Berlin Gardens PLTS4800 Firmware update

FM - 38
Assembly Directions for Swings
#PLTS4800, #PLTS6000, #PCTS4800, #PZTS4800
HARdWARE PACKAGE
2 " x 3½" Carriage Bolts
2 " x 4" Carriage Bolts
2 ¼" x 3½" Carriage Bolts
3 ¼" x 3" Carriage Bolts
4 " Flange Nuts
8" Washers
4 " Lock Nuts
5 ¼" Flange Nuts
2 " x 3" Eye Screws
4 " Acorn Nuts
PACKAGE CONTENTs
1 Back
1 Seat
2 Arms
1 Hardware Package
TOOls NEEdEd:
Hammer
" Wrench
½" Wrench
Firmlytapboltsintopre-drilled
holesbeforetightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
Casual-Back
Comfo-Back
Cozi-Back
Top Board
Back Slat
Arm Slat
Arm
Seat Support
Seat Slat
Arm Support
STEP #1 - With the Seat and Back lying face up, install
the ¼" x 3" Carriage Bolts through the pre-
drilled holes.
Please note: Loosely tighten the Flange Nuts on
the Carriage Bolts.
¼" x 3" Carriage Bolts
www.Poly-Lumber-Furniture.com
1-877-904-1234

FM - 39
STEP #2 - Attach the Arm Assembly to the Seat and Back
using a " x 4" Carriage Bolt at the seat and a
" x 3½" Carriage Bolt at the Arm.
STEP #3 - Install the Eye Screw into the pre-drilled hole
(see Diagram C). Attach the chain to the
Carriage Bolts using Washers and Lock Nuts
(see Diagrams A and B).
STEP #4 - Repeat Steps 3 and 4. Firmly tighten the Flange
Nuts from Step 1.
Your Swing is complete!
¼" x 3½" Carriage Bolts
⁄" x 4" Carriage Bolts
⁄" x 4" Carriage Bolts
Diagram B
Diagram C
Diagram A
Diagram A
⁄" x 3½" Carriage Bolts
⁄" x 3½" Carriage Bolts
Diagram C
Diagram B
Diagram A Diagram B Diagram C
¼" x 3½"
Carriage Bolt
(2) 5⁄16" Washers
5⁄16"
Lock Nut
Eye Screw
5⁄16"
Lock Nut
(2) 5⁄16" Washers
5⁄16" x 3½"
Carriage Bolt
to attach arm
to back and
secure chain
5⁄16"
Flange
Nut
5⁄16" x 4"
Carriage
Bolt
5⁄16"
Flange
Nut
www.Poly-Lumber-Furniture.com
1-877-904-1234