001163 GFSI rev 2a us
Santee, California 92071 | World Wide Patents Pending | Email: customercare@
berninifountains.com
| On the web: www.
berninifountains.com
Facebook & Pinterest: Bernini Fountain Company | Instagram: @berninifountains Twitter: @yrdllc
© Yeiser Research & Development, LLC; 2019. All rights reserved.
Made in China | Designed in the USA
TROUBLESHOOTING: CARE AND MAINTENANCE:
Call
us
for
assistance
at
+1
(619)
449-2392
or
you
can
email
us
at
customercar
[email protected] or
mail
us
at:
9545
Pathway
Street,
Santee,
CA
92071,
Our Customer Care Department is available: Monday - Friday 8:30am to 4:00pm PST /11:30am - 7:00pm EST
LIMITED ONE YEAR WARRANTY
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. This product has a one year limited warranty on all materials and workmanship. Bernini® warrants the original purchaser of this
product that the product will be free from manufacturing defects in workmanship and material for a period of one (1) year from the date of original purchase. If within one (1) year this product fails due to defect in material or workmanship,
Bernini® will repair, replace or supply any defective part at their option. The purchaser must contact Bernini® and provide a description of the defective part, including digital pictures if requested, with this original purchase documentation as
validation of warranty coverage. This warranty does not cover or apply to: (a) damage to the product due to misuse, mishandling, and abuse, (b) products not used in accordance with instructions, (c) product not assembled or installed
according to instructions, and (d) normal wear and tear.
Please read first before returning:
Please
call
us
for
assistance
at
1-619-449-2392
or
email
us
at
customercar
[email protected].
Our
Customer
Care
Department
is
available:
Monday
-
Friday
8:30am
to
4:00pm
PST
,
11:30am
to
7:00pm
EST
.
If
you
have
any
questions
regarding assembly, parts, or operation, please visit our website at www.berninifountains.com. You will find instructional videos on how to assemble and operate your fountain, and keeps you up to date on our newest products. You can also
email us with any questions you have. This product comes with a one year limited warranty against materials and workmanship.
IMPORTANT BATTERY SAFETY INSTRUCTIONS:
PROPOSITION 65 WARNING: This product can expose you to chemicals including lead and lead compounds which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www. P65Warnings.ca.gov.
WARNING: When using electric devices, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury.
Step 1 Step 2
Step 3 Step 4
Greta Flower Spitter
OWNERS MANUAL
Troubleshooting Guide
PRIMING THE WATER PUMP
If you find the Water Pump is running, but water is not flowing from your Greta Flower Spitter,
you can try priming the Water Pump. First unplug the Corded Water Pump from the power
source. Grab the pump and hold it while still submerged and lightly shake. This will dislodge
any air bubbles that may be caught in your Water Pump. Plug the Corded Water Pump back
into the power source. Water should be flowing from your Greta Flower Spitter. If water is not
flowing, unplug the Corded Water Pump and repeat the steps above.
CLEANING YOUR FOUNTAIN
In order to keep your Greta Flower Spitter in tip-top
shape and free of algae, you should clean your Spitter
every two months. To clean your Spitter, drain of all water
and disassemble. Use a mild soap and soft cloth to clean
the parts. DO NOT SCRUB YOUR FLOWER SPITTER, AS
THIS COULD CAUSE DAMAGE TO THE FINISH.
COLD STORAGE
Drain the water from Greta Flower Spitter prior to the
first freeze of the season. Clean and dry the Spitter of
all water and bring it indoors. (Now is a great time to
clean the pump to remove any debris that may have
accumulated throughout the year.) Store in a warm
dry area.
CLEANING THE WATER PUMP’S PARTS
The impeller inside of the Water Pump is what pushes
water up through your Greta Flower Spitter. After long
periods of usage, this part will need to be cleaned to
make sure your Greta Flower Spitter runs optimally.
Step 1: Remove the pump cover panel off the Water
Pump by grabbing the sides of the cover and pulling
it up off the unit.
Step 2: Remove the impeller chamber cover. This is
tightly fitted but will come off.
Step 3: Remove the impeller from its chamber.
Step 4: Rinse the impeller until all debris has been
removed.
Step 5: Reassemble your pump.
