Birlea CORFU User manual

Vendor: S000053
Page 1 of 6
ASSEMBLY INSTRUCTIONS
CORFU BUNK BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CORFU BUNK
BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
Be aware of the danger of young children (under 6) falling from the upper bunk. It is not advisable for
children under the age of 6 to sleep on the top bunk
This bed frame complies to EN 747 – 1&2 (2012)
CAUTION: There is the risk f strangulati n t children fr m items such as string, r pes, c rds, harnesses and
belts hanging fr m the bed frame
WARNING: Children can bec me trapped between the bed and the wall. T av id risk f seri us injuries please
be aware f the distance between the wall and the t p safety barrier
WARNING: If this bed is placed n a n n-carpeted fl r y u must place s me pr tecti n under all legs t st p
the bed frame fr m m ving. If this is n t adhered t there is n guarantee if the bed frame c llapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
Recommended maximum mattress height for top bunk is 200 mm
www.birlea.com

Vendor: S000053
Page 2 of 6
Parts List Hardware List (f und in b x 2)
Part Descripti n B x Qty Part Descripti n Qty
1 Upper Frame 1 2 A M8 Metal Square Nut 8
2 Bottom Frame 1 2 B M8 x 95 mm JCBC Screw 8
3 Bottom Base 2 1 C M6 x 45 mm JCBC Screw 8
4 Top Base 2 1 D M6 x 15 mm JCN Nut 8
5 Back Rail 2 1 E M6 x 80 mm JCBC Screw 9
6 Front Rail 2 1 F M6 x 35 mm JCBC Screw 4
7 Ladder 2 1 G M6 Cap Nut 2
8 Frame Connector 1 4 H 19 mm M6 Flat Round Washer 2
** M4 Allen Key & M5 Allen Key
pr vided
I 50 mm Black Round Stopper 4
J 50 mm Beige Round Cap 4
K Black Round Stud 10

Vendor: S000053
Page 3 of 6
Step 1: Insert hardware part I to the bottom frame (2) then slot the bottom base (3) into the brackets on the
bottom frame. Place the frame connectors (8) onto the bottom frame then insert the upper frames (1) by
facing hole to hole as shown in views and B.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Step 2: Secure the frame connectors (8) using hardware parts C and D for the back two bedposts as shown
in view B, then insert hardware part K into the front two bedpost holes as shown in view .
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.

Vendor: S000053
Page 4 of 6
Step 3: Slot the top base (4) into the brackets on the upper frame (1) and secure using hardware parts and
B at the four corners. Then secure the bottom base (3) using hardware parts and B at the four corners but
do not tighten the screws yet.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Step 4: Secure the horizontal tube of the back rail (5) to the upper frame (1), then secure the back rail to the
top base (4) using hardware part E.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.

Vendor: S000053
Page 5 of 6
Step 5: Secure the horizontal tube of the front rail (6) to the upper frame (1), then secure the front rail to
the top base (4) using hardware part E.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Step 6: ssemble the ladder (7) using hardware parts F, G and H.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.

Vendor: S000053
Page 6 of 6
Step 7: Insert hardware part J onto the upper frame (1) and put hardware part K into the extra 10 mm holes.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.