Better Air BA-1000Pro Instruction Manual

Quick Start Installation Guide
BA-1000Pro
Contact Us
844.44.PROBIO
[email protected]
betterairus.com
WARNING
The BA-1000Pro should only be used with the
power pack provided by the manufacturer.
KEEP OUT OF REACH OF CHILDREN.
AVOID SWALLOWING AND EYE CONTACT.
IF SWALLOWED - drink 1-2 glasses of water.
IN CASE OF CONTACT WITH EYES - ush with water.
CAUTION: Do not place directly under lights or
other heat sources over 100 degrees. Damage to
the BA-1000Pro may occur.
BA-1000Pro is designed to be used in conjunction
with your HVAC system to circulate benecial
bacteria, nourishing your environment and
supporting your indoor air quality, with a repetitive
ow of Enviro-BioticsTM.
BA-1000Pro disperses the Enviro-BioticsTM enhancing
your well-being, cleaning your air, surfaces and
objects, especially in those hard to reach areas.
BA-1000Pro System
BA-1000Pro Unit
Keys
Sticker
Blue Hose
Silver Tube
Metal Plate
Rell Bottle*
*Sold separately
Screws
Drywall
Anchors
Bolt
Adapter

Pre Installation
Timer Set Up
Plug into power supply. Press the ENT Button for
5 seconds to turn ON/OFF the system.
a. Press and hold the two arrow buttons on
the right for 5 seconds.
b. Use the up arrow to adjust hours / minutes.
c. Use the right arrow to shift between hours
and minutes.
d. Press ENT to save.
Dispersion Rate Set Up
Program 1
Rell will last approximately 6 months.
The BA-1000Pro is pre-programmed for this dispersion
rate and is recommended for residential use.
Program 2
Rell will last approximately 3 months.
This dispersion rate is recommended for high trac
areas. To select Program 2, simply press the up
arrow once.
Program 3
Rell will last approximately 1 month.
This dispersion rate is recommended for large
commercial spaces or residential remediations.
To select Program 3, simply press the up arrow twice.
ENVITONMENTAL PROBIOTICS
BACK ENT
Mo Tu We Th Fr Sa Su
09:32 1
2017 - 12 - 14
IMPORTANT Always turn power o when removing and replacing the rell bottle.
Air Flow
Installation Instructions
Step 1
Using the stickers and screws provided, mount
the BA-1000Pro to the wall near the HVAC
system and air duct supply.
The wall must be capable of holding a weight up
to 50lbs. Unit must be kept in upright position.
Do not lay at or place sideways.
Step 2
Drill a hole in the air supply duct above the air
handler and insert the silver tube in the direction
of the air ow. Make sure the blue hose is free from
knots or obstructions for optimal airow.
Secure and seal the metal plate to the air duct
using HVAC tape.
Step 3
Open the BA-1000Pro to insert the rell bottle.
Shake and gently insert the bottle in the vertical
position and rotate clockwise until secure.
Step 4
Plug in the BA-1000Pro to the power supply.
Once plugged in, the unit will turn on automatically.
The system is now ready to use.
Air Flow