Bioness Ness H200 Parts list manual

Clinician's Reference Card
Fitting the H200 Wireless Orthosis
Rx Only (US Only)
1
3
2
5
4
6
7
8
9
10
Select the appropriate Orthosis size and then attach the appropriate Thenar.
Attach the appropriate Wrist Insert.
Don the Orthosis and check between the FPL #5 electrode and the wrist. If there is a gap,
attach and tighten the Orthosis Wrist Strap.
If there is still a gap, doff the Orthosis and attach the FPL Panel.
Select and attach an Extensor Fitting Panel that will elicit the desired hand/finger movement.
Start with fitting panel A.
Select and attach a Flexor Fitting Panel that will elicit the desired hand/finger movement.
Start with fitting panel A.
Wet all of the cloth electrodes.
Attach the cloth electrodes to the electrode bases.
Don the Orthosis.
Adjust stimulation parameters.
612-00373-001 Rev. D
11/2015
Adjusting Stimulation Parameters
1
3
2
Log into the H200 Wireless Software. Select a patient record and press Open, or press New
to create a patient record.
From the Programs Menu, press Stim. Parameters.
Adjust stimulation parameters for the extensors and flexors. Press Start to turn on
stimulation. Press Stop to stop stimulation. Deactivate the trigger button on the Orthosis, if
appropriate. Press Done to return to the Programs menu.
321
Deactivate Remote
Trigger
1
Thenar
4FPL Panel 5
Extensor Fitting Panel
7 9
810
6
Flexor Fitting
Panel
3
Wrist Strap
Wrist Insert
2
For a complete list of all contraindications, warnings, adverse reactions, precautions, and care instructions please review the
Clinician’s Guide found at www.bioness.com.
See
Clinician's
Guide

1. Turn off the H200 Wireless Control Unit. Press and hold the
Minus button. Briefly press the On/Off button. The
stimulation intensity level and program letter "A" will alternate
in the digital display.
2. Press the program selection buttons on the side of the Control
Unit to select clinical programs A–G.
3. Press the Trigger button to turn on/off stimulation.
4. Press the On/Off button to exit clinical mode.
Worldwide Corporate Office
Bioness Inc.
25103 Rye Canyon Loop
Valencia, CA 91355
Telephone: [phone] or 661-211-9136
Email: [email protected]
Website: www.bioness.com
Manufactured by:
Bioness Neuromodulation Ltd.
8 Hanagar St.
Hod Hasharon 4501309
Israel
European Authorized Representative
Bioness Europe B.V.
Stationsweg 41
3331 LR Zwijndrecht, The Netherlands
Telephone: [phone]
Email: [email protected]
Website: www.bioness.com
Adjusting Program Settings
From the Programs Menu, press Program Settings.
From the Program Settings window, select a program. The program window will open.
For Functional Training and Motor Neuromodulation Programs, adjust the program settings
and press Start to turn on stimulation. Press Stop to turn off stimulation.
For Neuroprosthesis Programs, adjust the program settings and press Trigger to turn
on stimulation. When ready, press Trigger a second time to initiate the next phase of the
program. Press Stop to turn off stimulation.
1
3
4
2
32
1
Assigning User Programs to Control Unit Buttons 1 and 2
Using Clinical Mode
From the Programs menu, press Modify or Modify to open the Assign to Button 1 or
Assign to Button 2 window.
Select a program from the program list, press Edit to modify the program settings and/or
press Done to assign the program.
To create and assign a Personal Custom Program, select Personal Custom and press Edit.
Add, delete, edit, and/or reorder program segments as desired. Adjust segment duration and
total duration, and then press Done.
1
3
2
321
4
Program Selection Buttons
NESS®, NESS H200® Wireless, Bioness, the Bioness Logo® and LiveOn® are registered trademarks of Bioness Inc. in the United States or other countries. | www.bioness.com
1
3
4
2
© 2015