John Lewis CUBE 816/25504 User manual

CUBE Corner desk
Stock number: 816 / 25504
H75.5 W137 D80 cm

1
Thank you for purchasing the CUBE Corner desk. Please read the instructions and warnings carefully before
use, to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality,
safety and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Tools required
Time to assemble
70 minutes
People to assemble

2
Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts out of reach of children .
Ensure the product is fully assembled as illustrated before use.
Do's
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Dont's
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.

3
Your Corner desk
Ref Description Dimension (mm) Qty
Desk top 1370 x 800 x 19 1
Left side panel 584 x 421 x 19 1
Right side panel 584 x 421 x 19 1
Middle side panel 584 x 316 x 19 2
Shelf 384,5 x 302 x 19 2
Bottom 385 x 296 x 19 2
Rail 385 x 79 x 19 2
Back rail 384,5 x 120 x 13 2
Leg 207 x 40 6
Internal dimension
Stock number: 816 / 25504
Desk overall size: H75.5 W137 D80 cm
1
2
3
4
5
6
7
1
8
9
2
3
4
4
5
5
6
6
7
7
8
8
9 x6

4
Fixtures and fittings
supplied (not actual size)
Fixtures and fittings
supplied (actual size)
Ref Description Dimension (mm) Qty
Shelf support 8
Metal plate 80x50 6
Adjustable leg 6
Cover cap 8
Angle 2
Allen key 1
Fixtures and fittings
AA
B
C
E
0 10 20 30 40 50 60 70 80
mm
K
L
M
Ref Description Dimension (mm) Qty
Dowel 8,0x35 30
Connecting bolt 24
Camlock 24
Screw 7,0x38 4
Screw 6,2x16 24
Screw 6,0x16 8
Screw 5,0x16 2
Screw M6x25 6
F
G
H
J
N
O
P

5
A
Product assembly
CUBE Corner desk
25504
Step 1
Parts, fittings and tools
Step 2
Parts, fittings and tools
A 6
A
A
A
A
A
A
A
6
B
7
7
B
B
B
x2
x2

6
CUBE Corner desk
25504
Step 3
Parts, fittings and tools
Step 4
Parts, fittings and tools
A
1. 2. 3.
6
6
7
7
C C
C
C 6 7
2
B
A
4
A
A
A
A
A
A
B
B
B
B
B
B
B 2 4
x2

7
CUBE Corner desk
25504
Step 5
Parts, fittings and tools
Step 6
Parts, fittings and tools
C 4
C 2
6 7
6
1. 2. 3.
7
C
C C
2
6
7
1. 2. 3.
6
7
4
C
C
C

8
CUBE Corner desk
25504
Step 7
Parts, fittings and tools
Step 8
Parts, fittings and tools
C
A
3
B 3 4
1. 2. 3.
B
A
3
4
A
A
A
A
A
A
B
B
B
B
B
B
3
6
7
C
C
C
6 7

9
CUBE Corner desk
25504
Step 9
Parts, fittings and tools
Step 10
Parts, fittings and tools
B
C
1
4 6 7
1. 2. 3.
4
6
7
C C
C
1
B

10
CUBE Corner desk
25504
Step 11
Parts, fittings and tools
Step 12
Parts, fittings and tools
C
C
1
1 2 4
1. 2. 3.
C
C
C
C
2
1
4
1. 2. 3.
1
4 3
C
C
C
C
3 4

11
9
CUBE Corner desk
25504
Step 13
Parts, fittings and tools
Step 14
Parts, fittings and tools
M
L
9
x6
9
x6
Step 15
Parts, fittings and tools
F 9
J
J
L
M
9
6
6
9
9
9
9
9
9
9
F F
F F
x6
6

12
CUBE Corner desk
25504
Step 16
Parts, fittings and tools
Step 17
Parts, fittings and tools
G K
2
4
G G
G
G
K
K
K
K
K
G
42

13
CUBE Corner desk
25504
Step 18
Parts, fittings and tools
Step 19
Parts, fittings and tools
K
G
G G
G G
K K
K K
3
4
G K 43
x2
5
A
A
A
A 5

14
CUBE Corner desk
25504
Step 20
Parts, fittings and tools
Step 21
Parts, fittings and tools
E P 85
x2
5
A
5
8
E
E
5 8
5 5
2
4 4
3

15
CUBE Corner desk
25504
Step 22
Parts, fittings and tools
N
2
4
3
4
N N N N
WARNING
Always lift the unit from the base when moving it, do not drag along the
ground, as this may damage the legs. It is recommended that two people
should move the unit, never move it alone.
NEVER DRAG UNIT ALONG
THE GROUND ALWAYS LIFT THE UNIT FROM
THE BASE WHEN MOVING
Step 23
Parts, fittings and tools

16
CUBE Corner desk
25504
Step 24 Final assembly
Parts, fittings and tools
Mark the drill hole positions.
Remove the unit and drill a hole for
wall plug in the marked positions.
Chose correct fixings for your type
of wall (see page 17).
With help, lift the unit up and
aligning the holes, fix to the wall
using the correct screws and tighten
fully.
The assembly is now complete.
Warning
Serious or fatal crushing
injuries can occur from
furniture tipping over. To
prevent this furniture
tipping over it must be
permanently fixed to
the wall.
H O
H
O

17
A guide to wall mounting and fixings
A guide to wall mounting and fixings
Warning
Serious or fatal crushing injures can occur from furniture tipping over.
To prevent this furniture from tipping over it must be permanently fixed to the wall.
Wall fixing screws are not included, since different wall materials require different types of screws / fixing.
Please ensure you use the correct screws / fixing for your type of walls and seek professional advice if
you are not sure.
Failure of the product due to inncorrect fixings is the responsibility of the installer.
Important: When drilling into the walls always check that there are no hidden wires or pipes etc.
Type of walls
You can use one of the following types of wall plug if your walls are
made of brick, breezeblock, concrete, stone or wood.
1. General Purpose wall plug
Generally aerated blocks shoud not be used to support heavy loads, use
a specialist fitting in this case. For light loads, general - purpose wall
plugs can be used.
2. Plasterboard wall plug
For use when attaching light loads on to plasterboard partitions.
3. Cavity Fixing wall plug
For use with plasterboard partitions or hollow wooden doors.
4. Cavity Fixing - Heavy Duty wall plug
For use when fitting or supporting heavy loads such as shelving, wall
cabinets and coat racks.
5. Hammer Fixing wall plug
For use with walls stuck with plasterboard. The hammer fixxing allows
it to be fixed to the wall rather than the plasterboard. Always check the
fixing is secure to the retaining wall.
6. Shield Anchor wall plug - Heavy loads
For use with heavier loads such as 1V and Hi-Fi speakers and satellite
dishes etc.
Care and maintenance
Safety: Periodically check all fittings and wall fixings to ensure they
have not come loose and retighten as necessary.

Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary
ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer
fronts by the way slivers are arranged.
AII timber and veneer surfaces will change colour and mellow over time. New furniture will initially vary in
shade from items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre.
Spray polishes are best avoided as they contain silicones which may spoil the furniture's surface when building
up over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately
and ensure that a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to
heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused
by home heating can cause damage such as warping.
Safety instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Your feedback is very important to us and we would love to hear your comments on your new furniture.
Please visit our website to leave a review. Thank you.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E SNN
johnlewis.com