Big League Lawns CheckMate Lawn Striping Kit User manual

1125 Mak Tech Dr C Lansing, MI 48906 800.411.0150
www.bigleaguelawns.com
CheckMate™ Lawn Striping Kit For Ferris FW25 Installation Guide
Important
Big League Lawns, LLC warrants their products to be free of defects in material and workmanship.
This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear,
failure to properly maintain the product or used for a purpose other than that for which it is intended.
The duration of this warranty is expressly limited to one year parts and labor beginning from the date
of delivery to the original customer.
The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option,
at its factory or authorized repair agent of any part that should prove deficient. Purchaser must
maintain the product under normal operating conditions at all times. Prior to operation, become
familiar with the attachment and any disconnect features. This product is not intended to be used in a
transport position or to be backed over curbs. When not in use, the product should be removed from
the mower and transported in a safe manner. Failure to follow these instructions will void the
warranty.

Mounting Instructions
Ferris FW25 Series Mowers
Congratulations on your new purchase! You are just steps away from creating a beautifully
patterned lawn using your new CheckMate™ lawn striping roller. To ensure a long life of both
your mower and roller, please be sure to follow the mounting recommendations below.
Tools Required:
US Patent 6,962,039 B2, US Patent 6,993,894 B2
1/2” Wrench
1/4” Allen Wrench

Directions
Unit is shipped with two 3/8" to 3/8" Coupler Nuts. To install, you must
reverse the noted bolt (circled) on each side of your mower so that the
threads point outward towards the tires.
You will then re-secure the bolt by attaching the 3/8" coupler nut. The
opposite end of the coupler nut will have the 3/8" threads necessary to
connect the CheckMate™. This allows for a no drill application.
Sample Coupling Process
(1) Acquire Hole
(2) Install bolt
(3) Add lock washer
(4) Tighten coupler nut
(5) Thread pivot bolt
(6) Tighten pivot bolt