Bioness BITS Owner's manual

Bedside Table Configuration
Mobile Cart Configuration
BITS Supplemental Guide
Bedside & Mobile Configurations

2

3
Supplemental Guide - Bedside & Mobile Configurations
Introduction
The Bioness Integrated Therapy System (BITS) is a hardware and software platform using touchscreen technology
that allows for patient interaction with different software programs. BITS is intended to challenge and assess the
abilities of individuals, including those with deficits resulting from traumatic injuries and movement disorders as
well as competitive athletes.
The BITS Bedside Configuration consists of a Bedside Stand and an all-in-one Touchscreen PC with the BITS
software applications.
Figure 1: Bedside Configuration
Stand Base
Power Strip
Bedside Table
Power Adaptor & Power Adaptor Mount
Storage Bin
Power Cord
Power Cord Holder
Rear Handle

4
The BITS Mobile Configuration consists of a Mobile Stand with locking casters and an all-in-one Touchscreen PC
with the BITS software applications.
Figure 2: Mobile Configuration
This document outlines the installation process and Instructions For Use for the Bioness Integrated Therapy System
(BITS) Bedside & Mobile configurations. This guide also includes a part list, safety information, and installation
instructions. Please read this installation guide including all safety information, before starting the installation
process. Be sure to review this guide, including all safety information, before using the Bioness Integrated Therapy
System. If you have questions or need technical support, contact the Bioness Client Support Department at
800.211.9136, Option 3. You can also visit the Bioness website at: www.bioness.com.
Caution: Do not use the Bioness Integrated Therapy System until you have been properly trained by a
Bioness representative.
Touchscreen PC
Height Adjustment Handle
Power Adaptor & Power Adaptor Mount
Power Strip
Stand Base
Locking Casters
Height Adjustment Pedal
Storage Bin
Power Cord
Rear Handle
Power Cord Holder

5
Indications For Use
The Bioness Integrated Therapy System (BITS) is intended to challenge and assess the physical, visual, auditory,
and cognitive abilities of individuals, including those with deficits resulting from traumatic injuries and movement
disorders as well as competitive athletes.
Examples of these abilities include:
Visuomotor Coordination
Reaction Time
Visuospatial Perception
Visual & Auditory Processing
Working Memory
Physical & Cognitive Endurance
Precautions
• Parts of the installation process require two people. Do not attempt to assemble the Bioness Integrated
Therapy System alone.
•
Unauthorized modifications to the Bioness Integrated Therapy System, such as installing or uninstalling
software, will void the warranty.
• Accessing the internet or local intranet with the Bioness Integrated Therapy System will void the
warranty.
• Do not alter the Windows 8 Operating System settings by adding Windows user accounts or adjusting
the screen saver or sleep timer, as this may interfere with the functioning of the software.
• Contact Bioness Client Support Department if any component of the system is malfunctioning.
Attempts to modify the hardware will void the warranty.
• Make sure to follow the correct procedures when moving the Bedside and Mobile stands or adjusting
the height of the display screen.
• Always lock the casters on the mobile stand when the system is in a stationary position.
• Ensure the wheels on the Mobile stand are in the locked position before starting a therapy session
with a client.
• Keep the system plugged in to an electrical outlet during therapy to avoid loss of therapy due to
battery loss.
• Supervision should be provided during use of the system.
• Clients should not use an object that may damage, or is unsafe when interacting with the touchscreen.
• Use caution with patients diagnosed with, or suspected to have, epilepsy.
• Avoid physical contact with other users when more than one user is interacting with the system
simultaneously.

6
Warnings
• Do not move the Bioness Integrated Therapy System over obstacles on the floor or over uneven or soft
surfaces. Doing so could cause the equipment to fall causing damage and/or injury.
• Do not use the Bioness Integrated Therapy System near strong electromagnetic fields (e.g. MRI).
• To avoid the potential of electrical shock do not use the Bioness Integrated Therapy System near water.
• Users of the Bioness Integrated Therapy System should exercise caution to prevent tripping hazards
during the course of therapy. Sources of such tripping hazards include power cables and the legs or
base of the Bedside and Mobile Stands.
• Do not attach or place objects of excessive weight on the Bedside or Mobile Stands as doing so may
cause tipping.
• Stored Energy Hazard: The lift mechanism in the Bedside and Mobile Stands are under tension and
may move rapidly when the Touchscreen PC is not attached. Please exercise caution when making
height adjustments when the Touchscreen PC is not mounted to the stand.
• The equipment must only be connected to an earthed MAINS socket outlet (i.e. only plug the Bioness
Integrated Therapy System into 3 pronged grounded wall outlets). Not doing so may result in an
increased risk of electric shock.
• Misuse of the system could cause the unit to fall and result in injury and/or damage.
• Do not climb, sit, or lean on any part of the portable display stand, as doing so could cause the
equipment to fall causing damage and/or injury.
• Do not allow the patient to strike or hit the Touchscreen PC with excessive force.
• The Bioness Integrated Therapy System software programs utilize moving and rotating graphics that
may cause dizziness, vertigo, or nausea in sensitive patients. Individuals experiencing dizziness,
vertigo, or nausea while using BITS should discontinue use immediately.
• Improper shut-down of the BITS software may result in the loss of client data. Please follow proper
instructions for the shut down process.
• Do not use unapproved devices/hardware with the Bioness Integrated Therapy System.
• Do not use unapproved accessories with the Bioness Integrated Therapy System.
• Refer to the manufacturer’s instructions provided with the Touchscreen PC for additional warnings and
safety information.

7
BITS Bedside & Mobile Configurations Component List
The components for the BITS product consists of two different kits: The Hardware Kit and the Computer Kit. Do
not start the installation process until both kits have been received.
BITS Bedside Configuration Hardware Kit: 117-00207-001
Description Illustration (Reference Only) Quantity
Bedside Stand with attached
articulating arm and VESA
mount and accessory bin
1
Power Adapter Mount 1
Power Strip with Coiled Cord 1

8
BITS Mobile Configuration Hardware Kit: 117-00208-001
Description Illustration (Reference Only) Quantity
Mobile Stand with attached
articulating arm and VESA
mount and accessory bin
1
Power Adapter Mount 1
Power Strip with Coiled Cord 1

9
BITS Bedside & Mobile Configuration Computer Kits: 709-00215-000 & 709-00215-001
Description Illustration (Reference Only) Quantity
Cybernet All-in-One
Touchscreen PC 1
Power Adapter Mount 1
BITS License Key
(contained in a box) 1
Encrypted Backup Drive
(contained in a box) 1
Zip Ties 2
Mounting Bases 2
Touchscreen Stylus 1
BITS Bedside & Mobile
Supplemental Guide
612-00848-001
No Image 1
Note: Verify that all components have been received. Do not start the installation process if any of the
listed components are missing. For technical support contact Bioness Client Support Department at
800.211.9136, Option 3 or your Bioness Sales Representative.

10

11
Tools Needed for Installation
The list below includes items needed to install the BITS. The tools are not provided with the system.
• 3/4” Socket Wrench
• 1/2” Socket Wrench
• 13 mm Wrench
• 1/8” Allen Wrench
• 5/32” Allen Wrench
• Phillips Screw Driver
• Box Cutter with Safety Guard
• Scissors
Touchscreen PC Installation
1. Carefully remove the Touchscreen PC from the box and remove the foam packaging.
2. Use the foam sleeve to protect the surface of the Touchscreen, and lay the Touchscreen PC face down on
a flat surface. See Figure 2.
Figure 2: Back Side of the Touchscreen PC
3. Remove the two bottom Mounting Screws, and loosen the two top Mounting Screws on the mounting
surface on the back of the Touchscreen PC. See Figure 3.
Figure 3: Location of Mounting Screws
Mounting Screws
Remove Screws
Loosen Screws

12
4. Slide the top Mounting Screws into the slots on the top of the VESA Mounting Plate on the Variable Height
Arm. See Figure 4.
Figure 4: Top Mounting Screws Inserted into VESA Mounting Plate.
Caution: The Variable Height Arm is designed to dynamically support the weight of the Touchscreen PC.
The arm may move down as the weight of the Touchscreen PC is transferred to it. Use caution, and perform
Step 4 slowly.
5. Replace the Mounting Screws on bottom of the VESA Mount, and tighten all four screws. See Figure 5.
Figure 5: Installed Touchscreen PC on VESA Mount

13
Touchscreen Mount Adjustment
1. To adjust the CW and CCW rotational tension, use a 13 mm wrench to adjust the hex nut on the back of the
VESA Mount. See Figure 6.
Figure 6: Rotational Tension Adjustment
1. To adjust the forward and backward tilting tension, use a 5/32” allen wrench adjust the bolt on the VESA
Mount. See Figure 7.
Figure 7: Tilting Tension Adjustment
1. To adjust the left and right rotational tension, remove the cap covering the hex nut on the back of the VESA
mount, and use a 1/2” socket wrench to adjust the hex nut. See Figure 8.
Figure 8: Left/Right Rotational Adjustment

14
Bedside Configuration Installation Instructions
Cable Management
1. Remove the protective cover below the Horizontal Extension Arm near the Variable Height Column.
See Figure 9.
Figure 9: Remove Protective Cover
2. Thread the Power Cord through the space between the Bedside Table and the Variable Height Column.
See Figure 10.
Figure 10: Thread the Power Cord
3. Remove the Cable Management Cover from the bottom of the Horizontal Extension Arm.

15
4. Thread the Power Cord through the Cable Management Cover, and reattach it to the bottom of the
Horizontal Extension Arm. See Figure 11.
Figure 11: Reattach the Cable Management Cover
5. Insert the Power Cord in the Cable Clip on the bottom of the Variable Height Arm. See Figure 12.
Figure 12: Cable Clip
6. Wrap the Power Cord around the side of the Variable Height Arm where it meets the VESA Mount.
See Figure 13.
Figure 13: Wrapping the Power Cord

16
7. Plug the Power Cord into the power connection on the left side of the Touchscreen PC.
8. Secure the Power Cord to the back of the Touchscreen PC using a Zip Tie and Mounting base provided in
the Computer Kit. See Figure 14.
Figure 14: Secure the Power Cord
9. Trim the Zip Tie using a pair of scissors.
Caution: When trimming the Zip Tie, take care to avoid cutting or otherwise damaging the Power Cord.
Power Adapter Installation
1. Position the Power Adapter on the Power Adapter Mount. See Figure 15.
Figure 15: Power Adapter Mount
2. Plug the Power Cable into the Power Adapter.
3. Plug the Power Cord into the Power Strip, and secure the excess cable with the straps on the Power
Adapter Mount. See Figure 16.

17
Figure 16: Secure the Power Cord
4. Secure the Coiled Power Cord from the Power Strip on the Power Cord Holder of the Tower. See Figure 17.
Figure 17: Power Cord Holder
Moving the BITS Bedside Stand
Caution: The BITS Computer is equipped with an internal battery. Make sure the system is plugged in while
not in use to ensure the battery is sufficiently charged during use.
1. Disconnect the power cord from the wall socket and secure it on the power cord holder.
2. While standing to the rear of the Bedside Stand, lower the Bedside Table by pressing the Release Buttons
on the bottom of the table with both hands.
3. Lower the Bedside Table to the lowest position on the tower of the Beside stand.
4. Lower the Touchscreen PC to the surface of the Bedside Table. See Figure 18.

18
Figure 18: Correct Position for Moving Mobile Stand
5. Grasp the Rear Handle with both hands, and push the Bedside Stand from behind.
6. Move the stand to the new location.
7. Reposition the Touchscreen to the desired height.
8. Reconnect the power cord to the wall socket.
Mobile Configuration Installation Instructions
Power Adapter Installation
1. Position the Power Adapter on the Power Adapter Mount. See Figure 19.
Figure 19: Power Adapter Mount
Release Buttons
Rear Handle

19
2. Plug the Power Cable into the Power Adapter.
3. Plug the Power Cord into the Power Strip, and secure the excess cable with the straps on the Power
Adapter Mount. See Figure 20.
Figure 20: Final Configuration
4. Secure the Coiled Power Cord from the Power Strip on the Power Cord Holder of the Tower. See Figure 21.
Figure 21: Power Cord Holder

20
Cable Management
1. Wrap the Power Cord around the Variable Height Arm. See Figure 22.
Figure 22: Wrapping the Power Cord
2. Insert the Power Cord in the Cable Clip on the bottom of the Variable Height Arm. See Figure 23.
Figure 23: Cable Clip
3. Wrap the Power Cord around the side of the Variable Height Arm where it meets the VESA Mount.
See Figure 24.
Figure 24: Wrapping the Power Cord