Birlea URBLSBRUS User manual

URBAN LARGE SIDEBOARD RUSTIC
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR URBAN LARGE DRAWER RUSTIC.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to repositions.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 9
Vendor: S000350
1

Parts List Hardware List ( BOX 2 )
Part Descripion Qty Part Description Qty
01 1
Top panel
02
03
04
05
06
07
08
09
10
Bottom panel
Metal middle
1
1
1
2
2
Side panel (Left)
Metal Side ( Left & Right )
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I
J
M6 x 50mm CSK Cap Wood screw
M3.5 x 16mm C.B Screw
16
16
16
20
8
82
40
Handle 100.96. BLM
Allen key M4 1
7
Handle screw M4 x 19mm 14
JCBC screw M6 x 30mm 10
JCBC screw M6 x 40mm 4
M4 x 38mm C.B Screw
A1
A3
2
11
Drawer front
Drawer back
Drawer side
3
2
4
10
14'' Drawer slide (Left / Right)
14'' Drawer slide (Left / Right)
10
10
K1
K2
Side panel ( Right )
12
15
16
17
Center panel (Left)
Center panel (Right)
1
1
Back panel
Door panel (Left)
3
1
Door panel (Right) 1
L
M
N1
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
** Note : To secure the item to the wall, hardware E
( 2 pcs ) and Q ( 2 pcs ) are not provided.
8'' x 1'' PP tape 2
Wall plug -
N2
P
7/8 Hinges 4
18
Back bone 1
Bone panel 2
Drawer stopper ( 2 Pin ) 2
O
Q
Stud 192 8
8
Stud 192 screw
Box
1
1
1
1
1
1
2
2
1
1
1
1
2
2
2
2
2
5
2
Page of 9
Vendor: S000350
01
09
04
11
10
07
07 05 06
17
17
18 18
02
G
14
13
16 15
14
15
03 08
09
09
Metal leg center 1
Drawer front (Left & Right)
13
14
Drawer bottom
G
G
G
O
X2
X2
X2
X2
X2
X2
X3
X3
X3
X3
16 15
12 X3
15 X3
12

3
Page of 9
Vendor: S000350
Step 1: Insert hardware parts A1, A2, B, D, F, G, H, L, M and N1 into part
(1),(3),(4),(5),(6),(7),(8),(10),(11),(12),(13) like the below.
01
A2 x8
A2 x1
Bx4 A1 x2
03
04
04
03
05 05
05 05
06 06
06 06
N1
DD
D
N1
N1
A2 x1
Bx4 A1 x2
A2 x1
A2 x2
Bx4 A1 x2
Left Face
Right Face
Left Face
Right Face
N1
DDD
N1
N1
A1 x2
A2 x2
Bx4
A2 x1
D x 38
M x 4
H x 14
G x 7
N1 x 10
( L/R )
A1 x 16
A2 x 16
B x 20
L x 2

4
Page of 9
Vendor: S000350
08
07 x2
10 11
G
G
G G
D
D
M
Step 2: Attach center panel left (5) and center panel right (6) to back bone (8) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A3 x 4
A1 A2
A1
A3
06
05
08
A1 x2
Bx2
A1 x4
Lx1
Hx2
12 x3 13 x2
Hx2

5
Page of 9
Vendor: S000350
Step 3: Attach side panel (3) and side panel (4) to bone panel (7) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach side panel (3), side panel (4), center panel (Left) (5), center panel (right) (6) to top panel (1)
using hardware A1 and A2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Insert back panel (9) along the slot.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
03
05
08
06
04
01
04
06
05
03
08
07
07 A3 x 4
A1
A1
A3
A2
A3 x 8
A1
A1
A3
A2
09
09
08
09
01
03
05
06
04

6
Page of 9
Vendor: S000350
Step 6: Attach bottom panel (2) to side panel (3), side panel (4), center panel (left) (5) and
center panel (right) (6) using hardware C and F.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
K1
K2
K2 x 8
K1 x 8
Step 7: Attach hardware K1 into top panel (1), bottom panel (2), side panel (3) and (4) using hardware K2 with
a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 8: Attach metal frame middle (18) to bottom panel (2) using hardware F and I.
Attach metal leg center (O) to bottom panel (2) using hardware D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
C
FC x 8
F
02
09
03
09
08
05
06
04
09
02
09
09
09
08
03
04
05
06
01
F
I
18 I x 6
F
02
D x 4
ROTATE
18
18
O x 1
O
D

Page of 9
Vendor: S000350
7
Step 9: Attach metal frame side (17) to side panel (3) and (4) using hardware F and I.
Attach metal frame side (17) to metal frame middle (18) using hardware F and J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 10: Attach door panel (10) to side panel (3) and door panel (11) to side panel (4) using hardware D with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
MD
D
M
M
Vertical
Adjustment
Horizontal
Adjustment
Depth
Adjustment
10
05
01
04
11
02 06
07
D x 8
I x 4
F
J x 4
17
F
I
17
F
J
18
18
17
17
02
03
04
01
03
07

Page of 9
Vendor: S000350
8
Step 11: 1.Attach the drawer side (15) to the drawer back (14) and drawer front (12) using hardware part (E).
2.Slide in the drawer bottom (16) then attach the drawer side (15) using hardware part (E).
3.Attach the hardware part (N2) to the drawer sides (15) using hardware part (D).
Step 12: 1.Attach the drawer side (15) to the drawer back (14) and the drawer front (13) using hardware part (E).
2.Slide in the drawer bottom (16) then attach the drawer side (15) using hardware part (E).
3.Attach the hardware part (N2) to the drawer sides (15) using hardware part (D).
X2
15 X2
13
X2
14
X2
16
X2
16
X2
14
X2
15
X2
13
X2
15
X2
16
X2
14
X2
15
X2
13
X2 15
X2
14
X2
15
X2
13
D
D
D
D
D
D
N2
N2
N2
N2
D x 12
N2 x 4
( L/R )
E x 16
N2 N2
X3
15 X3
12
X3
14
X3
16
X3
16
X3
14
X3
15
X3
12
X3
15
X3
16
X3
14
X3
15
X3
12
X3 15
X3
14
X3
15
X3
12
D
D
D
D
D
D
N2
N2
N2
N2
D x 18
N2 x 6
( L/R )
E x 24
N2 N2
Ex4
Ex4
Ex4
Ex4

Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
PLEASE NOTE that wall fixings are not supplied as different wall materials require different fixing
devices. You must use fixings devices suitable for the type of wall you intend to mount product to.
Ensure the head of any screw used has a diameter greater than the mounting hole and the fixing
is safe and secure before use.
Birlea Furniture advise you use the hardware P ( 2 pcs ) are provided to further enhance the safety
of this product.
Page of 9
Vendor: S000350
9
Step 14: To secure the item to the wall use hardware E, P and Q using a screwdriver (not provided).
Then attach hardware part P to top panel (1) using hardware D with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
N2
N1
N1
N2
Step 13: Assemble the drawer in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
D x 2
E x 2
P x 2
Q x 2
E
P
Q
1.
P
D
2.
13
13
12
12
12
01
04
10
11