BioMax N-UFACE302 User manual

N-UFACE302 User Manual
1. How to add new user in device?
Ans:- Menu >> Select Users >> Select Enroll >> Add User ID >> Add User Name >> Ok >> Add
Finger/Password/Card/Face.
2. How to modify existing user?
Ans:- Menu >> Select Users >> Select Modify >> Select Particular user for modify >> Ok >> ESC
>> Ok.
3. How to apply valid date for particular user?
Ans:- Menu >> Select User >> Select Modify >> Select Particular user for modify >> Ok >> Select
Valid date >> Add Start & End Date >> Yes >> ESC >> Ok.
4. How to Download All User?
Ans:- First inserted USB Drive in device then press Menu >> Select User >> Select Download &
Ok.
5. How to Upload All User?
Ans:- First inserted USB Drive in device then press Menu >> Select User >> Select Upload & Ok.
6. How to (Download/Upload) transfer all users from one device to other device?
Ans:- First inserted formatted USB Drive in device then press Menu >> User >> Download user
data and same upload into other device.
7. How to download attendance logs through USB?
Ans:- First inserted USB Drive in device then open menu >> Select Logs >> Ok >> Cancel encrypt
by pressing ESC button then logs will start downloading into USB.
8. How to set Admins limit in device?
Ans:- Menu >> Select Setting >> Select Device >> Select Admins >> Set admins quantity(0-10).

9. How to set Volume in device?
Ans:- Menu >> Select Setting >> Select Device >> Select Volume >> Set volume (0-6).
10. How to on/off keypad sound?
Ans:- Menu >> Select Setting >> Select Device >> Select Keyboard sound Yes/NO.
11. How to set Verify mode?
Ans:- Menu >> Select Setting >> Select Device >> Select Verification Mode.
12. How to set Verified image in screen?
Ans:- Menu >> Select Setting >> Select Device >> Select Verified Screen >> Set time (0-30
second).
13. How to set Logs full alert?
Ans:- Menu >> Select Setting >> Select Device >> Select AVL Logs Alert (0-1000).
14. How to set Difference between two punches in device?
Ans:- Menu >> Select Setting >> Select Device >> Set time Punch Interval (0-60 min).
15. How to set Screen saver time?
Ans:- Menu >> Select Setting >> Select Device >> Select Screen Saver >> Set time (0-1440
second).
16. How to set Sleep time?
Ans:- Menu >> Select Setting >> Select Device >> Select Sleep Time >> Set time (0-60 Minute).
17. How to set Alarm (Bell) time?
Ans:- Menu >> Select Setting >> Select Device >> Select Bell >> Set timing & buzzer count(0-60
times).

18. How to set Attendance status?
Ans:- Menu >> Select Setting >> Select Device >> Select ATND. Status-Yes >> Set Attendance
status.
19. How to set RS232 & printer settings?
Ans:- Menu >> Select Setting >> Select Device >> Select RS232 - Yes >> Select Printer Settings &
Set Baudrate and Cutter.
20. How to set Date & Time?
Ans:- Menu >> Select Setting >> Select Device >> Select Time >> Set Date & Time.
21.By Default Device Port Number?
Ans:- 5005
22. How to select LAN/WAN mode in device?
Ans:- Menu >> Select Setting >> Select Network >> Change mode LAN/WAN.
23. How to find Cloud ID?
Ans:- Menu >> Select Setting >> Select Network >> Get the Cloud ID.
24. How to change & check the IP address of device?
Ans:- Menu >> Select Setting >> Select Network >> Select ETH - Yes >> Change & Check the IP
Address.
25. How to Connect Wi-Fi?
Ans:- Menu >> Select Setting >> Select Network >> Select Wi-Fi - Yes >> Select Search >> Select
Wi-Fi router name >> Add router password >> Ok.
26. How to Connect Mobile Net?

Ans:- Menu >> Select Setting >> Select Network >> Select Mobile Not. >> Show IMEI, ICCID,
Network then select Modify >> Select New APN >> Add SIM APN name >> Username/Password
- card >> Ok.
27. How to set Server IP/Server URL & Port number?
Ans:- Menu >> Select Setting >> Select Network >> Set Server IP & Server Port.
28. How to reset device?
Ans:- Menu >> Select Setting >> Select Initial >> Select Reset Default >> Ok.
29. How to delete single employee?
Ans:- Menu >> Select User >> Select Modify >> Select Particular user >> Delete >> Ok.
30. How to delete all logs from device?
Ans:- Menu >> Select Setting >> Select Initial >> Select Delete All Logs >> Enter password(Call
Distributor or Dealer).
31. How to delete all data?
Ans:- Menu >> Select Setting >> Select Initial >> Select Delete All Data >> Enter password(Call
Distributor or Dealer).
32. How to Update Firmware?
Ans:- First inserted formatted USB Drive in device then Menu >> Select Setting >> Select Initial
>> Select Upgrade From USB >> Ok.
33. How to set Timezone for particular user? (Use Only For Access Control System)
Ans:- Menu >> Select Setting >> Select Time Setting >> Select Period >> Add particular time for
access >> Ok >> ESC >> Ok.
34. How to Assign Timezone e for particular user? (Use Only For Access Control System)

Ans:- Menu >> Select User >> Select Modify >> Select particular user >> Select User TZ >> Assign
Time zone number >> Ok >> ESC >> Ok.
35. How to set Lock unlocked time?
Ans:- Menu >> Select Setting >> Select LockCtrl >> Select Lock Delay >> Set time (1-200 Second)
>> Ok >> ESC >> Ok.
36. How to set Sensor type? (Use Only For Feedback Lock/Door Sensor)
Ans:- Menu >> Select Setting >> Select LockCtrl >> Select Sensor Type >> Select NC/NO >> Ok >>
ESC >> Ok.
37. How to set Sensor delay time? (Use Only For Feedback Lock/Door Sensor)
Ans:- Menu >> Select Setting >> Select LockCtrl >> Select Sensor Delay >> Set time (1-200
Second) >> Ok >> ESC >> Ok.
38. How to set Anti-Passback?
Ans:- Menu >> Select Setting >> Select LockCtrl >> Select Anti-Passback - Yes/No >> Ok >> ESC
>> Ok.
39. How to Close Unauthorized Action warning tone?
Ans:- Menu >> Select Setting >> Select LockCtrl >> Select Temper Alert >> Ok >> ESC >> Ok.
40. How to set Wiegand Format?
Ans:- Menu >> Select Setting >> Select LockCtrl >> Set Wiegand Format & Wiegand
Input/Output.
41. How to set Work code?
Ans:- Menu >> Select work code-Yes >> Set Work code.
42. How to find particular user logs from device?

Ans:- Menu >> Select View Info >> Select User Log >> Enter Employee ID >> Select Start & End
Date >> Ok.
43. How to check User/Logs/Fingerprint/Card/Password/Face/Admin Capacity?
Ans:- Menu >> Select View Info >> Select Reg. Info >> Get the
User/Logs/Fingerprint/Card/Password/Face/Admin Capacity.
44. How to check Serial number in device?
Ans:- Menu >> Select View Info >> Select Dev. Info >> Get the Serial Number.
45. How to check Firmware Version?
Ans:- Menu >> Select View Info >> Select Dev. Info >> Get the Firmware Version.