Bernini Palermo User manual

Palermo is the capital of the Italian island of Sicily that is know for its grand Opera performances - this little piece of Italian elegance will add festivity to any space.
|1
Figure 7
CONTENTS:
ASSEMBLY:
OPERATION:
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING TO ASSEMBLE YOUR NEW FOUNTAIN
Water Pump
Water Pump/LED
Light Combo
Fountain Base
Fountain Base
Please note, images of parts are not to scale with one another.
Decorative Rocks
Decorative Rocks
Fountain Topper
Diagram 1:
Fountain Topper
Power Cord
LED Lights
Water
Reservoir
Water
Tube
Pre Assembly Preparation:
1. Note: The Palermo Fountain is designed
for easy assembly but please use caution
when assembling fountain.
2. Prior to assembly take time to nd a
suitable location for your fountain and make
sure to place the Base of your Fountain on a
at, rm surface.
3. Use Diagram 1 for reference on part
names, connecting and how all the individual
parts t together.
4. Use all electrical safety precautions.
Please make sure that the electrical plug is
dry and clean before inserting into the outlet.
Always unplug before lling with water or
servicing your fountain.
5. Due to evaporation check and ll water
level periodically.
1. Prior to assembly take time to nd a suitable location for your fountain and make sure to place
the Base of your Fountain on a at, rm surface (Figure 1).
2. Set the Fountain Topper on the edge of the Fountain Base (Figure 2).
3. Insert the Water pump/LED Light combo into the Fountain Base. Insert the LED Light into
the circular hole in the Fountain Topper base (Figure 3 & 4 Black Arrows). Insert the outlet of the
Water Pump into the Water Tube (Figure 3 & 4 White Arrows).
4. Set the Fountain Topper onto the Fountain Base (Figure 5). Route the Electrical Power Cord
through the notch in the back of the Fountain Topper (Figure 6 Black Arrow).
5. Place the Decorative Rocks around the base of the Fountain Topper (Figure 7).
6. Fill the fountain reservoir with water (Figure 7). Make sure water pump is completely sub-
merged in water. Due to evaporation check and ll water level periodically.
7. Plug in your fountain and enjoy (Figure 8).
8. If needed, you can adjust the water ow by locating the Water Flow Adjustment Lever on the
Water Pump side cover. Move the lever toward the + (plus) sign to increase water ow or – (mi-
nus) sign to decrease water ow (Figure 9 Arrow).
To turn on your fountain plug in your fountain: Check for water owing out of the Fountain
Topper and LED light is on. If water is not owing refer Troubleshooting Section/Priming The
Water Pump of this manual.
Water Level: Due to evaporation, clean water must be added periodically. Be sure to maintain
the water level in the fountain base so that the water pump is completely submerged in water
at all times. If not, damage may occur and the limited warranty will be void.
Figure 1 Figure 3Figure 2 Figure 4 Figure 5
Figure 6
Figure 8 Figure 9
++--
Palermo Fountain Owners Manual
Palermo is the capital of the Italian island of Sicily that is know for its grand Opera performances - this little piece of Italian elegance will add festivity to any space.

Palermo is the capital of the Italian island of Sicily that is know for its grand Opera performances - this little piece of Italian elegance will add festivity to any space.
2|
Santee, California 92071 | World Wide Patents Pending | Email: [email protected] | On the web: www.berninifountains.com
Facebook & Pinterest: Bernini Fountain Company | Instagram: @berninifountains Twitter: @yrdllc
© Yeiser Research & Development, LLC; 2020. All rights reserved.
Made in China | Designed in the USA
001207 BPFI rev 1f US
Please read rst before returning:
Please call us for assistance at [phone] or email us at customercar[email protected]. Our Customer Care Department is available:
Monday - Friday 8:30am to 4:00pm PST, 11:30am to 7:00pm EST. If you have any questions regarding assembly, parts or operation, please visit our
website at www.berninifountains.com. On our website, you will nd instructional videos on how to assemble and operate your fountain and you can
keep up to date on our newest products. This product comes with a one year limited warranty against materials and workmanship.
Call us for assistance at [phone] or you can email us at customercar[email protected] or mail us at: 9545 Pathway Street, Santee, CA
92071, Our Customer Care Department is available: Monday - Friday 8:30am to 4:00pm PST /11:30am - 7:00pm EST
LIMITED ONE YEAR WARRANTY
This warranty gives you specic legal rights and you may also have other rights which vary from state to state. This product has a one year limited
warranty on all materials and workmanship. Bernini® warrants the original purchaser of this product that the product will be free from manufacturing
defects in workmanship and material for a period of one (1) year from the date of original purchase. If within one (1) year this product fails due to defect
in material or workmanship, Bernini® will repair, replace or supply any defective part(s) at their discretion. The purchaser must contact Bernini® and
provide a description of the defective part, including digital pictures if requested, with this original purchase documentation as validation of warranty
coverage. This warranty does not cover or apply to: (a) damage to the product due to misuse, mishandling, and abuse, (b) products not used in accor-
dance with instructions, (c) product not assembled or installed according to instructions, and (d) normal wear and tear.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
a) Close supervision is necessary when any appliance is used by or near children. b) To avoid injury, do not contact moving parts or hot parts such as heaters, reectors,
lamp bulbs, and the like. c) Always unplug an appliance from an outlet when not in use, before putting on or taking o parts, and before cleaning. Never yank cord to pull
plug from outlet. Grasp the plug and pull to disconnect. d) Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the
appliance manufacturer may cause an unsafe condition. e) Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing. f)
Read and observe all the important notices on the appliance. g) If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes
or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled. h) This appliance has no user service-
able parts.
Cleaning your Fountain
In order to keep your Fountain in tip-top shape and free of algae, we recommend
cleaning your Fountain every two months. To clean your Fountain, unplug, drain of all
water and disassemble. Use a mild soap and soft cloth to clean the parts.
DO NOT SCRUB YOUR FOUNTAIN AS THIS COULD CAUSE DAMAGE TO THE
FINISH.
Cold Storage
Drain the water from Fountain prior to the rst freeze of the season. Clean and dry the
Fountain of all water and bring it indoors. (Now is a great time to clean the pump to
remove any debris that may have accumulated throughout the year). Store in a warm
dry area.
Cleaning The Water Pump
The impeller inside of the Water Pump is what pushes water up through your Fountain.
After long periods of usage, this part will need to be cleaned to make sure your Foun-
tain runs optimally.
Step 1: Remove the pump cover panel o the Water Pump by grabbing the sides of the
cover and pulling it up o the unit. Cover is tight but will come o.
Step 2: Remove the impeller chamber cover. Cover is also tightly tted but will come
o.
Step 3: Remove the impeller from its chamber.
Step 4: Rinse the impeller until all debris has been removed.
Step 5: Reassemble your pump.
Priming the Water Pump
If you nd the Water Pump is running but
water is not owing from your Fountain, you
can try priming the Water Pump. First unplug
the Corded Water Pump from the power
source. Grab the pump and hold it while
still submerged and lightly shake. This will
dislodge any air bubbles that may be caught
in your Water Pump. Plug the Corded Water
Pump back into the power source. Water
should be owing from your Fountain. If wa-
ter is not owing, unplug the Corded Water
Pump and repeat the steps above.
Troubleshooting Guide
TROUBLESHOOTING:
CARE AND MAINTENANCE:
Step 1
Step 3
Step 2
Step 4