Better Air BA-500 Instruction Manual

Quick Start Installation Guide
BA-500
Contact Us
Better Air Environments, LLC ,8 Woodfield Road
Andover, NJ 07821 833-692 -3883
nourishing your environment and supporting your
Biotics.
Living and working in an environment rich with
Enviro-BioticsTM enhances your well-being by
cleaning your air, surfaces and objects, especially in
those hard to reach areas.
BA-500 System
BA-500 Unit
Keys
Sticker
Bottle*
*Sold separately
I I I
I
•
•
•
•
•
•
•
•
•
•t
•
•
•
•
•
o
55
•I
only. It
I I

Pre Installation
Dispersion rate set up
Plug into power supply and press the ON button.
Open the door using the provided keys.
Program 1
Refill will last approximately months.
The BA-500 is pre-programmed for this dispersion rate
and is recommended for residential use.
Program 2
Refill will last approximately months.
areas. To select Program 2, simply press the up
arrow once.
Program 3
Refill will last approximately month.
This dispersion rate is recommended for large
commercial spaces or residential remediations.
To select Program 3, simply press the up arrow twice.
gram 3
Time Set Up (optional)
a. Press and hold the two arrow buttons on
the right for 5 seconds.
b. Use the up arrow to adjust hours / minutes.
c. Use the right arrow to shift between hours
and minutes.
d. Press ENT to save.
ENVITONMENTAL PROBIOTICS
BACK ENT
Mo Tu We Th Fr Sa Su
09:32 1
41-21-7102
IMPORTANT le.
Choosing your location
Your BA-500 should be located out of the reach of young
children or pets. It is not advised to place the BA-500 near
an open door or a window that leads outdoor in order to
obtain maximum coverage indoors
wall constructions :
It is recommended to position the BA-500 wall
mount in proximity to an air flow. Drill two screws
to fasten the wall mount on
the wall. Make sure that there is an electrical outlet
in proximity to installation for the electrical cord to
reach.
As wall appliance mounted the product shall be
To insert the Enviro-Biotics refill bottle:
Open the door of the BA-500 unit
Shake and gently insert the bottle in the vertical
position androtate clockwise until secure.
Plug in the BA-500 to the power supply.
Once plugged in, turn on the unit with the ON/OFF
button.
Bottle installation instructions