BIQU Hurakan User manual

1 / 63
BIQU
HURAKAN
User Manual v1.1

2 / 63
WWW.BIQU3D.COM
Contents
1. Packing List..........................................................................................3
2. Specifications......................................................................................4
3. Assembly ..............................................................................................5
4. Tuning..................................................................................................17
4.1 Adjust the Eccentric Nut.......................................................17
4.2 Check Household Voltage....................................................19
4.3 Screen Introduction...............................................................20
4.4 Platform Leveling ...................................................................21
4.5 Insert Filament.........................................................................26
4.6 Tuning of Nozzle Height........................................................27
5. Printing Preparation.........................................................................28
5.1 Cura Installation......................................................................28
5.2 Cura Slicer Setting.................................................................28
5.3 Cura Slicing..............................................................................31
6. Printing ............................................................................................33
6.1 Print via a MicroSD Card ......................................................34
6.2 Print via WiFi............................................................................36
6.3 Print via a USB Drive.............................................................39
7. Other Function...............................................................................41
7.1 MicroProbe Calibration.........................................................41
7.2 Auto Leveling...........................................................................44
7.3 ON/OFF of the Filament Runout Sensor...........................45
7.4 For Expansion Module..........................................................46
7.5 Display Model Thumbnail.....................................................46
7.6 ADXL345 Input Shaping Calibration..................................49
7.6.1 Install on X Axis Printhead........................................49
7.6.2 X Axis Calibration........................................................53
7.6.3 Install on Heated Bed (Y Axis) .................................54
7.6.4 Y Axis Calibration........................................................56
8. FAQ ...................................................................................................59
9. Cautions ..........................................................................................63

3 / 63
WWW.BIQU3D.COM
1. Packing List
Tools
(1set)
Screw
Accessories
(1set)
BIQU-Hurakan
TF Card + Card
Reader (1set)
Nozzle
(1pc)
Power Cord
(1pc)
Filament for Test
(50g)
Zip Ties
(10pcs)

WWW.BIQU3D.COM
4 / 63
2. Specifications
Specifications
3D Printer Name
BIQU-Hurakan
Build Volume
220 x 220 x 270 mm
Printhead
1pc
Layer Thickness
0.1 - 0.3 mm
Nozzle Diameter
Standard 0.4 mm
Printing Accuracy
±0.05 mm
Filament
PLA/ABS/PETG...(Any material with print
temp lower than 260℃, including flexible
filament with 95A stiffness.)
File Format
G-code
Firmware
Klipper
Printing Method
USB Drive / LAN Controlled
Slicing Software Supported
Cura / Repetier-Host / Simplify 3D...
Rated Voltage
100 - 120V / 200 - 240V 50 / 60 HZ
Output Voltage
24V
Rated Power
280W
Heated Bed Power
100W/240W
Maximum Temperature of
Heated Bed
100℃
Maximum Temperature of
Nozzle
260℃
Default Speed Limit
(Firmware)
180 mm/s
Suggested Printing Speed
120 mm/s
Filament Runout Detection
Standard Feature

5 / 63
WWW.BIQU3D.COM
3. Assembly
Step 1: Remove the Z Axis Motor from the Gantry
Take out the Z axis motor from the gantry by removing the
two M4x16 screws, and then remove the lead screw cover.

WWW.BIQU3D.COM
6 / 63
Step 2: Assemble the X Axis Module and Gantry

7 / 63
WWW.BIQU3D.COM
Step 3: Install the Z Axis Motor Back to the Gantry
Insert the lead screw into the nut, and rotate the coupling to
push the lead screw upward until the Z axis motor fixing
holes are aligned with the M4 holes on the gantry.

WWW.BIQU3D.COM
8 / 63
Step 4: Mount the Gantry on the Machine Base
Tilt the machine base for an easy installation of the gantry.
Place the gantry in its mounting slot, and tighten the
screws.

9 / 63
WWW.BIQU3D.COM
Step 5: Install the Filament Bracket
Loosen the T-nut slightly, place the filament bracket in the
top slot, and then tighten the screw with a screwdriver. The
T-nut will rotate slightly during the tightening process to
become stuck in the aluminum extrusion slot to fix the
filament bracket.

WWW.BIQU3D.COM
10 / 63
Step 6: Install the Screen

11 / 63
WWW.BIQU3D.COM
Step 7: Wiring

WWW.BIQU3D.COM
12 / 63

13 / 63
WWW.BIQU3D.COM

WWW.BIQU3D.COM
14 / 63

15 / 63
WWW.BIQU3D.COM

WWW.BIQU3D.COM
16 / 63
Step 8: Install the PTFE Tube

17 / 63
WWW.BIQU3D.COM
4. Tuning
4.1 Adjust the Eccentric Nut
If it is found that the machine is too tight or too loose (there
is a shaking phenomenon) during the movement, you can
adjust its tightness by adjusting the eccentric nuts of X, Y,
and Z with a wrench.

WWW.BIQU3D.COM
18 / 63

19 / 63
WWW.BIQU3D.COM
4.2 Check Household Voltage
Before powering the machine on, select the right voltage by
using a screwdriver to toggle the switch to the
right(115V)/left(230V) position.

WWW.BIQU3D.COM
20 / 63
4.3 Screen Introduction
Control Knob: Enter and exit the control interface, up and
down selection.
Reset Button: Reset button for the motherboard control
system.