Better Air BA-1200 Instruction Manual

Quick Start Installation Guide
BA-1200 is designed to disperse beneficial bacteria,
nourishing your environment and supporting your
indoor air quality,with a repetitive flow of Enviro-
Biotics.
Living and working in an environment rich with Enviro-
BioticsTM enhances your well-being by cleaning your air,
surfaces and objects, especially in those hard to reach
areas.
BA-1200 System
BA-1200 Unit
*
*Sold separately
Blue Hose
Silver Tube
Metal Plate Bolt
Adapter
Keys
Sticker
BA-1200
•Read all the instructions before using the
•
necessary when a product is used near
•
•
•
he
connection to t
•Only use the dby betterair
•fully bend, pull,
•re
cleaning the
hold by the co
•
•Clean the unitwith dry fabric, do not use
detergent to
•
•
•
•
•
place directly under lights or
other heat so
•CAUTION
I ORTANT SA ET INSTRUCTIONS
WARNIN :
Contact Us
Better Air Environments, LLC ,8 Woodfield Road
Andover, NJ 07821 833-692 -3883
When using electric products, basic precautions
should always be followed, including the following:
SAVE THESE INSTRUCTIONS
Fahrenheit

Pre Installation
Dispersion rate set up
Plug into power supply and press the ON button. Open
the door using the provided keys.
Program 1
Refill will last approximately months.
The BA-1200 is pre-programmed for this dispersion rate.
Program 2
Refill will last approximately 2 months.
To select Program 2, simply press the up arrow once.
Program 3
Refill will last approximately month.
To select Program 3, simply press the up arrow twice.
Time Set Up (optional)
a. Press and hold the two arrow buttons on
the right for 5 seconds.
b. Use the up arrow to adjust hours / minutes.
c. Use the right arrow to shift between hours
and minutes.
d. Press ENT to save.
Free Stand Installation (up to 3,500sqf)
Before installing the unit, open the aerial dispersion
railing, unscrew the bolt. Replace the railing.
Wall Mount installation for optimal performance: It
is recommended to position the BA-1200 wall mount
in proximity to an air flow. Drill two screws to fasten
the wall mount on the wall. Make sure that there is
an electric outlet in proximity to installation for the
electric cord to reach.
Refill installation
Installation Instructions
Your BA-1200 should be located out of the reach of young
children or pets. It is not advised to place the BA-1200 near
an open door or a window that leads outdoor in order to
obtain maximum coverage indoors.
HVAC Installation (up to ,00sqf)
Step 1
Using the sticker provided, mount
the BA-1200 to the wall near the HVAC
system and air ductsupply.
The wall must be capable of holding a weight up
to 50 lbs . Unit must be kept in upright
position.
Do not lay flat or place sideways.
Step 2
Drill a hole in the air supply duct above the air
handler and insert the silver tube in thedirection of
the air flow. Make sure the blue hose is free from
knots or obstructions for optimal airflow.
Secure and seal the metal plate to the air duct using
HVAC tape.
To insert the Enviro-Biotics refill bottle:
Open the door of the BA-1200 unit
Shake and gently insert the bottle in the vertical
position and rotate clockwise until secure.
Plug in the BA-1200 to the power supply.
Once plugged in, turn on the unit with the ON/OFF
button.
all c nst cti ns
As all appliance nte the p ct shall e
nte n the pl a in in
Program 6
Refill will last approximately 6 month.
To select Program 6, simply press the up arrow 5 times.