Beurer janosch User manual
BABY FOOD AND BOTTLE WARMER Instructions for Use
9
Included in delivery:
Baby food warmer•
Lifter with lid•
These Instructions for Use•
Dear customer,
We are delighted that you have chosen to purchase a product from our range. Our name is
synonymous with high-calibre and thoroughly tested quality products in the areas of thermals,
weight, blood pressure, body temperature, pulse, gentle therapy, massage and air. Please read
through these Instructions for Use carefully and retain them for future reference; make them
available to other users and observe the information.
Best wishes,
Your Beurer team
For your information1
Functions of the device
With this baby food warmer you can quickly heat up all sorts of baby food and drinks and keep
them warm in an energy-ecient way. The device is suitable for all conventional baby bottles
and jars.
The device has the following functions:
Rapid warming of baby food/drinks•
Keeps food/drinks constantly warm with exact entry of the desired temperature•
Symbol key2
The following symbols are used in the Instructions for Use.
Warning Warning about risk of injury or danger to health
Attention Safety notice about possible damage to the device/accessories
Note Note about important information
English
Contents
1 For your information .............................. 9
2 Symbol key............................................ 9
3 Intended use.......................................... 10
4 Safety notices........................................ 10
5 Device description................................. 11
6 Getting started....................................... 11
7 Operation............................................... 11
8 Cleaning and maintenance.................... 12
9 Disposal................................................. 13
10 Technical data ....................................... 13
11 Troubleshooting..................................... 13
10
Intended use3
Only use the device to warm up baby food/drinks and keep them warm.•
The device is intended for use in the domestic/private environment only, not in•
commercial situations.
This device is not intended for use by persons (including children) with limited•
physical, sensory or mental abilities, or those lacking in experience and/or knowl-
edge, unless supervised by a person responsible for their safety, or instructed on
how to use the device by such person.
Children should be supervised around the device to ensure they do not play with it.•
Any improper use can be dangerous.•
Safety notices4
Safety notices
Warning:
During the warming process, the water becomes hot (risk of scalding).•
Check the temperature of the food before the feed (risk of burning).•
Keep packaging material away from children (danger of suocation).•
The device must only be used on a mains socket with a residual-current protective•
device (risk of electric shock).
Unplug the mains cable after each usage and before any cleaning (risk of electric•
shock).
Important: To avoid damage to the device, please observe the following:
Fill the device with water before switching it on.•
Do not operate the device outside.•
The device must only be used on an AC network and with the voltage specified on•
the type plate.
Do not remove the mains plug from the socket by pulling on the cable!•
Do not pull, twist or bend the mains cable.•
Never submerge the device in water. Never rinse it in running water.•
Do not use any additional parts that are not recommended by the manufacturer or•
oered as accessories.
General advice
Repairs must only be carried out by Customer Services or authorised suppliers.•
Do not open or repair the device yourself under any circumstances, otherwise its
perfect functioning is no longer guaranteed. Failure to observe this will invalidate
the warranty.
If you should have any questions about using our devices, please contact either•
your retailer or Customer Services.
11
Device description5
Overview
Lifter1
Lid2
Mains cable3
MIN/MAX display4
Control panel5
Power LED6
Heat LED7
Time/Temperature display8
Button for setting time and/9
or temperature
10 button
Rapid heat-up button11
1
6
5
9
8
4
2
7
10
3
11
Getting started6
Before use, ensure that the device and accessories (including mains cable) do not have any1.
visible damage.
Place the device on a firm, even surface.2.
Connect the mains plug to the socket. The power LED lights up. The device is ready for use.3.
Operation7
Warming up baby food/drinks and keeping them warm:
Place the lifter in the baby food warmer and place the bottle or jar in the lifter.1.
Fill the container with sucient water depending on the size of the jar. Ensure that the water2.
does not overflow.
Starting the warming process:
Press button1. followed by the rapid heat-up button .
The warming time that is currently set now flashes on the display. On first use, the default
setting of 15 minutes is displayed. If the device remains plugged in after the first use, it
shows the last entered warming time when subsequently used.
Enter the warming time (3 - 18 minutes). To do so, press the2. button repeatedly until you
have reached the desired warming time. The time is entered in minute increments; after “18”,
the display begins again at “3”.
The warming time is dependent on the initial temperature as well as the type and
quantity of food/drink. The following table oers a guide to selecting the warming time
for food/drinks with an initial temperature of 13 °C (warming to 37 °C).
Duration
100 ml milk 9 min.
250 ml milk 15 min.
Press the rapid heat-up button3. again to start the warming process.
The display now continuously shows the remaining warming time. The display starts to flash
12
one minute before the end of the warming process. If the temperature reaches around 42 °C,
the warming process stops and both the heat LED and the display are no longer illuminated.
Starting the warming process without prior warming:
Press the1. button to switch the device on. The current temperature is shown on the
display. The default setting is 37 °C.
To enter the temperature, press the2. button repeatedly until you have reached the desired
temperature for keeping the food/drink warm (between 35 °C and 85 °C). The temperature
increases in the steps 37, 38, 40, 45, 50, 55 etc. until the display reaches “85” and then
begins again at 35 °C.
Now press the3. button again to start the keeping warm process.
Ending the warming/keeping warm process:
Press the1. button for 2 seconds.
The display and the heater are switched o.
Remove the bottle/jar using the lifter.2.
Unplug the mains cable after each usage, pour all the water out and dry the device with a3.
cloth.
Shake the bottle or stir the food in the jar.•
Check that it is the correct temperature.•
To prevent the breeding of bacteria, which multiply fastest in the temperature range•
from around 32°C to 42°C, please use the heated baby food as soon as possible.
We do not recommend keeping the food warm for any longer, as this can cause•
important vitamins to be lost.
For hygienic and microbiological reasons, do not reheat food that has already been•
heated.
Take care not to overheat food/liquids.•
Cleaning and maintenance8
The service life of the device depends on its careful handling:
To extend the service life of the device, we recommend that it is not (continuously) operated•
in the high temperature range.
Use boiled or filtered water for warming baby food. This will reduce the build-up of lime•
scale.
Unplug the device before cleaning.•
To clean the device, use only a damp cloth. Do not use any scouring agents or other clean-•
ing products.
Descale the device using vinegar or citric acid. Place the lifter in the device, mix 50 ml of•
household vinegar with 100 ml of cold water or a packet of citric acid with 200 ml of cold
water and pour this solution into the device. Leave the solution to work until the lime scale
has been removed; do not operate the device during this time. Pour the liquid away, rinse
the device out thoroughly and finally dry it with a cloth.
Descale the device approx. every four weeks.•
13
Disposal9
In the interests of environmental protection, these devices must not be disposed of in the
household waste at the end of their service life. They should be disposed of at the appropriate
regional collection points.
Please observe local regulations when disposing of materials.
Dispose of the device in accordance with the EC directive on old electric and elec-
tronic devices 2002/96/EC – WEEE (Waste Electrical and Electronic Equipment).
If you have queries, contact the appropriate local authorities.
Technical data10
Operating voltage: 220–240 V ~ / 50/60 Hz
Power consumption: 80 watts
Heating time: 3 - 18 min.
Temperature for keeping warm: 35 °C - 85 °C
Troubleshooting11
Fault Cause Action
Water leaks from the bottom
of the device when in use.
Device faulty Switch o the device imme-
diately, unplug it, let the
water drain out and return the
device to the retailer.
The warming process does
not start or does not end.
Thermostat broken Switch o the device imme-
diately, unplug it, let the
water drain out and return the
device to the retailer.
No LED display Mains plug not (correctly)
plugged in or device faulty
Check that the mains plug
is (correctly) plugged in. If
there is still no display, switch
o the device, unplug it and
return it to the retailer.
The baby food warmer does
not switch on once it is
plugged in.
No electricity Check that the mains plug is
correctly plugged in.
The temperature on the
display does not increase
once the warming process is
started; the device switches
itself o after a while.
No water in the device Unplug the device, let it cool
down, then fill it with water
and start the warming proc-
ess as described in these
instructions.
The food is not warm at the
end of the warming process.
Not enough water in the
device
Unplug the device, let it cool
down, then fill it with sucient
water and start the warming
process as described in these
instructions.
Table of contents
Other Beurer Baby Accessories manuals
