Birlea WINCHESTER 4 DRAWER CHEST User manual

Assembly Instructions
Thank you for
purchasing a
Birlea product.
Forachancetowina Love 2 Shop voucher
simplypostapictureofyournewproduct
onyourpreferredsocialchannelstagging
Birlea Furniture and using the hashtag
#ShareYourStyle and #Birlea .Onewinner
willbeselectedatrandomeachmonth.
To view our full terms and conditions please visit our website. www.birlea.com
Are you happy with your purchase?
Yes: That’sgreat,wewouldlovetohearmorefromyou.Pleaseleaveusareviewon
oursocialmediachannelsorTrustpilot.Yourfeedbackwillbegreatlyappreciated.
No: Ifforanyreasonthereissomethingmissing,indifferentorincorrectwith
yourorder,pleasecontacttheretaileryoupurchasedtheitemfrom.Wewill
workwiththeretailertoresolveyourissueasquicklyaspossible.
www.birlea.com

ASSEMBLY INSTRUCTIONS
WINCHESTER 4 DRAWER CHEST
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING OR USING YOUR WINCHESTER 4 DRAWER CHEST.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damage or
worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of
children. Always use on a level, even
surface.
It is recommended that two people handle and assemble the item.
Birlea advise you use the wall straps provided to further enhance the safety of this product.
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface Periodically check all screws & fixings to
ensure they are secure. DO NOT push the item as this will damage the base.
Always lift the item with two people to
reposition. Keep any sharp objects away
from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots,
grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear
after a period of time.
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature
change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet - do not use soap and water ,
detergents, aerosol sprays or any polish as use of these would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Page 1 of 7
www.birlea.com
Vendor: S000401
940mm
790mm
395mm

Page 2 of 7
Vendor: S000401
Hardware List
Part Item Qty
A Wooden Dowel 26
B Cam Bolt 40
C Cam Lock 40
D Tack 50
E Slip Shoe 4
F 14mm Screw 48
G Sticker 2
H Handle 8
I Side Slide 4
J Drawer Slide 4
K 25mm Screw 1
L Trapeze Fixation 1
M 40mm Screw 4
N Back Profile 1
O Safety Strap 1
4X
012345678 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6
mm
Parts List
Part Item Qty
1 Right Side 1
2 Left Side 1
3 Baseboard 3
4 Top 1
5 Traverse 1
6 Right Column 1
7 Left Column 1
8 Bottom Traverse 1
9 Upper Traverse 1
10 Back 2
11 Drawer Front 4
12 Drawer Back 4
13 Drawer Side 8
14 Drawer Bottom 4
15 Drawer Traverse 4
1
2
4
10
10
14
13
13
12
11
15 7
6
8
3
5
3
3
9

Page 3 of 7
Vendor: S000401
1
5
A
A
2
B
B
B
B
B
4
B
B
76
Step 1: Insert the hardware (A) into the upper traverse (9), baseboard (3), traverse (5) and drawer
side (13).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Step 2: Insert the hardware (B) into the right side (1), left side (2), top (4), bottom traverse (8) right
column (6), left column (7), drawer front (11) and drawer back (12). Then attach hardware (I) to
the right & left side (1 & 2) using hardware (F).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
A
A
13
8X
B
B
B
B
11
12
3
9
A
A
I
F
B
8
3X
B
BF
F
I
I
B
B
4X
4X

Page 4 of 7
Vendor: S000401
C
6
Step 3: Assemble the right column (6) and left column (7) to the right side (1) and left side (2) using
hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
7
C
12
Step 4: Assemble the bottom traverse (8) to the traverse (5) using hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
8
5
C
C
C

Page 5 of 7
Vendor: S000401
C
B
Step 5: Attach the upper traverse (9), the traverse (5) and the baseboard (3) to the right & left side
(1 & 2) using hardware (C) and (A).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
4
1
2
C
C
9
K
L
4
Step 6: Insert hardware (L) and (K) to the upper traverse (9) as shown below. Fix the top (4)
using hardware (C). Then attach hardware (E) and (D) to the bottom of the right side (1), left
side (2).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
D
E
1
2
1
2
C
C
C
5
3
3
3
9
9

Page 6 of 7
Vendor: S000401
BC
C
FJ
J
14
13
12
15
F
F
F
FH
Step 8: Attach the drawer side (13) and drawer traverse (15) to the drawer back (12) using
hardware (B), (C), (M) and screwdriver (not included), then insert the drawer bottom (14).
Attach the drawer side (13) and drawer traverse (15) to the drawer front (11) using hardware (B)
and (C).
Attach hardware (J) to the drawer side (13) using hardware (F). Then attach hardware (H) to the
drawer front (11) using hardware (F).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
D
D
D
10
N
N
10 10 D
Step 7: Attach the back (10) to the back of the assembled product using hardware (D) and combining
them using hardware (N).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
10
13
15
C
M
C
C
FH
15
4X 4X
4X
11
11

Page 7 of 7
Vendor: S000401
Step 9: Insert the drawer as shown below.
Place hardware (G) over the holes shown below.
Attach the safety strap (O) to the back of the sideboard and wall following the diagram.
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Additional Information:
• For complete product information, images and dimension diagrams
please visit the website www.birlea.com
• If you have any issues with your item please contact the retailer
directly you purchased it from who will be able to resolve any
issues with Birlea.
• Why don’t you send us photos of your assembled furniture to i[email protected]
to be shared in our #birleahome feature on Instagram.
J
I
G
Inserting the Drawers
O
Safety Strap