Birlea URBAN STUDY DESK User manual

URBAN STUDY DESK
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR URBAN STUDY DESK.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber into the accessories pack.
HEALTH & SAFETY:
DO NOT use this study desk if any parts are missing, damaged or worn.
DO NOT use this study desk unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the study desk as this will cause damage.
Always lift the study desk with two people to repositions.
Keep any sharp objects away from the study desk.
1
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 4
Vendor: S000350

Page of 4
Vendor: S000350
Parts List Hardware List
Part Descripion Qty Part Description Qty
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
** Note : To secure the item to the wall, hardware F ( 2 pcs ) and H ( 2 pcs ) are not provided.
01 1
Top panel
02
03
04
05
06
07
08
09
Bottom panel
Metal Center
1
Metal Side ( Right )
B
C
D
E
F
G
H
1
4
12
6
JCBC screw M6 x 30mm
JCBC screw M6 x 40mm
A
2
Step 1: Attach the Metal Top Right (8) to Metal Side Right (5) using hardware A and D.
Attach the Metal Top Left (7) to Metal Center (6) using hardware A and D.
DO NOT tighten all the screw.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Metal Side ( Left ) 1
1
1
Metal Top ( Right )
Metal Top ( Left ) 2
2
Metal Bottom 1
1
Middle panel
M3.5 x 16mm C.B Screw 2
-
M4 x 38mm C.B Screw
Wall plug -
8'' x 1'' PP tape 2
Allen key M4
JCBC screw M6 x 20mm
01
02
03
04
05
06
07
07
08
08
09
D
A
05
04
06
07
07
08
08 07
D
A
06

Page of 4
Vendor: S000350
Step 2: Attach the Metal Bottom (9) to Metal Center (6) using hardware A and B.
Attach the Metal Bottom (9) to Metal Side Left (4) using hardware A and B.
Attach the Metal Top Left (7) to Metal Side Left (4) using hardware A and D.
DO NOT tighten all the screw.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach the Metal Side Left (4) and Metal Side Right (5) to panel (1) using hardware A and C.
DO NOT tighten all the screw.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
3
A
C
09
06
B
B
A
A
B
B
04
09
09
07
07
05
08
08
06 04
D
A
Step 4: Attach the Metal Side Right (5) and Metal Center (6) to panel (2) using hardware A and C.
Attach the Metal Side Right (5) and Metal Center (6) to panel (3) using hardware A and C.
DO NOT tighten all the screw.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
06 05
04
09
07
07
01 08
08
A
C
04
05
06
09
03
02
01
04

Page of 4
Vendor: S000350
4
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
Step 6: To secure the item to the wall use hardware F, G and H using a screwdriver (not provided).
Then attach hardware part G to the panel (1) using hardware E with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
F
G
H
1.
G
E
2.
PLEASE NOTE that wall fixings are not supplied as different wall materials require different fixing
devices. You must use fixings devices suitable for the type of wall you intend to mount product to.
Ensure the head of any screw used has a diameter greater than the mounting hole and the fixing
is safe and secure before use.
Birlea Furniture advise you use the wall straps provided to further enhance the safety of this
product.
Step 5: Stand the table and tighten all the screw
DO NOT use any power tools as this may damage the frame and will invalidate any claim.