Bestop HighRock 4x4 42910 User manual

Installation Instructions
INSTALLATION TIME SKILL LEVEL
1-1/2 Hours 3 - Moderately Difficult
TOOLS
HighRock 4x4TM
15mm, 18mm
and 1/2"
•HighRock 4x4TM Front Bumper
Part Number: 42910 / 44910
Vehicle Application: 2007 Jeep®Wrangler and
Wrangler Unlimited
•HighRock 4x4TM Approach RollerTM
Part Number: 42905 (Sold Separately)
•HighRock 4x4TM Tubular
Grill Guard
Part Number: 42915 /
44915 (Sold Separately)
T55 18mm
3/16" and
6mm
Front Bumper
www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Jeep®Accessories by Bestop.

HighRock 4x4TM Front Bumper Installation Instructions
Rev. D 1112 42910 / 44910 / 42905 / 42915 / 44915 pg. 2
Parts List and
Hardware Identification
Roller, Part Number 414.21, Qty - 1
42910 HighRock 4x4TM Front Bumper
Flat Washer, Part Number
414.23, Qty - 2
Roller Rod, Part Number 414.22, Qty - 1
42905 HighRock 4x4TM Approach RollerTM –
Sold Separately
Hex Bolt, Part Number
414.24, Qty - 2
42915 HighRock 4x4TM Tubular Grill Guard –
Sold Separately
Hex Bolt, Part Number
414.26, Qty - 4
Plastic Hole Plug, Part
Number 414.20, Qty - 4
Washer, Part Number
414.27, Qty - 4
Lock Washer, Part Number
414.28, Qty - 4
M10 Washer, Part Number
422.77, Qty - 8
M10 Nylock Nut, Part
Number 422.76, Qty - 8
Front Bumper,
Part Number 422.09(Gloss Finish),
Part Number 498.24 (Matte Finish),
Qty - 1
Fare Lead Roller Plate,
Part Number 414.19 (Gloss Finish),
Part Number 497.50 (Matte Finish),
Qty - 1 Tubular Grill Guard,
Part Number 498.20 (Gloss Finish),
Part Number 498.18 (Matte Finish),
Qty - 1
Hardware Kit Part # 498.33
Hardware Kit Part # 498.37
Hardware Kit Part # 498.36

42910 / 44910 / 42905 / 42915 / 44915 pg. 3Rev. D 1112
HighRock 4x4TM Front Bumper Installation Instructions
If you have a Fare Lead Roller, use the mounting
hardware provided with the roller to install it on the
Fare Lead Plate.
Install Fare Lead Roller on
Fare Lead Plate
Use a socket wrench to remove the four (4)
nuts on each side of the bumper that secure
the bumper to the frame. Access these nuts
from behind the bumper.
Slide the bumper off the studs.
Remove the Original Bumper
If you intend to install a fare lead
roller and/or a winch on your bumper,
you will need to install them on the bumper before
you install the bumper on the vehicle.
If you decide at a later date to install a fare lead
roller or winch on your vehicle, it will be easiest
to remove the bumper from the vehicle before
installing.
If you wish to install a winch without a fare lead
roller, skip step 3.
If you do not wish to install a fare lead roller or
winch at this time, skip steps 3 and 4.
NOTE
Fare Lead Plate
Fare Lead
Roller
Use the hardware supplied
with your fare lead roller to
secure it to the Fare Lead
Plate
If you have a Jeep® Rubicon with Factory Fog Lights, you
must disconnect them before removing the bumper.
Remove Nuts that
secure bumper
Remove Nuts that
secure bumper
Use a flat screwdriver or pliers to pry out the
four (4) fasteners that secure the edge of the
skid plate. Then use a phillips screwdriver to
remove the push fasteners that secure the
brackets on the skid plate to the frame.
Remove the Plastic Skid Plate
Use Flat Screwdriver
to pry out fasteners
Plastic Skid
Plate Bumper
Plastic Skid
Plate
Use Phillips
Screwdriver to
remove push
fasteners

HighRock 4x4TM Front Bumper Installation Instructions
Rev. D 1112 42910 / 44910 / 42905 / 42915 / 44915 pg. 4
Place the Tubular Grill Guard on the Front Bumper so that the holes in the guard line up with the holes in the
bumper. Use two (2) Hex Bolts, Washers, Lock Washers and Lock Nuts to secure each side of the Tubular
Grill Guard.
Install 42915 HighRock 4x4TM Tubular
Grill Guard – Sold Separately
Tubular Grill
Guard
Hex Bolts
If you intend to install a winch only, you
may install it directly on your bumper
and do not need to use the Fare Lead Plate.
NOTE
Place the Front Bumper on a flat surface. Place the
Fare Lead Plate assembly on the bumper and align
the mounting holes. Place the winch on top of the
plate and use the hardware provided with the winch
to secure it to the bumper.
Install Fare Lead Plate and/or
Winch on Bumper
Front Bumper
Fare Lead Plate
Winch
Use the hardware supplied
with your winch to install it
on the bumper
Front Bumper
If you are not installing an optional Grill Guard, in-
stall the Plastic Hole Plugs from the parts kit in the
holes in the bumper.
Install Hole Plugs
Front
Bumper
Plastic Hole Plugs
Washers
Lock
Washers
Front
Bumper
View from
Under Bumper

42910 / 44910 / 42905 / 42915 / 44915 pg. 5Rev. D 1112
HighRock 4x4TM Front Bumper Installation Instructions
Install Bumper Assembly
Install 42905 HighRock 4x4TM
Approach RollerTM – Sold
Separately
Place the Roller between the flanges on the Front
Bumper and align the holes in the Roller with the
holes in the flange. Slide the Rod through the flang-
es and the Roller. Install a Hex Bolt and a Washer
in each end of the Rod to secure it to the flanges.
Lift the Front Bumper Assembly onto the front
frame rails on the vehicle. Slide the studs in the
Bumper through the holes in the frame and install
an M10 Washer and M10 Nylock Nut on each stud.
Two or more people are
requiredtoliftthebumper
safely.
Roller
Rod
Flange
Washer
Hex Bolt
Bumper
Slide Studs through
holes in frame and
install M10 Washers
and M10 Mylock Nuts
View from
Under Bumper

HighRock 4x4TM Front Bumper Installation Instructions
Rev. D 1112 42910 / 44910 / 42905 / 42915 / 44915 pg. 6
For further information or request for warranty work, please contact:
Bestop Inc. Customer Service
[phone]
[phone]
Limited Warranty
We warrant our product to be free from defects in material and workmanship, for the terms specified below, provided there has been normal use and
proper maintenance. This warranty applies to the original purchaser only.All remedies under this warranty are limited to the repair or replacement of
any item or items found by the factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a
copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you
freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstallation, misuse,Acts of God, or by defective parts
not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL “PRODUCTS” MANUFACTURED BY OUR COMPANY: ONE YEAR FROM DATE OF
PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITYAND/OR FITNESS FORAPARTICULAR PURPOSE CREATED HEREBYARE LIMITED IN
DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.