Big League Lawns CheckMate Dixie Chopper Stryker User manual

1161 E. Clark Road, Suite #220 DeWitt, MI 48820 800.411.0150
www.bigleaguelawns.com
CheckMate™ Dixie Chopper Stryker Lawn Striping Kit Installation Guide
Important
Big League Lawns, LLC warrants their products to be free of defects in material and workmanship.
This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear,
failure to properly maintain the product or used for a purpose other than that for which it is intended.
The duration of this warranty is expressly limited to one year parts and labor beginning from the date
of delivery to the original customer.
The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option,
at its factory or authorized repair agent of any part that should prove deficient. Purchaser must
maintain the product under normal operating conditions at all times. Prior to operation, become
familiar with the attachment and any disconnect features. This product is not intended to be used in a
transport position or to be backed over curbs. When not in use, the product should be removed from
the mower and transported in a safe manner. Failure to follow these instructions will void the
warranty.

US Patent 6,962,039 B2, US Patent 6,993,894 B2
Congratulations on your new purchase! You are just steps away from creating a beautifully
patterned lawn using your new CheckMate™ lawn striping roller. To ensure a long life of both
your mower and roller, please be sure to follow the mounting recommendations in this packet.
If you should have any questions regarding the use of a particular mounting method, please do
not hesitate to contact us at 800.411.0150 or via email at [email protected].
Important: If you purchased your striping kit through a 3rd party vendor and have any
questions regarding your mounting options, please do not hesitate to contact us. We have a
great wealth of knowledge, tips and tricks, which may be helpful. Unfortunately, when we
receive purchase orders via 3rd party vendors we do not know in advance what mower the roller
is being attached to.
Thank you,
Big League Lawns, LLC
When Mowing Isn’t Enough… Let it Roll!
US Patent 6,962,039 B2
US Patent 6,993,894 B2
FEIN 38-3198349

US Patent 6,962,039 B2, US Patent 6,993,894 B2
Mounting Option D
Important: Only the 3/8” threaded portion of your pivot bolt threads pass through the
mower frame. If you are mounting to an oversize hole, please place a 3/8” flat washer
on the pivot bolt threads to prevent the smooth portion of this bolt from passing
through your frame.

US Patent 6,962,039 B2, US Patent 6,993,894 B2
Your Dixie Chopper Stryker requires two 3/8” Holes to be drilled on each side of the
standing platform. [See photos below for reference]
Line up your Quick Release L-Brackets that have stabilizer pins pre installed and mark
your hole locations, then drill using a 3/8” drill bit.
It’s important that these holes are drilled as symmetrically as possible to insure easy on
and off quick release functionality. Stabilizer pins must be installed facing the same
direction in order to allow the striper to slide on and off of the pins.
[Note: 1. Yellow Arrows note that the quick release brackets may be reversed to accommodate
smaller CheckMate™ Striping Kits.
Green arrows indicate that gold stabilizer pins must face the same direction, left or right.
2. Per mounting option D, you will need to use 4-hole extension brackets to decrease the
angle in which the roller is mounted.]