Madison Park Elmwood Dining Chair User manual

Assembly Procedures:
Step 1. Assemble the chair on a flat, soft surface such as a carpet or cloth to prevent scratching
the finish.
Insert the front rail (P4) to the front legs (P3), then insert the legs (P3) to the bottom of seat
cushion (P2) as shown below image 1.
H1
H4
H2
H5
H6
H3
H8
H7
P3
P2
P4
Image 1 H2
H4
H5
H6
Pre-assembly:
Take out all parts and hardware from box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
R
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.

Step 2. 1) With one person to help, insert the left rail (P5) and right rail (P6) to the front legs (P3), then insert left
rail (P5) and right rail (P6) to the legs of chair back (P1) as shown below image 2.
2) Assemble the seat cushion(P2) to the chair back (P1) as shown below image 3.
Step 3. Turn the assembled chair to an upright position. Make sure the chair is leveled and aligned
properly,assembly is complete. Failure to follow these instructions may cause the bolts to misalign during
assembly.
P5
P6
P1
H1
H4
H5
H3
H4
H5 H7 Image 2
Image 3
P2
P2
P1
P1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.