BENRO GD3WH User manual

=) BENRO’
Operating Instructions
|GEAR DRIVE 3WAY HEAD

Thank you for making BENRO your choice for
professional photographic equipment.
Your BENRO gear is manufactured
to provide years of dependable service.
In order to obtain optimum satisfaction and performance,
we suggest that you carefully read these instructions.
Rag Rie EET WIRE EET,
Biamislt
BEEEMNERRS.
ATE
MEE mAERBEINEE,
BAB WEF HERE TEAERIRA.

EB &Fr Name of Components
1.1/4" HEH 28.3% ZR jE
1/4" Camera Screw Pan Scale
2. HREWR 9. [=] fis $34 iE $A
Quick Release Plate Side Tilt knob,
Gear Driven
3. R%E HK
Quick Release Clamp 10.7k FX
Bubble Level
4RIE FFE
Quick Gear Disengage Wheel 11 {hate ai EiE4
Quick Release Plate
5.80 5{FM ie £1 Locking Knob
Front and Back Tilt knob,
Gear Driven
6. =BEE
Head Base
7IKFEES=HEA
Pan rotation knob, Gear Driven
www.benro.com ®

slip screw
Anti-
=
slip groove
Anti
www.benro.com ®

Operation Instruction
Quick Release Wheel (Figure 1)
As is shown a, b, crepresents the side tilt quick gear disengage wheel, pan adjustment quick gear disengage wheel and front &back
quick gear disengage wheel, which is suitable for fast wide range adjustment. Rotate the quick gear disengage wheel to release the
gear, do not release the wheel until you have positioned the head. This allows a rapid adjustment for large moves without being gear
driven.
Side Tilt Adjustment (Figure 2, 3)
Rotate the side tilt knob clockwise or counterclockwise to adjust the side imaging angle to aproper position, just release the knob and
your angle is secure.
Front &Back Tilt Adjustment (Figure 4)
Rotate the front and back tilt knob clockwise or counterclockwise to adjust the front and back tilt imaging angle to aproper position,
just release the knob and your angle is secure.
Pan Adjustment (Figure 5)
Rotate the pan knob clockwise or counterclockwise to adjust the head in 360 degrees clockwise or counterclockwise, just release the
knob and your angle is secure.
Mount the Head on the Tripod (Figure 6)
Mount the head to asuitable tripod or support. It will screw onto a3/8-16 mount. It is recommended to use safety lock down screws if
available on your support.
®Specifications and design are subject to change without notice.

Quick Release Plate
The quick Release Plate has adouble safety lock system. Once the plate is attached to the camera the camera can be attached and
removed from the head very safely and quickly. The Quick Release Plate is compatible with otherArca style clamps.
Quick Release Clamp Safety Lock System (Figure 7)
The Pull and twist QR plate locking knob and the safety screws integrated onto the QR plate ensure that your camera gear is never
accidentally removed.
Detaching Quick Release Plate
Loosen the Quick Release Plate lock knob, until it stops and then pull out the knob it will continue to turn and loosen the clamp. This will
LIMITED WARRANTY COVERAGE
Your Benro product has been carefully manufactured, has passed many quality assurance checks and has been thoroughly tested
before shipment. It is warranted in the country from which you purchased it based on the date of purchase to the original owner, against
defects in materials and workmanship. The warranty does not apply to damages caused by mishandling, dropping, or leaking batteries,
nor modification or servicing performed by others.
Please contact your local Benro dealer for further information and details about your warranty. To find the Benro distributor in your
country, please check the distributor information at Benro official website www.benro.com.
www.benro.com @

USER NOTICE
ho Do not exceed the maximum specified load capacity (see specifications on the package label or visit www.benro.com).
MAX
Always ensure that Leg and Head Locks are tightly engaged before mounting any gear on your Tripod.
Always clean and dry any Tripod after it has been exposed to wet, dusty, sandy or salty conditions. Your Tripod is not recommended
for use in salt water. If required, clean tripod using amild soap solution applied with asoft cloth, rinse with fresh water and dry with
soft towel. Remove any dust, dirt or sand from all Leg Locks, Leg Sections and all moving parts.
1a Do not use any Tripod below temperatures of -4°F or above +158°F(-20°C/+70°C).
Y)
yd Do not leave any Tripod in the sun for prolonged periods and avoid high temperature exposure.
’
fi ka Avoid leaving any Tripod unattended in areas where people could trip over the gear and get hurt.
Remove camera, lens, and all gear from any Tripod when transporting.
NO
AH For your safety, don't let your BENRO gear come in contact with any electrical power source.
Specifications and design are subject to change without notice.

{EH (Rib 300)
RERMER: (WHBIHAR)
ma, b. cAIR, KAIZAMMERS. AFAS. WEMEHRERNE, SAXBENAE, BRERIR
IRE iER Bl —EA EEBERY, KAABRMMERANEN, HBT UHITAEERE,
zoNWaHE#ET: (WB 2, 3/RR)
25 SSM BF $1 AES OU ALE, XBR RD FT LURE HARLOW EAR AEE, ETE AE ABE LE HERO (5) {6
HEB,
ZoNAGENKRT: (WEAR)
2B HSA SAE SE BTS IRAE, XBR LUA FANSERMR AEE, AH ESIEHESIEEE
JER HE ERD 7
ZESWKEEERET: (WEBS5PHAR)
BETA $tRESE KF RAE, IER ATH TK ESE SRIRM 360K HER, BRYTMTREBEMATE
HEHE, REBILEE KEL READT,
ZERRIMR LE: (WE 6FAR)
ZEMNRRNERERETHIT, BZERNKHRITE, BRE REWBELIAHSHTEZIHERS,
www.benro.com (9)

BARER
ZEMEMNBEARERTENREHE, TURERTHILURBR EE. HEHRERSHEMRERKS, HAE
RIEL FENNEL,
RERESYERG (WE 7Fx)
AREXPERFZEGHTELLRREEFAHLEAAARERSHRBIEMERT BE.
RF RER
FRETRE XERE ITHRERER, NHR EHASREFER ITH, MAH THRER, RZBPTH ERE
Ho
REWER BAIRPIEBELEEELZRERBIER,
TEED: AETEMEXREH ERE, IHESHRAZEANBEEN,
=A HAIREKF
RERE=A"F ER LFEFKEN, FEEERAN=I4ENKE,
HEREREMN TERR EEE NARRR, BRSTEM.

EESM:
BERLERE, ERERIAEHEARE ($ASHESES SB FAETEEN. )
MAX
AEREFERE, HTBERMUFEN, FREEZE, BSLRAFRNEI HERZL TFRERS,
i977 BoE TOENATFE LOSER TEAKER,
2wR, BY, REFRBHEATE, "EEA THBBRRT, MAURBERIVNBI ERTS, AE
REKER, HEBER, BEAEFER. TEFEBKIEARAEL™
4
ME EOKHERERREEXET, BEKHASFAMEERAT, ANKEAERRENN,
fihs) zosmmeRiEan, BOBA, BRABKE, BEREMIE. ERRAOMTERN, EERE
{HERE (1H) SREB.
NO
ATAs, EREEEN, EIEEERERE, N5BBUFEM,
REEE
TCHREANBEESFRELTBEENT, EH~FRELN, FFEDEERUXATEGEH ©, AEMASEIZ HF ENEE,
AILESEFMINXEERECNEETER, FEAARERERNTRBAAEREERAR, Gl: HiRgE, m=2E%, S&H
iw RE HR R,
REFREVTUBKREREMNESHEE, BIN ERT IFHE RTE Rwww.benro.com®& if],
www.benro.com a

{EH Jik CER 30)
RERBIESR: (WE 1H)
mnfda, b, cHiR, KAREEMAEER. AFEH. WEMFEHRERNER, BEXBEORY, HREBTR
NERS SHAE RE —EA EEERS, ENBRHETRANEN, KNBBTLUETRIRERE.,
ESHRORNAS: (WE 2. 3HAR)
S25 1NEES St AE BR BEAR AR, SRR AT FT LUGE RM ROB AR ARE, BEE AE fA BS LE AE fe
PHHESARD AT
ESOMRINHRE: (WEBAIRTR)
25 1NERS St AES ATR IRAE SR, SEAR TT LU RRMMBT ERI RR fA E, AES EAE EILEEE
HAASE AT
ESHKFRBRE: (WES5SHATR)
BREST IARF STREET £RARER, MAREE RTA TRS SER SI360E EH, MYT TRETENBDE
WEE, RESLEEATE IEA,
ESRRIKRL: (WE 6FIT)
EENREBER SRE TEST, BEFENKBRER, BERNER GIER ESE STARE,
12 E*REHEFETLHRRAEATHER, BRBTEMN.

iE Fi IR BR
REARGEARERETERBHE, TURER TABLE RY RE. WEORERELBRERRS, HE
RE RERRARE,
RERZZHR/RGE (WB 7AR)
ARERHERGRAHALERBEBTH LEA RR ESERBEM ERM BE,
HT REAR
HR EHER RE RHEE BARS KBE, MHA ERGASRHER, DTH TREN, RZ DTHERE
Ho
REAR EMBER IL BRGET EERE RIBERA,
EEFH: TEBEH#RRKMAREDS, SHSRNEENHREE.
EL AEEKER
RERE=BHELBREATER, FECERRZBEEORE,
www.benro.com a3

EEER:
ERALERN, FTERARENRARE (HASUFASLEARFAEAREM. )
AFERLERN, BTEBESMUEAR, EREARIH, SEL RRERNREMHERERTREMRE,
i577 wrEEToRSETE L0OENEE TERRES,
23 H#HR, BY, ABEEREPERAE, —TEARHHBHRTRT, NARBERINBIERESR, FE
REKERE, FEES, FREER. THEBES ERALXER,
4
We FOERMBESHEEABT, BRERMSESNEEEET, HNEDAERRANG.
fila) srssFEnsERE, FORA, BENKEL, SHEMET, ERRNOBIERE, WHERE,
RIESE (8%) F-EEEBEH.
NO
ABTAS%S, GRAESE, B75 isEBEE, SHEBXLSES.
REE
BHREANERERZCBBEZNT, STARFEERDY, FAVEREIRATEGEHEN., AIEMHSE IEF EHBRE,
AUEZEHBENESSBEEHEETR. FAARREMERMNERERFAERECERA, Him: HRBE, BEEE, IEE
ith im ERE,
BERETURREHAEMOCHRD, BIMEFTFARESTEREwWwWwW.benro.com&EF,
HREM EENH ERE ATERN, BERS TEL.

2) BENRO’
Lets go!
www.benro.com 5)

BENRO IMAGE TECHNOLOGY INDUSTRIAL CO.,LTD.
The Third Industrial Area Tanzhou Town Zhongshan City,
Guangdong,China
Tel: [phone] Fax: [phone]
Http: www.benro.com www.benro.cn
IFREEZERRTUSRAE
Moth ©ARE RLTHIEMES SE TR KIEH595
EBi% :0760-86738666 fH :0760-86211711
Http :www.benro.com www.benro.cn