Beyerdynamic XELENTO REMOTE User manual

Xelento wireless – In-Ear Headphones 3
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
126
 160
192
 224

Xelento wireless – In-Ear Headphones
4
Thank you for purchasing the Xelento wireless in-ear head-
phones.
To ensure an optimum liening experience, we would like to
give you comprehensive information on how to use Xelento
wireless.
Safety inructions
• Read these operating inructions carefully and
completely before using the product.
• Do not use the product when it is damaged.
• beyerdynamic GmbH & Co. KG will not be liable if
any damage, injury or accident occurs due
to negligent, incorrect or inappropriate operation
of the product.
Avoid damage to your health and accidents
• When you connect the in-ear headphones, please make
sure that the volume level is set to minimum. Adju the
volume level only aer inseing the eaips. To avoid
possible hearing damage, do not use your in-ear head-
phones for extended periods of time at high volume.
• We would like to point out that too high volumes and too
long liening times can cause irreversible damage to your
hearing.
In-ear headphones can be up to 6-9 dB louder than classic
headphones because they are directly in the ear canal,
increasing the risk of hearing damage.
• If you suer from tinnitus, be mindful of liening at high
volume levels.
• Always ensure an adequate volume level. It is advisable to
keep liening times as sho as possible at high volume
levels.
• When using in-ear headphones, it is impoant to clean the
eaips, as they quickly become diy and increase the risk
of ear infection due to an increased number of germs in

english
Xelento wireless – In-Ear Headphones 5
the ear. Since the in-ear devices isolate the ear canal, a
warm and humid “climate” is created in the ear increasing
the multiplication of germs.
• Keep small pas such as product, packaging and
accessories away from children and pets. Accidental
ingeion may cause suocation.
• With the beyerdynamic MIY App you can personalise your
Bluetooth® headphones. The app’s “Statiics” function
tracks the sound pressure level that the user’s ears are
exposed to over time. This feature refers only to the sound
pressure created by the headphone’s built-in loudspeakers,
not from external sound sources.
• In-ear headphones draically reduce perception of
external sounds. Using headphones in road traic can be
potentially dangerous. The user’s hearing mu not be
impaired to the extent that it causes road safety risks,
especially utilising within an area of potentially dangerous
machinery and tools.
• Fuhermore, avoid using headphones in situations where
hearing mu not be aected, especially when crossing a
railway crossing or at a conruction site.
Changed acouic perception
• For many people, wearing in-ear headphones needs
getting used to, because acouic perception of their own
voice and of the body as well as inner ear sounds which
occur while walking dier from the “normal” situation
without in-ear headphones. However, this initially range
sensation usually diminishes aer wearing them for a
while.
Lia ility / intended use
• Do not use the product for any application which is not
describe in this product information. beyerdynamic is not
liable for improper use of the product and its accessories.

Xelento wireless – In-Ear Headphones
6
• beyerdynamic is not liable for damage to USB devices that
do not comply with USB specifications.
• beyerdynamic is not liable for damages resulting from
transmission breakdowns due to empty or old batteries or
exceeding the Bluetooth® transmission range.
• Please observe the respective country-specific regulations
before using the product.
Xelento wireless (Order # 717.959)
Box contents
• Xelento wireless In-Ear Headphones,
le and right earphones
• Bluetooth®connection cable with remote control
• Jack connection cable with remote control,
4-pole Jack 3.5 mm
• Charging cable USB-A to micro-USB
• Seven pairs of silicone eaips
• Three pairs of foam eaips (type Comply™ Tx-500)
• Cable clip for faening the cable to clothes
• Cable clip for faening the rechargeable battery to
clothes
• Storage case
• One pair of spare protective grids
• Quick Sta Guide
Connecting Ca le Xelento wireless (Order # 718.416)
Box contents
• Bluetooth®connection cable with remote control
• Cable clip for faening the rechargeable battery to
clothes
• Charging cable USB-A to micro-USB

english
Xelento wireless – In-Ear Headphones 7
eyerdynamic MIY app
The beyerdynamic MIY app is an
evolving tool to add useful features
to your Xelento wireless head-
phones such as MOSAYC sound
personalization, audio tracking
atiics and many more settings
to adapt the headphones to your
individual needs.
When using the MOSAYC sound
personalization, you will notice
your Xelento wireless will sound
even better.
Connection and ca le replacement
To detach or faen the cable, hold Xelento wireless by the
earphone housing and by the plug connector. Do not pull the
cable directly; you might damage the cable or the ear-
phones!
The right-hand side is marked by a raised dot on the ear-
phone housing and on the cable end.
Disconnect cable

Xelento wireless – In-Ear Headphones
8
Connect cable
Selecting the right eaips
For an optimal comfo in wearing, detail is very impoant
with the Xelento. To achieve this we measured and analysed
a large number of ears and auditory canals. Based on this
data, we have created ergonomically shaped eaips for the
Xelento, which correspond to the oval shape of the ear canal
and therefore are paicularly comfoable to wear. Our
silicone eaips are made of a special so material
exclusively for the Xelento series.
As each ear canal is unique Xelento wireless is supplied with
a total of ten pairs of eaips in dierent sizes (seven of
silicone, three of Comply™ foam type Tx-500) to ensure a
peect fit for each ear. This is not only essential for a good
ambient noise attenuation, but also for the be possible
development of sound.

english
Xelento wireless – In-Ear Headphones 9
Please take your time to try dierent sizes and to find out
which size fits you e - it is woh it!
We recommend that you use size M fir. Due to anatomical
conditions it can be that you need dierent sizes for the le
and the right ear. When in doubt, use a smaller size so that
the Xelento sits as deep as possible in the ear canal.
You will recognise the peect fit with the Xelento sitting
securely in the ear canal even during movement and y
providing a good am ient noise attenuation so that you can
enjoy a poweul ass response.
2x each:
The sizes from XS to 3XL are marked on the back of the
silicone eaips.
Silicone eaips
XS SML XL XXL 3XL
XS SM LXL XXL 3XL

Xelento wireless – In-Ear Headphones
10 Xelento wireless – In-Ear Headphones 10
7
3
• Please make sure to attach the silicone eaips to the
housing with the longer end of the eaip next to the
housing. The oval opening of the eaips corresponds to
the oval shape of the housing.
Comply™ foam eaips
• Firmly roll the eaip
attached to the earphone
lengthwise between your
fingers.
2x each:
• Pull the ear slightly upwards with one hand, carefully
inse the earphone with the rolled eaip into the ear
canal with your other hand.
• Hold the earphone with your finger until the shape of the
eaip adapts to your ear canal and sits comfoably.
SM L

english
Xelento wireless – In-Ear Headphones 11
english
Xelento wireless – In-Ear Headphones 11
If you want to remove the
Comply™ foam eaips, firmly
press them together and pull
them from the housing with a
slight rotating movement.
Inseing and wearing
Xelento wireless
Due to the anatomical shape of the
earphone housing, the cable of the
Xelento wireless is guided behind
the ear when inseing Xelento
wireless. See adjacent drawing.
This method of wearing the ear-
phones suppresses cable noise
eectively and even when the cable
is pulled the earphones sit firmly in
the ear.
Please make sure that the cable is
conducted upward.
Only in this way is it possible to wear
the earphones correctly and com-
foably.
The right-hand earphone housing
and cable end each have a small
raised dot to mark the right-hand
side.

Xelento wireless – In-Ear Headphones
12
Operating elements



 Increase volume
 Multifunction button
 Reduce volume
 LED
 Microphone
 Aluminium cap
 USB connection




remote control rechargeable
battery pack
Turning on / o
The functions lied below refer to the use with the Bluetooth®
connecting cable.
•Turning on
Press multifunction button  for 2 seconds.
•Turning o
Press multifunction button  for 6 seconds.

english
Xelento wireless – In-Ear Headphones 13
Firmware and Updates
Please note that the following descriptions refer to the
andard settings as supplied with firmware version 1.0.
It is possible that a newer firmware version is available.
You can update this yourself if necessary.
• Download the late firmware version onto your
computer from the Xelento wireless product page at
www.beyerdynamic.com.
• Switch on the Bluetooth®connection cable and connect
it to your computer via the USB po  with the USB
charging cable. (You can leave the earphones
connected.)
• Sta the update tool and follow the inructions on the
screen.
Compati ility information
The Xelento wireless Bluetooth®connection cable is
compatible with Bluetooth®devices which suppo the
following profiles:
• A2DP (for audio transmission)
• HFP (for telephony)
• HSP (voice output)
• AVRCP (for the transmission of control signals)
Note:
The associated functions are only available if they are
suppoed by the player.

Xelento wireless – In-Ear Headphones
14
Suppoed audio codecs
Within the A2DP profile, the Xelento wireless suppos the SBC,
AAC, aptX™ and aptX™ HD audio codecs. aptX™ HD provides
the be audio quality.
Note:
Please note that only codecs which are also available on the
player can be used for audio transmission.
The player and Xelento wireless automatically select the be
codec available on both devices.
Note:
Please note that mo players do not display which codec is
in use.
Pairing with the player
Before you use the Xelento wireless for the fir time, you have
to pair it with your mobile phone or another device with
Bluetooth®. The pairing process may be dierent with various
players. Please refer to the appropriate manual of the player.
• When the Xelento wireless is turned o, press the
multifunction button for 6 seconds to a the
Bluetooth®mode (the LED  of the remote control will
slowly flash blue and red in turns).
• Activate the Bluetooth®function on your player and, if
necessary, search for new devices.

english
Xelento wireless – In-Ear Headphones 15
• Select “beyerdynamic Xelento wireless” under the
available devices in the Bluetooth®menu of your player
and pair both devices. When in range, both devices are
paired automatically each time you turn them on.



Alternatively, you can pair the Xelento wireless with an NFC-
enabled player via NFC. Please note that the Xelento wireless
mu e turned on.
• Activate the NFC function in your player so that all
necessary information can be transferred to the player
and pairing can be eablished.
• Hold the player closely over the rear of the remote control
of the Xelento wireless.
• Now both devices will automatically be paired.
Pairing and clearing the li of players
If there are already several players in the li of your Xelento
wireless and your Xelento wireless cannot be paired with
another new player, the li is full and should be cleared so
that the new player can be added.
This is how to clear the li:
• Hold down the button  of the turned o Xelento wireless
for more than 10 seconds, so that the Xelento wireless will
switch into the pairing mode and clear the li of players
simultaneously.

Xelento wireless – In-Ear Headphones
16
Multi-point operation
The Xelento wireless can be paired with up to 8 devices with
Bluetooth®. Active connections can be eablished with up to
two devices at a time. However, playback of music and
phone operation is only possible with one device at a time.
Phone operation has priority over playback of music; i. e.
playback of music is interrupted during phone calls.
The following priorities apply during the use of playback
devices PD:
Priority Profile Play ack device
(PD)
1 HFP (phone operation) PD 1 (device used
fir)
2 HFP (phone operation) PD 2 (device used
second)
3 A2DP (playback of music) PD 1 (device used
fir)
4 A2DP (playback of music) PD 2 (device used
second)

english
Xelento wireless – In-Ear Headphones 17
Setting up multi-point
• Pair the Xelento wireless with the fir device (refer to
“pairing with the player”).
• Deactivate the Bluetooth®connection on the fir device.
• Switch the Xelento wireless o.
• Press the button for 6 seconds to a pairing mode
(LED flashes slowly alternating blue and red).
• Pair the Xelento wireless with the second device (refer to
“pairing with the player”).
• Re-activate the bluetooth connection to the fir device
that automatically connects to the Xelento wireless.
• Once both devices are paired with the Xelento wireless,
the Xelento wireless automatically connects with both
devices each time it is powered up.
Using multi-point
If you have paired the Xelento wireless with two devices
– and have ju activated media playback, briefly press
the multifunction button once to answer an incoming
call.
– and have ju hung up on a phone call, briefly press the
multifunction button once to a playing the media
which was played mo recently.

Xelento wireless – In-Ear Headphones
18
Media play ack
Please note that the functions described below, depend on
the player and the player soware and may not be
available. The Xelento wireless only transmits control signals
that comply with the Bluetooth®andard.
•Sta / stop media playback:
Briefly press the multifunction button  once.
•Play next track:
Briefly press the multifunction button  twice.
•Play previous track:
Briefly press the multifunction button  three times.
•Fast forward:
Briefly press the multifunction button  twice and hold it
down aer the second press.
•Rewind:
Briefly press the multifunction button  three times and
hold it down aer the third press.
•Increase volume:
Press the (+) button . An acouic signal indicates the
achieved maximum.
•Reduce volume:
Press the (-) button . An acouic signal indicates the
achieved minimum.



english
Xelento wireless – In-Ear Headphones 19
Call personal assiant
•To call the personal assistant on your smaphone or
tablet such as Siri,Google Assistant etc.:
Press the multifunction button  for 2 seconds.
Call control
•Accept / end a call:
Briefly press the multifunction button .
•Re ect a call:
Press the multifunction button  for 2 seconds.
•Increase call volume:
Press the (+) button .
•Reduce call volume:
Press the (-) button .
•Toggle between two callers.
Press the multifunction button  twice.
 
 

Xelento wireless – In-Ear Headphones
20
Charging
• By slightly turning, pull the alu-
minium cap of the battery
pack in the direction of the
cable to access the USB
connector .
• Connect the Xelento wireless to
any USB-compliant, voltage-
carrying USB connector (such as
a USB power supply) by using
the supplied USB charging
cable.
• During charging the LED  of the
remote control slowly flashes
red. As soon as the LED  is
permanently red, the battery is
fully charged.
• Aer charging, remove the USB
charging cable and cover the
USB connector  with the
aluminium cap.


