Bionet CardioXP User manual

1/106
Version 1.2
CardioXP Operation Manual
CardioXP
Operation Manual
Ver. 1.2

2/106
Version 1.2
CardioXP Operation Manual
Warranty
-This product was made through strict quality control and examination. The
repair and compensation standards follow the consumer damage
compensation regulations of the Ministry of Finance and Economy.
-The warranty for this product runs for 1 year. (2 years in EU) But the warranty
for accessory runs for 6 months.
-This product is guaranteed against faulty workmanship for a period of 1 year.
Under this warranty, we undertake to repair free of charge at our service
centers.
-When having troubles during this period, please inform us the model name,
serial number, date of purchase and a description of the problem you are
experiencing.
Caution
Federal law restricts this device to sale by or on the order of a physician

3/106
Version 1.2
CardioXP Operation Manual
Contact Bionet
Contact Us If you have any questions or comments relating to our
products or purchasing, please contact the telephone
numbers or E-mail below. You can talk to our sales
people. Bionet always welcome your enquiries. Please
contact us.
Product and purchasing TEL: [phone]
After sales service TEL: [phone]
※When the product is not operating correctly, please
contact our customer service center with the name of
the model, serial number, and a description of the
problem you are experiencing.
Product purchase
and accessory
order
Please contact us or retailer for the information about
product purchase or accessory order.
TEL: [phone] / E-mail: [email protected]
Technical
assistance Please contact this number for technical assistance.
TEL: [phone] / E-mail: [email protected]

4/106
Version 1.2
CardioXP Operation Manual
Fee-based Service
If you wish to make a claim when the product is damaged through misuse, we
charge repair fee. Please read the manual before you make a claim.
- For simple inspection without giving instruction
or disassembling the product
- For reinstalling due to poor installation by the
retailer
Fee charged: From the
second time
Free of charge: One time
- For poor installation due to moving
- For reinstallation after initial installation due to
customer’s require
- For reinstallation due to customer’s unskilled
installation
- For offering service when a foreign substance
is put or mis-cleaned by the customer
Fee charged
1. The warranty does not cover cleaning, adjusting and instruction for use.
(Separate standard will apply when repair is impossible)
2. A fault of customer
When the product is damaged or broken due to customer’s improper use or
misuse
- When the power cord is replaced improperly by the user
- When the user drops the product while moving, after the initial installation
- When the user uses unauthorized accessories
- When the product is repaired by unauthorized person
3. Others
- When the product is damaged by a natural disaster (fire, flood or earthquake)
- When durability of accessories ends

5/106
Version 1.2
CardioXP Operation Manual
Definition of WARNING, CAUTIONS and NOTE
In order to stress the contents of this manual, we define the terms as
below. Please follow the warning and cautions instruction.
The manufacturer or service agents are not responsible for the damage
resulting from inappropriate use or carelessness.
WARNING
There might be serious injury, fatal accident or financial damage when you
violate this instruction
CAUTIONS
There might be slight injury or damage when you violate this instruction
NOTE
There might not be any dangerous events, but it is important to note this
instruction for installation, use, maintenance or repair

6/106
Version 1.2
CardioXP Operation Manual
Environment Instructions
Please do NOT use of place the product in such an environment explained
below.
Steamy environment.
Do not use the
product with wet
hands.
Direct sunlight.
Place where the
temperature and
humidity condition
are extreme
(Recommended
temperature and
humidity range
for use are
10~40C and 30~85%,
respectively.)
Near electronic
heaters
High humidity or
ill-ventilated place
Place where
excessive shock
or vibration
may occur
Place exposed to
chemicals or
explosive gas.
Please note there is
no dust or metal in
the product.
Do not disassemble
the product.
The product warranty
does not cover
problems resulting
from disassembling
the product.
Do not plug the
power supply cord
before installing
the product
completely. It may
cause damage on
the product.

7/106
Version 1.2
CardioXP Operation Manual
Safety Instructions for electricity
Please note the following precautions before using the product.
•Is the power supply cord proper? (100 - 240V AC)
•Is every cord connected properly to the product?
•Is the grounding connected correctly? (Otherwise, noise can occur.)
NOTE
In order to avoid noise, do not place the product near a power generator,
X-ray equipment, broadcast equipment or mobile electric cord. It may
cause inaccurate result. It is important to use an independent electric
circuit and stable grounding. When using with other appliances together
with an outlet, the result may be inaccurate.
NOTE
The classification of CardioXP is as below.
Its classification against electric shocks is Class Ⅰ, Type-CF.
It is not proper to use this product near an inflammable anesthetic or a
solvent.
IEC/EN 60601-1(Safety of Electric Medical Equipment) standard, Noise
events: A class & IEC/EN60601-1-2(Electromagnetic Compatibility
Requirements) standard, Noise level: B
IEC/EN60601-2-25(Safety of Electrocardiograms), UL2601-1(US General
Requirements for Safety)
NOTE
Diagnosis of CardioXP needs to be confirmed by medical specialists.
NOTE
The accessories connected to analog or digital connector should be
authorized in accordance with IEC standards. (E.g. IEC 950 for data
processing equipment and IEC 601-1 for medical equipment) Moreover,
every composition should correspond with EN 60601-1:1993.
WARNING
This equipment must only be connected to a supply mains with protective earth.
WARNING
Do not touch accessible connector pins and the patient simultaneously

8/106
Version 1.2
CardioXP Operation Manual
Safety Symbols
Symbols Contents
Isolated patient connection. (IEC 601-1-Type CF)
ECG Signal Input Port
This symbol identifies a safety note. Ensure you understand
the function of this control before using it. Control function is
described in the appreciate operation manual.
Conductor provides a connection between equipment
and the potential equalization bus bar of the electrical
installation
~AC Power
External Signal IN/OUT Port
External Signal Video Port
External Signal Ethernet Port
External Signal USB Port

9/106
Version 1.2
CardioXP Operation Manual
Contents
1. General Information …………………………………………………….....12
1) Overviews of the product ……………………………………………….13
2) Characteristics of the product .………………………………………..14
3) Components of the product ……………………………………………15
Basic components and accessories ……………………………………….15
Options …………………………………………………………………………….16
Main components ………………………………………………………………17
Patient signal module ………………………………………………………….21
Graphic display LCD …………………………………………………………...24
Control panel …………………………………………………………………….26
4) System Installation .......................................... ……………………27
Precautions for installation ……………………………………………………27
Connecting power supply …………………………………………………….29
Connecting patient signal module …………………………………………30
Connecting wire mode …………………………………………………..30
Connecting wireless mode………………………………………………30
Installing the recording paper ..……………………………………………..32
5) System Setting ................................................. ……………………33
Setting Initialization ……………………………………………………………..33
6) System Starting ................................................ ……………………34
2. ECG Recording ................................................... …………………..37
1) Location of electrodes ……………………………………………………38
2) Connecting electrodes …………………………………………………..39
Connecting patient cable …………………………………………………….39
How to attach the electrodes ………………………………………………..39
Trouble shooting for lead connection ……………………………………..40
3) Starting ECG recording ……………………………………………………41
4) Basic Setting .................................................….……………………42

10/106
Version 1.2
CardioXP Operation Manual
General information ……………………………………………………………42
Patient information ……………………………………………………………..44
Printing speed setting ………………………………………………………….47
Signal gain setting ……………………………………………………………...47
Display setting …….…………………………………………………………….48
Filter setting …….………………………………………………………………..52
Printing channel setting …….…………………………………………………54
5) Display Form …………………………………………………………………58
6) Monitoring Form …………………………………………………………….59
7) Recording Form …………………………………………………………….60
10-Second ECG recording …….……………………………………………60
60- Second ECG recording …….…………………………………………...61
8) Printing Form …………………………………………………………………62
9) Copy …………………………………………………………………………..69
10) System Setup ………………………………………………………………71
Basic Setup…….………………………………………………………………..71
Network Setup …….……………………………………………………………78
Hospital Setup …….……………………………………………………………79
Record Setup …….…………………………………………………………….79
3. ECG file management ........................................ …………………..84
1) Display and function …….………………………………………………..85
2) Data printing ………………………………………………………………...86
3) Patient information page …………………………………………………86
4) Data deleting ………………………………………………………………..87
5) Environment setting ………………………………………………………..88
6) Switching menu ………………………………………………………………90
7) Data search ………………………………………………………………….90
8) Data transfer …………………………………………………………………91
9) Data import ………………………………………………………………….92

11/106
Version 1.2
CardioXP Operation Manual
4. ECG order management .................................... …………………..94
1) Display and function ………………………………………………………95
2) ECG recording ………………………………………………………………96
3) Patient information monitoring ………………………………………….96
4) Data deleting ………………………………………………………………..97
5) Environment setting ………………………………………………………..98
6) Switching menu ………………………………………………………………98
7) Data Search …………………………………………………………………98
5. System Management …………………………………………………….100
1) Maintenance and Cleaning ……………………………………………101
2) Regular Check-up ………………………………………………………..101
3) Trouble Shooting ………………………………………………………….101
6. Specification ……………………………………………………………….103

12/106
Version 1.2
CardioXP Operation Manual
1. General Information
1) Overviews of the product
2) Characteristics of the product
3) Components of the product
Basic components and accessories
Options
Main components
Patient signal module components
Graphic display LCD
Operation panel
4) System installation
Precautions for installation
Connecting power supply
Connecting patient signal module
Connecting wire mode
Connecting wireless mode
Installing the recording paper
5) System Setting
Setting Initialization
6) System Starting

13/106
Version 1.2
CardioXP Operation Manual
1) Overviews of the product
Cardio XP is medical equipment with 12 channels to measure and record the
patient’s ECG.
It provides parameters for diagnosis and automatic diagnosis, but also is
effective to manage the charts of the user as the user can print out the patient’s
information of the record of patient’s ECG. It is also possible to manage the digital
files by transferring the stored data to PC connected to the network.
In addition, for the convenience of the user, it is possible to measure ECG,
apply the filter, save the ECG data, extract the parameter, diagnose
automatically and print out the result with only one click. Also, asthe usercan tilt
and rotate the LCD monitor, the user can check the data on the screen at any location.
If a battery (optional accessory) is inserted, it is possible and easy to carry the product
for mobile examination or emergency.
When using a wireless pack, it is possible to move freely, because there is no
need for a line between the products with the patient.

14/106
Version 1.2
CardioXP Operation Manual
2) Characteristics of the product
- 12ch ECG waveform consists of various channels, such as 3ch+1rhythm, 3 ch+3
rhythm or 6ch+1rhythm. The result is printed in the A4 size chart paper.
- The rhythm of 1 channel is stored for 60 seconds and printed in the A4 size chart
paper.
- Real time 12 channel rhythm can be printed out simultaneously.
- Heart beat PR interval, QRS interval, QT interval, QTc and P-R-T axis, necessary
for diagnosis, are calculated automatically and printed with ECG.
- The result can be gained through automatic diagnosis.
- It helps diagnosis as it is possible to print out the result after changing filter
setting, signal size, printing speed, channel composition or rhythm setting of
previously saved ECG data.
- It is easy to manage the printing papers by adapting Z-Folder Printer.
- It is effective to manage the patient’s charts, as the user can input and print out the
patient’s information.
- It is possible to have a built-in battery, which makes it easy for carrying and moving.
- Wireless measure is possible by adapting the Wireless Patient Module (Optional).
- It is easy and convenient to use anywhere as the user can rotate, tilt and wall mount
the equipment due to its new concept of design.
- More than 120 patient’s data can be saved and transferred to another PC through
LAN as well as through SD Card or USB Memory.
- It offers various protocols to make it possible to link with hospitals’ computing networks.
Also File and Order Database are strengthened.

15/106
Version 1.2
CardioXP Operation Manual
3) Components of the product
These are the components of the product. Please make sure that the following basic
components and accessories are supplied. Also, please check whether the
components, including accessories are working well.
Basic components and accessories
Cardio XP Hardware (1 EA): ECG recording machine
Patient cable (1 EA): It transfers the patient’s ECG signal from an
electrode to the module (11 Pin)
Patient signal module (1 EA): It processes the patient’s ECG signals
Cable (1 EA): It transfers the patient’s ECG signal from the module to the
hardware (8 Pin)
Limbs electrode (1 SET): It’s connected with patient’s body
Chest electrode (1 SET): It’s connected with patient’s chest
ECG chart (1 EA):It’s for recording the ECG result
ECG gel (1 EA): It’s for applying on the patient’s skin when measuring
ECG
Power cable (1 EA): It’s a lead to connect power
Operation manual & Diagnosis guide (1 EA): Operation manual &
diagnosis guide
③
⑤
⑥
⑩
①
⑦
⑨
⑧
②
④

16/106
Version 1.2
CardioXP Operation Manual
Options
Battery pack (1 EA)
Wireless pack & dongle (Each 1 EA)
Patient’s signal module cradle (1 EA)
Paper guider for Letter (1 EA)
Wall panel & Paper guider (Each 1 EA)
Disposable electrode (10 EA)
PC Software CD (1 EA)
LAN Cable [Ethernet-RJ-45] (1 EA)
Protective earth line (1 EA)
Cart (1 EA)
①
③
②
⑥
④
⑤
⑩
⑦
⑨
⑧

17/106
Version 1.2
CardioXP Operation Manual
Main components
▣Upper View
①LCD: It shows the product’s operation state
②Power switch: It turns on or off the product
③LED: It shows the power & battery state
④Control Unit (Key & Rotary switch): It’s to input the patient’s information and to
select the functions
①
②
④
③

18/106
Version 1.2
CardioXP Operation Manual
▣Lower View
①Battery Cover: to insert the batteries
②Wall Mount Panel Socket: to fix the product on the wall
③Foot Rubber
▣Front View
①THERMAL PRINTER: It prints out the patient’s ECG waveform or various analysis
results
①
②
①
③

19/106
Version 1.2
CardioXP Operation Manual
▣Rear View
①②③④⑤⑥⑦
①AC power terminal: It can be connected to AC power supply
②Grounding terminal: It can be connected to the external grounding terminal
when there is no protective earth
③Serial Port: It’s for telecommunication between external equipments.
④Patient signal module socket: It can be connected to patient’s signal module
cable
⑤External monitor socket: It can be connected to the external monitor
⑥USB Port: It’s for telecommunication between external equipments and USB
⑦LAN Port: It’s for telecommunication between external equipments and LAN

20/106
Version 1.2
CardioXP Operation Manual
▣Left View
▣Right View
SD Card Socket: It’s for inserting SD Card
USB Port: It’s for telecommunication between external USB equipments.
WARNING
It is strictly prohibited to open the cover because of electric shock.
Only an authorized person can disassemble the product.
①
②