and skin.
There is a potential hazard of eye exposure to laser radiation if the included
instructions are not followed.
Caution – use of controls or adjustments or performance of procedures other than
those specied herein may result in hazardous radiation exposure.
Laser Parameters
Wavelength 450nm - 460nm (Blue)
Mode of operation Pulsed, due to frame rate
Pulse width 1.34ms
Pulse repetition rate 120Hz
Maximum laser energy 0.698mJ
Total internal power >100w
Apparent source size >10mm, at lens stop
Divergence >100 mili Radian

English
4
Cooling notice
Ventilation
Air inlet
Air inlet
Air outlet
Caution for installation
For proper ventilation of the projector, make sure to leave some space around the projector as
shown in the illustration below:
• Table
50cm
above
50cm
above 70cm above
• Ceiling • Stacking
Mar.2015/2015⸜03㚰
30cm above
Minimum 100mm
When edge blending
• To avoid the image shaking or some pixels in the display may be misaligned, do not use the
projector in the following location:
• In a building close to a construction site.
• In a room where an air conditioner unit is working and it vibrates.
• In a place where the temperature changes dramatically that may cause thermal contraction.
• Before making any adjustment, leave the projector lit for at least 15 minutes after its light source
is turned on. This allows the internal temperature of the projector to stabilize.

English
5
Product information
Packing content
User manual CD
Installation Guide Power cable VGA cable
Remote control Projector with anti-dust cap Batteries
Digital Projector
Installation Guide
Specication
LU9235 LX9215
Projection system DLP Single 0.67 WUXGA
DMD Chip
DLP Single 0.7 XGA
DMD Chip
Native resolution 1920*1200 pixels, 16:10 1024*768 pixels, 4:3
Brightness 6000 Lumens 6000 Lumens
Light source Laser diodes
Power consumption 650Watts (Normal mode)/ 530Watts (Eco mode)
Dimension 470 x 220.5 x 519.5 mm
Weight 24 kg (without lens)
Note:
• The brightness is supplied by standard lens, the value will depends on lenses.
• The brightness output will vary depending on each units and actual usage.

English
6
Terminals
• MONITOR OUT
Connection to other display equipment for concurrent playback display.
• PC
15-pin VGA port for connection to RGB, component HD source, or PC.
• HDBaseT
For connection to RJ45 Cat5/Cat6 cable to input uncompressed high-denition video (HD).
• DVI-D
Connection to DVI source.
• HDMI 1
Connection to HDMI source.
• HDMI 2/MHL
Connection to HDMI or MHL source.
• LAN
For connection to RJ45 Cat5/Cat6 Ethernet cable to control the projector through a network.
• USB 1.5A
Support 5V/1.5A output.
• 3D SYNC OUT
Connection to 3D IR sync signal transmitter.
• VIDEO
Connection to a video source.
• SERVICE
Maintenance exclusive port for authorized maintenance personnel only.
• RS-232
Standard 9-pin D-sub interface for connection to PC control system and projector maintenance.
• PC 2 (R/Pr, G/Y, B/Pb, H,V)
Connection to RGB or YPbPr/YCbCr output signal with BNC type input terminal.
• AUDIO IN (L/R)
Connection to an audio input source via an audio or audio L/R cable.
• AUDIO OUT (L/R)
Connection to a speaker or headset.
• AUDIO IN
Connection to an audio input source via an audio cable.
• WIRED REMOTE IN
Connection to remote control for wire remote control.
Caution:
Make sure the port is valid before inserting a wired remote controller. The remote controller may be damaged in
case of an invalid port, e.g. a wired remote controller is connected to trigger output.
• WIRED REMOTE OUT
Connection to another projector.
• 12V TRIGGER
3.5mm mini earphone jack, employs 200mA display relay to provide 12(+/-1.5)V output and short circuit
protection.

English
7
Installation
Lens
Model Lens Type Part Number Throw Ratio Lens Shift
LS2ST3 Wide x 5J.JDH37.002 XGA: 0.81
WUXGA: 0.778
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
LS2ST1 Wide zoom 5J.JDH37.011 XGA: 1.14-1.347
WUXGA: 1.1-1.3
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
LS2SD2 Standard 5J.JEN37.001
XGA: 1.6-2
WUXGA: 1.54-
1.93
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
LS2LT1 Semi long 5J.JDH37.032 XGA: 2-3
WUXGA: 1.93-2.9
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
LS2LT2 Long zoom 5J.JDH37.041 XGA: 3.11-5.18
WUXGA: 3-5
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
Projection table
Image Height
Image Width
Diagonal
Projection Distance
Projection Image
Image Hight
h
h
O
A
A
h
h
• LX9215
Lens Wide Zoom
(LS2ST1)
Standard
(LS2SD2)
Throw ratio 1.14~1.347 1.6~2
Diagonal Image Width Image Height Offset (A) ODistance Distance
Wide/Tele Wide/ Tele Wide Tele Wide Tele
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 64 1.63 48 1.22 0.0 0.000 24.0 0.610 73 1.85 86 2.19 102 2.60 128 3.25
100 2.54 80 2.03 60 1.52 0.0 0.000 30.0 0.762 91 2.32 108 2.74 128 3.25 160 4.06
120 3.05 96 2.44 72 1.83 0.0 0.000 36.0 0.914 109 2.78 129 3.28 154 3.90 192 4.88
150 3.81 120 3.05 90 2.29 0.0 0.000 45.0 1.143 137 3.47 162 4 .11 192 4.88 240 6.10
200 5.08 160 4.06 120 3.05 0.0 0.000 60.0 1.524 182 4.63 216 5.47 256 6.50 320 8.13
300 7.62 240 6.10 180 4.57 0.0 0.000 90.0 2.286 274 6.95 323 8.21 ----
400 10.16 320 8.13 240 6.10 0.0 0.000 120.0 3.048 - - - - - - - -
Lens Semi Long
(LS2LT1)
Long Zoom
(LS2LT2)
Wide Fix
(LS2ST3)
Throw ratio 2~3 3.11~5.18 0.81
Diagonal Image Width Image Height Offset (A) ODistance Distance Distance
Wide/Tele Wide/ Tele Wide Tele Wide Tele NA
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 64 1.63 48 1.22 0.0 0.000 24.0 0.610 128 3.25 192 4.88 199 5.06 332 8.42 52 1.32
100 2.54 80 2.03 60 1.52 0.0 0.000 30.0 0.762 160 4.06 240 6.10 249 6.32 414 10.53 65 1.65
120 3.05 96 2.44 72 1.83 0.0 0.000 36.0 0.914 192 4.88 288 7.32 299 7.58 497 12.63 78 1.98
150 3.81 120 3.05 90 2.29 0.0 0.000 45.0 1.143 240 6.10 360 9.14 373 9.48 622 15.79 97 2.47
200 5.08 160 4.06 120 3.05 0.0 0.000 60.0 1.524 320 8.13 480 12.19 498 12.64 829 21.05 130 3.29
300 7.62 240 6.10 180 4.57 0.0 0.000 90.0 2.286 480 12.19 720 18.29 746 18.96 1243 31.58 194 4.94
400 10.16 320 8.13 240 6.10 0.0 0.000 120.0 3.048 640 16.26 960 24.38 ------

English
8
• LU9235
Lens Wide Zoom
(LS2ST1)
Standard
(LS2SD2)
Throw ratio 1.1~1.3 1.54~1.93
Diagonal Image Width Image Height Offset (A) ODistance Distance
Wide/Tele Wide/ Tele Wide Wide Wide Wide
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 68 1.72 42 1.08 2.1 0.054 23.3 0.592 75 1.90 88 2.24 104 2.65 131 3.33
100 2.54 85 2.15 53 1.35 2.6 0.067 29.1 0.740 93 2.37 110 2.80 131 3.32 164 4.16
120 3.05 102 2.58 64 1.62 3.2 0.081 35.0 0.888 112 2.84 132 3.36 157 3.98 196 4.99
150 3.81 127 3.23 79 2.02 4.0 0.101 43.7 1.111 140 3.55 165 4.20 196 4.98 245 6.24
200 5.08 170 4.31 106 2.69 5.3 0.135 58.3 1.481 187 4.74 220 5.60 261 6.63 327 8.31
300 7.62 254 6.46 159 4.04 7.9 0.202 87.4 2.221 280 7.11 331 8.40 - - - -
400 10.16 339 8.62 212 5.38 10.6 0.269 116 .6 2.962 --------
Lens Semi Long
(LS2LT1)
Long Zoom
(LS2LT2)
Wide Fix
(LS2ST3)
Throw ratio 1.93~2.9 3~5 0.778
Diagonal Image Width Image Height Offset (A) ODistance Distance Distance
Wide/Tele Wide/ Tele Wide Wide Wide Wide NA
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 68 1.72 42 1.08 2.1 0.054 23.3 0.592 131 3.33 197 5.00 204 5.17 339 8.62 53 1.34
100 2.54 85 2.15 53 1.35 2.6 0.067 29.1 0.740 164 4.16 246 6.25 254 6.46 424 10.77 66 1.68
120 3.05 102 2.58 64 1.62 3.2 0.081 35.0 0.888 196 4.99 295 7. 50 305 7.75 509 12.92 79 2.01
150 3.81 127 3.23 79 2.02 4.0 0.101 43.7 1.111 245 6.24 369 9.37 382 9.69 636 16.15 99 2.51
200 5.08 170 4.31 106 2.69 5.3 0.135 58.3 1.481 327 8.31 492 12.49 509 12.92 848 21.54 132 3.35
300 7.62 254 6.46 159 4.04 7.9 0.202 87.4 2.221 491 12.47 738 18.74 763 19.39 1272 32.31 - -
400 10.16 339 8.62 212 5.38 10.6 0.269 116 .6 2.962 655 16.63 984 24.99 ------
Note:
• Ceiling installation must be done by a qualied professional. Contact your dealer for more information. It is not
recommended you install the projector yourself.
• Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector is dropped.
• Do not use the projector in an environment where extreme temperature occurs. The projector must be used
at temperatures between 41 degrees Fahrenheit (5 degrees Celsius) and 104 degrees Fahrenheit (40 degrees
Celsius).
• Screen damage will occur if the projector is exposed to moisture, dust or smoke.
• Do not cover the vents on the projector. Proper ventilation is required to dissipate heat. Damage to the
projector will occur if the vents are covered.

English
9
Lens shift range
Lens shift adjustable range
The adjustable range for lens shift is tabulated below and subject to the conditions listed.
Note:
The drawings below apply to the standard lens only.
• LX9215
Desk-Front Projection Normal projection position
Width of projected image
Height of projected image
Height of projected image
Vertical shift
Vertical shift
Vertical shift
Vertical shift
Shift to Left Shift to Right
Max 0.5V
Max 0.5V
1V
1V
1H 0.05H0.05H
Max 0.1V
Ceiling Mount-Front Projection
• LU9235
Desk-Front Projection Normal projection position
Width of projected image
Height of projected image
Height of projected image
Vertical shift
Vertical shift
Vertical shift
Vertical shift
Shift to Left Shift to Right
Max 0.55V
Max 0.55V
1V
1V
1H 0.05H0.05H
Max 0.15V
Ceiling Mount-Front Projection

English
10
Ceiling Mount Installation
H
C
0.05H
Screen Top
Screen Center
Shift Range
C = Distance from lens to screen
Desktop Installation
C
H
0.05H
Shift Range
Screen Center
Note:
Lens Shift feature is not available to LS2ST3 (Fix Lens). This lens should be used for "zero degree"/"no-offset"
applications. See below:
C
113.5 Screen Center
FOR USE WITH LS2ST3 (FIX LENS) ONLY