Bestop 29284 User manual

P1 - 29284 - Rev. C 1115 Installation Instructions - Seat Cover, Rear Kit © 2015 Bestop, Inc.
Installation Instructions
Seat Cover, Rear Kit
Vehicle Application:
Wrangler Unlimited
2007, 2013-2017
Part Number 29284
Installation Tips
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit, and could
place occupants of the vehicle in a potentially dangerous situation.
To reduce the risk of accidental injury: Follow all vehicle Manufacturer’s and Bestop®
safety messages, application and installation instructions.
• Do not remove seats from the vehicle to install this product.
• Fit and maintain sides of seat cover as tight to seat as possible, always
matching front to side seam of seat with similar panels and seams of seat cover.
• Remove headrest carefully to avoid damaging manufacturer’s wiring.
Assure all plugs are connected after installation of seat cover.
• Do not use and replace if seat cover becomes damaged or wear no longer allows
tight fit to seat sides.
Tools
Safety Glasses
Support
We’re here to help!
Go to www.Bestop.com and
click “Contact Us”
See a video showing
installation of this product at:
www.bestop.com/video
WARNING
Installation Time
Skill Level
1 Hour
2 - Moderately Difficult

Parts List
- Required parts for each installation section - Page number in Installation Guide
Section 3 Seat Bottom Covers Section 3 Page 6Page 6
Section 1 Seatback Covers Section 2 Seat Bottom Covers Pages 5-6Pages 3- 4
© 2015 Bestop, Inc.P2 - 29284 - Rev. C 1115 Installation Instructions - Seat Cover, Rear Kit
Installation Instructions
Seat Cover, Rear Kit
Vehicle Application:
Wrangler Unlimited
2007, 2013-2017
Part Number 29284
Large
Seat Bottom Cover
Qty. 1
Small
Seat Bottom Cover
Qty. 1
Seat Bottom
Elastic Cord S-hooks
Qty. 2
Large
Seatback Cover
Qty. 1
Small
Seatback Cover
Qty. 1
Headrest Covers
Qty. 2 sets of 2
2007
Vinyl Covers
2013-2017
Fabric Covers
OR

Section 1 Install Seatback Covers
P3 - 29284 - Rev. C 1115 © 2015 Bestop, Inc.
Page 3
Step 1 Step 2
Installation Instructions - Seat Cover, Rear Kit
Unzip both seat covers
before installing.
1 Unzip the back of the Small seatback cover.
2 Slip the seat cover over the headrest and
over the Small seatback. You will have to open
the hook-&-loop hole at the top of the seat
cover to allow the headrest to pass through.
Step 1
1 Unzip the back of the Large seatback cover.
2 Slip the seat cover over the headrest, under
the seatbelt, and over the Large seatback. You
will have to open the hook-&-loop hole at the top
of the seat cover to allow the headrest to pass
through.
Step 2
OR
2
1
2

Section 1 Install Seatback Covers (cont.)
P4 - 29284 - Rev. C 1115 © 2015 Bestop, Inc.
Page 4
Step 1 Step 2
Installation Instructions - Seat Cover, Rear Kit
Tilt the seatback forward about halfway,
which will provide a space between the
seatback and seat bottom.
With the seatback tilted forward, tuck the
flap at the bottom of the Large seatback
cover between the seatback and the seat
bottom.
Repeat this for the Small seatback cover.
Move both seatbacks back to upright.
Step 1 1 Tuck the flaps between the headrest posts under-
neath the seat covers at the rear. Close and secure
the openings for the headrests with the mating hook-
&-loop strips. Make sure that the seatback release
latches are accessible on both seats.
2 Zip the seatback covers closed on both the Large
and Small seatback covers. Make sure that the seat
belt is not caught in the cover and operates smoothly.
3 Tuck the flaps coming between the seatbacks and
seat bottoms under the bottom of each seatback
cover. Snug the fit by pulling down on the seatback
cover while lifting up on the flaps and pushing the
hook-&-loop strips firmly together.
Step 2
3
OR
2
1

Section 2 Install Seat Bottom Covers
P5 - 29284 - Rev. C 1115 Installation Instructions - Seat Cover, Rear Kit © 2015 Bestop, Inc.
Page 5
2
4
3
1 Slip the Small seat bottom cover over
the Small seat bottom.
2 Tilt the seatback halfway forward, to
open a space between the seatback and
seat bottom.
3 Feed the straps through between the
seatback and seat bottom, and bring
toward the front under the seat.
4 Attach the 2 nylon straps at the front
of the underside of the seat to the buckles.
Give the straps a gentle tug to snug
the covers.
Step 1
1 Slip the Large seat bottom cover over
the Large seat bottom.
Follow 2 3 and 4 from Step 1
doing all the same things as you did on
the Small seat bottom cover.
Step 2
Step 1 Step 2
1
1

Section 3 Install Seat Bottom Covers (cont.) & Headrest Covers
P6 - 29284 - Rev. C 1115 Installation Instructions - Seat Cover, Rear Kit © 2015 Bestop, Inc.
Page 6
Step 1 Step 2
1 Attach the two ends of the elastic cords
on the Small seat bottom cover to the
closed end of one of the s-hooks.
Attach the s-hook to a cross-member
or wire underneath the seat, making sure
to keep the cords away from the seat
adjustment tracks.
Repeat this procedure for the elastic cords
on the Large seat bottom cover.
Step 1 Step 2
Select the correct headrest covers from
the 4 headrest covers that come in the
installation kit. Use the headrest covers
labeled to match your vehicle’s headrest
material.
Wrap the headrest covers over the head-
rests, making sure that the crossed elastic
edging and internal label are at the back
of each headrest. Adjust the seams for a
smoother appearance.
Use the headrest
covers labeled to
match your vehicle’s
headrest material.
1

© 2015 Bestop, Inc.P7 - 29284 - Rev. C 1115 Installation Instructions - Seat Cover, Rear Kit
Installation Instructions
Seat Cover, Rear Kit
Vehicle Application:
Wrangler Unlimited
2007, 2013-2017
Part Number 29284
LIMITED WARRANTY
For further information or request for warranty work, please contact:
Bestop Inc., Customer Service
Toll-Free: [phone]
Main: [phone]
E-mail: [email protected]
Website: www.Bestop.com
We warrant our product to be free from defects in material and workmanship, for the terms specified below, provided there has been normal use and proper
maintenance. This warranty applies to the original purchaser only. All remedies under this warranty are limited to the repair or replacement of any item or items found
by the factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items
returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our
products caused by accidents, fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under
this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL “SOFT GOODS” MANUFACTURED BY OUR COMPANY (USING PRIMARILY VINYLS, PLASTICS, AND/OR
FOAM): ONE YEAR FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME
DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
WASHING:
Your seat covers are machine washable. Wash separately in COLD water with 1/4 of normal amount of soap. Hang Dry.