Big League Lawns CheckMate Kubota W Walk-Behind Series User manual

1125 Mac Tech Dr C - Lansing, MI 48906 800.411.0150
www.bigleaguelawns.com
CheckMate™ Kubota® W Walk-Behind Series Lawn Striping Kit Installation
Guide
Important
Big League Lawns, LLC warrants their products to be free of defects in material and workmanship.
This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear,
failure to properly maintain the product or used for a purpose other than that for which it is intended.
The duration of this warranty is expressly limited to one year parts and labor beginning from the date
of delivery to the original customer.
The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option,
at its factory or authorized repair agent of any part that should prove deficient. Purchaser must
maintain the product under normal operating conditions at all times. Prior to operation, become
familiar with the attachment and any disconnect features. This product is not intended to be used in a
transport position or to be backed over curbs. When not in use, the product should be removed from
the mower and transported in a safe manner. Failure to follow these instructions will void the
warranty.

US Patent 6,962,039 B2, US Patent 6,993,894 B2
Congratulations on your new purchase! You are just steps away from creating a beautifully
patterned lawn using your new CheckMate™ lawn striping roller. To ensure a long life of both
your mower and roller, please be sure to follow the mounting recommendations within this
packet.!
If you should have any questions regarding the use of a particular mounting method, please do
not hesitate to contact us at 800.411.0150 or via email at [email protected].
Important: If you purchased your striping kit through a 3rd party vendor and have any
questions regarding your mounting options, please do not hesitate to contact us. We have a
great wealth of knowledge, tips and tricks, which may be helpful. Unfortunately, when we
receive purchase orders via 3rd party vendors we do not know in advance what mower the roller
is being attached to.
Thank you,
Big League Lawns, LLC
When Mowing Isn’t Enough… Let it Roll!
US Patent 6,962,039 B2
US Patent 6,993,894 B2
FEIN 38-3198349
Big League Lawns, LLC
1125 Mac Tech Dr C - Lansing, MI 48906
800.411.0150

US Patent 6,962,039 B2, US Patent 6,993,894 B2
Mounting Option B
Important: Only the 3/8” threaded portion of your pivot bolt threads pass through the
mower frame. If you are mounting to an oversize hole, please place a 3/8” flat washer
on the pivot bolt threads to prevent the smooth portion of this bolt from passing
through your frame.!
Scan the second QR code on the page included with your shipment to view a
mounting arm installation tutorial.!
Big League Lawns, LLC
1125 Mac Tech Dr C - Lansing, MI 48906
800.411.0150

US Patent 6,962,039 B2, US Patent 6,993,894 B2
Important: Only the 3/8” threaded portion of the pivot bolt threads pass through
your mower frame.
DRILL: Your 3/8” mounting holes will be drilled at the marked location on the
schematic below (on each side of your mower).!
INSTALL: Next, you will bolt your now assembled mounting arms to your mower frame.!
It’s best to install your mounting arms (seen in the Mounting Option B section of this
packet) to your frame prior to connecting them to your striping rollers gray channel/
cross member. This will make installation much easier as you will know exactly how
wide your arms need to be installed onto your striper, in addition, you won’t be fighting
the weight of the striper throughout the process.!
Once fully installed, simply lift your striper up to make sure it isn’t impeded in anyway.!
!
Installation is now complete! Enjoy your striping with your new CheckMate ™ Striping kit!
Big League Lawns, LLC
1125 Mac Tech Dr C - Lansing, MI 48906
800.411.0150