Birlea Winchester WIN3WCRO User manual

Assembly Instructions
Thank you for
purchasing a
Birlea product.
Forachancetowina Love 2 Shop voucher
simplypostapictureofyournewproduct
onyourpreferredsocialchannelstagging
Birlea Furniture and using the hashtag
#ShareYourStyle and #Birlea .Onewinner
willbeselectedatrandomeachmonth.
To view our full terms and conditions please visit our website. www.birlea.com
Are you happy with your purchase?
Yes: That’sgreat,wewouldlovetohearmorefromyou.Pleaseleaveusareviewon
oursocialmediachannelsorTrustpilot.Yourfeedbackwillbegreatlyappreciated.
No: Ifforanyreasonthereissomethingmissing,indifferentorincorrectwith
yourorder,pleasecontacttheretaileryoupurchasedtheitemfrom.Wewill
workwiththeretailertoresolveyourissueasquicklyaspossible.
www.birlea.com

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING OR USING YOUR WINCHESTER 3 DOOR WARDROBE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damage or
worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of
children. Always use on a level, even
surface.
It is recommended that two people handle and assemble the item.
Birlea advise you use the wall straps provided to further enhance the safety of this product.
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean
surface Periodically check all screws & fixings to ensure
they are secure. DO NOT push the item as this will
damage the base.
Always lift the item with two people to
reposition. Keep any sharp objects away
from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots,
grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear
after a period of time.
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature
change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet - do not use soap and water ,
detergents, aerosol sprays or any polish as use of these would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Page 1 of 6
www.birlea.com
Vendor: S000401
1800mm
1119mm
520mm
ASSEMBLY INSTRUCTIONS
WINCHESTER 3 DOOR WARDROBE

Page 2 of 6
012345 6 7891 0 1 1 1 2 1 3 1 4 1 5 1 6
mm
Hardware List
Part Item Qty
A Wooden Dowel 8
B Cam Bolt 34
C Cam Lock 36
D Tack 100
E Slip Shoe 4
F 25mm Screw 5
G 14mm Screw 42
H Sticker 8
I Handle 3
J Hat Stand Suport 2
K 45mm Screw 6
L Hinge High 6
M Door Stop 1
N Back Profile 1
O Hatstand 1
P Double Cam Bolt 1
Q Hinge 3
R Larger Wooden Dowel 1
S 40mm Screw 2
T Safety Strap 2
3X
Parts List
Part Item Qty
1 Right Side 1
2 Left Side 1
3 Base 1
4 Top 1
5 Middle Top 1
6 Back Traverse 2
7 Column 2
8 Division 1
9 Baseboard 1
10 Shelf 1
11 Back 3
12* Door 3
13 Small Back Traverse 1
14 Bottom Traverse 1
15 Upper Traverse 1
1
2
3
8
4
11 11 11
10
5
7
79
14
6
6
15
13

Page 3 of 6
Vendor: S000401
B
B
4
B
B
14
Step 1: Insert the hardware (A) into the back traverse (6), baseboard (9) and small back
traverse (13).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Step 2: Insert the hardware (B) in the right side (1), left side (2), top (4), division (8), column (7) and
bottom traverse (14). Then fix hardware (J) onto the division (8) and left side (2) using hardware (G)
and insert the hardware (A) into the division (8).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
A
6*
A
A
9
A
1X
2
B
B
B
B
B
B
G
J
B
B
B
B
7
2X
13
A
6
1X
A
B
A
A
B
B
B
G
J
8
1B
B
B
B
B

Page 4 of 6
Vendor: S000401
Step 3: Assemble column (7) to the right side (1) and left side (2) using hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
C
12
7
C
C
C
Step 4: Attach the bottom traverse (14) to the base (3) using hardware (C). Then fix hardware
(M) onto the base (3) using hardware (G).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
3
14
G
M
C
C

Page 5 of 6
Vendor: S000401
1
2
C
C
Step 5: Attach hardware (L) to the door (12) using hardware (G).
Attach hardware (I) to the door (12) using hardware (K).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
G
KQ
I12*
3
1X
Step 6: Attach the division (8) to the base (3) using hardware (A), (S) and screwdriver (not included).
Then attach the base (3) and baseboard (9) to the right side (1) and left side (2) using hardware (C).
Attach the back traverse (6) and middle top (5) to the left side (2) and division (8) using hardware (A),
(P), (R) and (C). Then attach the shelf (10) and small back traverse (13) to the right side (1) and
division (8) using hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
C
B
S
5
C
C
C
6
6*
G
KL
I12
2X
10
8
13
CC
C
C
C
C
9
R
P
6
13
8
12
3
C
C

Page 6 of 6
Vendor: S000401
Step 7: Attach the top (4) using hardware (C). Then attach hardware (E) and (D) to the bottom of the
right side (1) and left side (2).
Attach the upper traverse (15) to back traverse (6) and small back traverse (13) using hardware (F).
Insert the hardware (O) inside the product, above the hardware (J).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
C
D
E
11
N
11 11
Step 8: Attach the back (11) to the back of the assembled product using hardware (D) and combining
them using hardware (N).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
11
15
4
CF
F
C
C
O
11
N
D
D
D
D

Page 6 of 6
Vendor: S000401
12 G
L
Additional Information:
• For complete product information, images and dimension diagrams
please visit the website www.birlea.com
• If you have any issues with your item please contact the retailer
directly you purchased it from who will be able to resolve any
issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [e-mail]
to be shared in our #birleahome feature on Instagram.
H
12
Step 9: Fix door (12) to the right side (1), left side (2) and division (8) using hardware (G), (L), (Q)
and a screwdriver (not provided).
Insert hardware (H) over the holes show below.
Attach the safety strap (T) to the back of the wardrobe and wall following the diagram.
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
12*
12
T
Safety Strap