Beyerdynamic XELENTO REMOTE User manual

Xelento wireless – In-Ear eadphones 3
DE:
Eine ausführliche Bedienungsanleitung in Ihrer Sprache
finden Sie unter www.beyerdynamic.com/xelento-wireless
EN:
For detailed operating instructions in your language, please
visit www.beyerdynamic.com/xelento-wireless
FR:
Vous pouvez télécharger la notice d'utilisation dans votre
langue respective sur www.beyerdynamic.com/xelento-
wireless
ES:
Podrá descargar el manual de instrucciones en su idioma
desde www.beyerdynamic.com/xelento-wireless
R :
Руководство по эксплуатации на Вашем языке Вы мо-
жете загрузить здесь www.beyerdynamic.com/xelento-
wireless
JA:
各国の言語の取扱説明書は次のホームページからダウン
ロードしてください。www.beyerdynamic.com/xelento-
wireless
KO:
원하는 언어로 된 안내 설명서를 다운로드하세요:
www.beyerdynamic.com/xelento-wireless
ZH:
您可以在www.beyerdynamic.com/xelento-wireless下载所
需语言的操作说明书。

Xelento wireless – In-Ear eadphones
4
Thank you for your trust and for choosing Xelento wireless
In-Ear eadphones. To ensure an optimum listening
experience, we would like to give you a brief primer on how
to use Xelento.
Safety instructions
Caution:
When you connect the in-ear headphones, please
make sure that the volume level is set to
minimum. Adjust the volume level only after
inserting the eartips. To avoid possible hearing
damage, do not use your in-ear headphones for extended
periods of time at high volume. The ability to hear your
own voice while listening and speaking normally with
in-ear headphones can serve as a measure of correct
volume adjustment.
We would like to point out that excessively high volumes and
long listening times may cause hearing damage. earing
defects always constitute an irreversible impairment of
hearing ability.
Always ensure an adequate volume level. It is advisable to
keep listening times as short as possible at high volume
levels. According to the Occupational ealth and Safety
Regulations of German trade associations BGV B3, noise
pollution e.g. in the workplace must not exceed 85 dB
(room volume level) during a maximum permissible
listening time of 8 hours. If the volume level is increased
by 3 dB respectively, the permissible listening time is cut
in half, i.e. at 88 dB, the listening time is 4 hours, at
91 dB 2 hours, etc.

english
Xelento wireless – In-Ear eadphones 5
Danger to life!
In-ear headphones drastically reduce perception of
external sounds. Using in-ear headphones in road traffic
can be potentially dangerous. The user's hearing must not
be impaired to the extent that it causes road safety risks.
Please also make sure that you do not use the in-ear
headphones within the action area of potentially dangerous
machines and tools.
Risk of injury!
Avoid strong movements when using wired in-ear head-
phones. You might seriously hurt yourself especially if you
wear piercings, earrings, glasses, etc., where the wire can
get caught.
Changed acoustic perception
For many people, wearing in-ear headphones needs getting
used to, because acoustic perception of their own voice
and of the body as well as inner ear sounds which occur
while walking differ from the "normal" situation without in-
ear headphones. owever, this initially strange sensation
usually diminishes after wearing them for a while.

Xelento wireless – In-Ear eadphones
6
Box contents
• Xelento wireless In-Ear eadphones,
left and right earphones
• Bluetooth connection with remote control
• Jack connection cable with remote control,
4-pole Jack 3.5 mm
• Seven pairs of silicone eartips
• Three pairs of foam eartips
(type Comply™ Tx-500)
• Cable clip for fastening the cable to clothes
• Cable clip for fastening the rechargeable battery to clothes
• Storage case
• One pair of spare protective grids
• This Quick Start Guide
Connection and cable replacement
To detach or fasten the cable, hold Xelento wireless by the
earphone housing and by the plug connector. Do not pull
the cable directly; you might damage the cable or the
earphones!
The right-hand side is marked by a raised dot on the
earphone housing and on the cable end.
Disconnect cable

english
Xelento wireless – In-Ear eadphones 7
Since no two ears are alike, seven pairs of silicone eartips
are provided in the following sizes to allow optimum
adaptation to your ear.
Alternatively, three additional pairs of foam eartips (type
Comply™ Tx-500) are provided in the following sizes to
ensure secure seating in the ear.
Selecting the right eartips
The Xelento package includes several eartips. Select the
eartips which suit you best to ensure a comfortable and
secure fit, good ambient noise attenuation and optimum
sound.
Connect cable
2x each:
2x each:

Xelento wireless – In-Ear eadphones
8
Inserting and wearing Xelento
wireless
Due to the shape of the earphone
housing, it is necessary to guide the
cable behind the ear cup when
inserting Xelento wireless, see
adjacent drawing. Please make sure
that the cable is conducted upward.
Only in this way is it possible to
wear the earphones correctly and
comfortably.
The right-hand earphone housing
and cable end each have a small
raised dot to mark the right-hand
side.
Operating elements



 Increase volume
 Multifunction button
 Reduce volume
 LED
 Microphone
 Aluminium cap
 USB connection




remote control rechargeable battery pack

english
Xelento wireless – In-Ear eadphones 9
Turning on / off
The functions listed below refer to the use with the Blue-
tooth connecting cable.
•Turning on
Press multifunction button  for 2 seconds.
•Turning off
Press multifunction button  for 6 seconds.
Note firmware version 1.0
The following information applies to firmware version 1.0
which is installed on this Bluetooth connecting cable.
Pairing with the player
Before you use the Xelento wireless for the first time, you
have to pair it with your mobile phone or another Bluetooth
enabled device. The pairing process may be different with
various players. Please refer to the appropriate manual of
the player.

Xelento wireless – In-Ear eadphones
10
• When the Xelento wireless is turned off, press the
multifunction button for 6 seconds to start the
Bluetooth mode (the LED  of the remote control will
slowly flash blue and red in turns).
• Activate the Bluetooth function on your player and, if
necessary, search for new devices.
• Select “beyerdynamic Xelento wireless” under the
available devices in the Bluetooth menu of your player
and pair both devices. Each time when turning on, both
devices are paired automatically.



Alternatively, you can pair the Xelento wireless with an
NFC-enabled player via NFC. It is not important if the
Xelento wireless is turned on or off. If the Xelento wireless
is turned off, it is automatically turned on due to the data
transmission.
• Activate the NFC function in your player so that all
necessary information can be transferred to the player
and pairing can be established.
• old the player closely over the rear of the remote
control of the Xelento wireless.
• Now both devices will automatically be paired.

english
Xelento wireless – In-Ear eadphones 11
Media playback
Please note that the functions described below, depend on
the player and the player software and may not be
available. The Xelento wireless only transmits control
signals that comply with the Bluetooth standard.
•Start / stop media p ayback:
Briefly press the multifunction button  once.
•P ay next track:
Briefly press the multifunction button  twice.
•P ay previous track:
Briefly press the multifunction button  three times.
•Fast forward:
Briefly press the multifunction button  once and hold
it down after the second press.
•Rewind:
Briefly press the multifunction button  twice and hold
it down after the third press.
•Increase vo ume:
Press the (+) button .
•Reduce vo ume:
Press the (-) button .
 

Xelento wireless – In-Ear eadphones
12
Call personal assistent
•To ca the persona assistent on your smartphone or
tab et such as Siri, Goog e Assistant etc.:
Press the multifunction button  for 2 seconds.
Call control
•Accept / end a ca :
Briefly press the multifunction button .
•Reject a ca :
Press the multifunction button  for 2 seconds.
•Increase ca vo ume:
Press the (+) button .
•Reduce ca vo ume:
Press the (-) button .
 
 

english
Xelento wireless – In-Ear eadphones 13
Charging
• Pull the aluminium cap of
the battery pack in the
direction of the cable to access
the USB connector .
• Connect the Xelento wireless to
any USB-compliant, voltage-
carrying USB connector (such
as a USB power supply) by
using the supplied USB
charging cable.
• During charging the LED  of
the remote control slowly
flashes red. As soon as the
LED  is permanently red, the
battery is fully charged.
• After charging, remove the USB
charging cable and cover the
USB connector  with the
aluminium cap.




Xelento wireless – In-Ear eadphones
14
Disposal
This symbol on the product, in the
instructions or on the packaging means that
your electrical and electronic equipment
should be disposed at the end of its life
separately from your household waste. There
are separate collection systems for recycling
in the EU. For more information, please
contact the local authority or your retailer
where you purchased the product.
Battery disposal
This symbol means that according to local
laws and regulations your product and/or its
battery shall be disposed of separately from
household waste. When this product reaches
its end of life, take it to a collection point
designated by local authorities. The separate
collection and recycling of your product
and/or its battery at the time of disposal will
help conserve natural resources and ensure
that it is recycled in a manner that protects
human health and the environment.
• Old batteries may contain substances
that are harmful to your health and
environment.
• Dispose used batteries always according
to the applicable disposal regulations.
Please do not throw used battery packs
into the fire (danger of explosion) or your
household rubbish, take them to your
local collection points. The return is free

english
Xelento wireless – In-Ear eadphones 15
and required by law. Please dispose discharged batter-
ies only.
• All batteries are recycled to reclaim valuable material
such as iron, zinc or nickel.
Technical specifications
RF frequency range . . . . . . . . . 2.4000 – 2.4835 G z
Transmission power . . . . . . . . . 10 mW
Operating /
charging temperature . . . . . . . . 0 to 35 °C
Detailed technical specifications can be found on the
internet at: www.beyerdynamic.com/xelento-wireless
Simplified E Declaration of Conformity
ereby, beyerdynamic declares that the radio equipment
is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the
following internet address:
http: //www.beyerdynamic.com/cod

Xelento wireless – In-Ear eadphones
16
FCC / IC Regulation
FCC ID: OSDXELENTO
Canada IC: 3628C-XELENTO
NOTICE:
This device complies with Part 15 of the FCC Rules [and
with Industry Canada licence-exempt RSS standard(s)].
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) his device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.
Le présent appareil est conforme aux CNR d’Industrie Ca-
nada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscep-
tible d’en compromettre le fonctionnement.
NOTICE:
Changes or modifications made to this equipment not ex-
pressly approved by beyerdynamic may void the FCC aut-
horization to operate this equipment.
Radiofrequency radiation exposure information:
For body worn operation, this phone has been tested and
meets the FCC RF exposure guidelines when used with the
beyerdynamic accessories supplied or designated for this
product. Use of other accessories may not ensure compli-
ance with FCC RF exposure guidelines.

english
Xelento wireless – In-Ear eadphones 17
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. owever, there is
no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
– Reorient or relocte the receiving antenna.
– Increase the separation between the equipment and re-
ceiver.
– Connect the equipment into an outlet on a circuit diffe-
rent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
CA TION: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could void
the user’s authority to operate the equipment.
Made in Germany
This device is granted pursuant to the Japanese Radio Law
(電波法) and the Japanese Telecommunications Business
Law (電気通信事業法)
This device should not be modified (otherwise the granted
designation number will become invalid.

Xelento wireless – In-Ear-Kopfhörer
18
Vielen Dank für Ihr Vertrauen und dass Sie sich für den
Kauf des Xelento wireless In-Ear-Kopfhörers entschieden
haben.
Für ein bestmögliches örerlebnis möchten wir Ihnen eine
kurze Einführung geben, wie Sie den Xelento wireless
verwenden können.
Sicherheitshinweise
Vorsicht:
Wenn Sie den In-Ear-Kopfhörer anschließen,
achten Sie darauf, dass die Lautstärke auf
Minimum eingestellt ist. Regeln Sie die
Lautstärke erst nach Einsetzen des örers. Zur
Vermeidung eines möglichen Gehörschadens sollten Sie
Ihren In-Ear-Kopfhörer nicht für längere Zeit bei hoher
Lautstärke benutzen. Als Maß für die Einstellung der Laut-
stärke dient die Prüfung, ob Sie beim ören und gewöhn-
lichem Sprechen mit In-Ear-Kopfhörer noch Ihre eigene
Stimme wahrnehmen können.
Wir möchten Sie darauf hinweisen, dass zu hohe
Lautstärken und zu lange örzeiten das Gehör schädigen
können. örschäden stellen immer eine irreversible
Beeinträchtigung des örvermögens dar.
Achten Sie stets auf eine angemessene Lautstärke. Als
Faustformel gilt: je höher die Lautstärke, desto kürzer die
örzeit. Gemäß der Berufsgenossenschaftlichen Vorschrift
für Sicherheit und Gesundheit bei der Arbeit BGV B3 darf
die Lärmbelastung z.B. am Arbeitsplatz 85 dB (Zimmer-
lautstärke) nicht überschreiten bei einer maximal
zulässigen örzeit von 8 Stunden. Wird die Lautstärke
jeweils um 3 dB erhöht, halbiert sich die zulässige örzeit,
d.h. bei 88 dB beträgt die örzeit 4 Stunden, bei 91 dB
2 Stunden usw.

deutsch
Xelento wireless – In-Ear-Kopfhörer 19
Lebensgefahr!
In-Ear-Kopfhörer reduzieren die akustische Außen-
wahrnehmung drastisch. Die Verwendung von In-Ear-Kopf-
hörern im Straßenverkehr birgt großes Gefährdungspoten-
zial. Das Gehör des Benutzers darf auf keinen Fall so stark
beeinträchtigt werden, dass die Verkehrssicherheit
gefährdet ist. Bitte achten Sie zudem darauf, dass Sie die
In-Ear-Kopfhörer nicht im Aktionsbereich von möglicher-
weise gefährlichen Maschinen und Arbeitsgeräten
verwenden.
Verletzungsgefahr!
Bei kabelgebundenen In-Ear-Kopfhörern sollten Sie heftige
Bewegungen vermeiden. Sie könnten sich ernsthaft
verletzen, insbesondere, wenn Sie Piercings, Ohrringe,
Brille usw. tragen, an denen das Kabel sich verfangen
kann.
Veränderte akustische Wahrnehmung
Für viele Menschen ist das Tragen von In-Ear-Kopfhörern
gewöhnungsbedürftig, da sich die akustische Wahrnehmung
der eigenen Stimme und des Körpers sowie auftretende
Innenohrgeräusche beim Laufen von der „normalen“
Situation ohne In-Ear-Kopfhörer unterscheiden. Diese
zunächst fremdartige Empfindung verringert sich jedoch
gewöhnlich nach einiger Zeit des Tragens.

Xelento wireless – In-Ear-Kopfhörer
20
Lieferumfang
• In-Ear-Kopfhörer Xelento wireless,
linker und rechter Ohrhörer
• Bluetooth-Anschlusskabel mit Fernbedienung
• Klinken-Anschlusskabel mit Fernbedienung,
Klinke 4-pol. 3,5 mm
• Sieben Paar Ohrpassstücke aus Silikon
• Drei Paar Ohrpasstücke aus Schaumstoff
(Typ Comply™ Tx-500)
• Klammer zur Befestigung des Kabels an Kleidung
• Klammer zur Befestigung des Akkupacks an Kleidung
• Etui zur Aufbewahrung
• Ein Paar Ersatz-Schutzgitter
• Diese Kurzanleitung
Anschluss und Kabelwechsel
Zum Trennen oder Befestigen des Kabels halten Sie den
Xelento wireless am Ohrhörergehäuse und am Stecker fest.
Ziehen Sie niemals direkt am Kabel, Sie könnten das
Kabel oder den Ohrhörer beschädigen!
Die rechte Seite ist durch jeweils einen erhabenen Punkt
am Ohrhörergehäuse und am Kabelende gekennzeichnet.
Kabel abziehen