BevLes Proofer/Hot Cabinet PHC70-MP17 User manual

Options & Accessories
• Door hinging
• Corner bumpers
• Perimeter bumper
• Dutch doors
• Drip trough
Warranty & Cerifications
Parts and Service Warranty
• Protected by BevLes 2 year parts and 1
year service warranty
Certified by the following:
PROOFER / HOT CABINET
Non-Insulated
Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [email protected]
Design Features
Add Increased Efficiency!
• Proof or hold with adjustable temperature
from 80°F (27°C) to 180°F (82°C)
• Maintains uniform temperature throughout
cabinet
• "Cast-in" humidity system prevents
element burnout from water spills and
potential injury from accidental contact
with exposed heating elements
• Self-draining feature collects excess
moisture into a standard 18” x 26” bun
pan (not included) below the base of the
cabinet
• Completely removable interior components
for quick and easy cleaning
Quality Construction
• Aluminum construction
• Full-length Lexan® door with heavy-duty
hinges, positive closing latch and perimeter
gasket
• Extruded universal pan supports accept a
variety of pans and screens
• Removable heating module with separate
controls for heat and humidity
• Heavy-duty plate-type casters with 5" hard
neoprene wheels, front two with brakes
• One piece, formed base with welded
corners
Model: PHC70-MP17

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [email protected]
*Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.
PROOFER / HOT CABINET
Non-Insulated
H
DW
57.750 in
146.7 cm
Construction:
• Body: .063 aluminum
• Door: Clear Lexan® with an extruded aluminum
frame
• Door Latch and Hinges: Patented positive action
door latch with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 aluminum
• Rear (Air Duct) Panel: .063 aluminum
Pan Support Assembly:
• Pan Supports: Extruded universal pan supports
adjustable on 1 1/2" centers
• Uprights: .100 aluminum slotted on 1 1/2" centers
Electrical:
• 120V-20A, 1PH service
• Optional 208/240V-20A, 1PH service
• Switch: Heavy-duty, 20 Amp, with water shed seal
• Cord and Plug: 8' cord with 20A molded plug
(NEMA 5-20P); 208/240V models provided with
cord only
Heating Module and Controls:
• Bottom mounted heating unit with a one (1) piece
modular drop-in design blower assembly
• Entire bottom mounted heating unit is easily
removable for cleaning and maintenance
• Air heating element rated at 1600W, 120V
• Humidity heating element rated at 400W, 120V
• 5 quart (4.7 liter) cast water reservoir
• Lexan® water reservoir cover
• Easy to operate controls feature precision
thermostat, variable humidity control and dial
thermometer
• All controls are visible and operable from exterior
of cabinet
Casters:
• Heavy-duty plate type casters, with 5” hard neoprene
wheels; all swivel, with wheel brakes on front two
casters
Shipping:
• Freight Class: 85
• FOB: Cheyenne, WY 82007
Electrical Voltage Watts Amps Electric Service Phase Hertz Clearances
Standard 120 2000 16 20A Dedicated Circuit 1 50/60 Zero Clearance Cabinet
Optional 208/240 2000 8 15A Dedicated Circuit 1 50/60 Zero Clearance Cabinet
*Adjustable on 1 1/2” centers **Also accommodates 19” x 19” and 23” x 23” screens
Model Capacity Dimensions Ship Wt. Act. Wt.
18x26 12x20 SPC’G* H W D
PHC70-MP17 17 34 3” 71.5” (181.6 cm) 29” (73.7 cm) 33.5” (85.1 cm) 205 lbs (93 kg) 180 lbs (81.6 kg)
4/20/05
#B203
Model: PHC70-MP17