Birlea EDGEWARE GLASS DOOR CABINET User manual

Assembly Instructions
www.birlea.com
That’s great, we would love to hear more from you. Please leave us a review on
our social media channels or Trustpilot. Your feedback will be greatly appreciated.
If for any reason there is something missing, indifferent or incorrect with
your order, please contact the retailer you purchased the item from. We will
work with the retailer to resolve your issue as quickly as possible.
Yes:
No:
For a chance to win a Love 2 Shop voucher
simply post a picture of your new product
on your preferred social channels tagging
Birlea Furniture and using the hashtag
#ShareYourStyle and #Birlea. One winner
will be selected at random each month.
Are you happy with your purchase?
To view our full terms and conditions please visit our website. www.birlea.com
Thank you for
purchasing a
Birlea product.

Page 10
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR
USING YOUR EDGEWARE GLASS DOOR CABINET.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
EDGEWARE GLASS DOOR CABINET
HEALTH & SAFETY:
www.birlea.com
ASSEMBLY INSTRUCTIONS
Assemble in the room of use
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To remove the printed numbers on the pieces, use the eraser provided
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
CARE & MAINTENANCE:
1
of
Rev 00
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children
Always use on a level, even surface.
Recycle
1m
2,5m
Vendor: S000139

01
02
10
02
Left Side
9
2
2
03
Box
1
1
8
1
2
2
10
04
Upper Base
Part
1
1
Bottom Base
12
5
7
77
2
1
2
1
2
Page
Back
11
07
05
1
Shelf 1
Descripion
1
1
1
1
Door
2
4
6
11
76
1
1
1
1
1
Right Side of Drawer
Left Side of Drawer
Bottom of Drawer
Rear of Drawer
Drawer Front
of
Drawer Top Base
Mobile Shelf
77
76
09
08
06
Right Side
10
1
Parts List Qty
1
1
1
1
3
12
Vendor: S000139

Hinge shim
1
Hardware List
DescripionPart
Glue
of
1
Bushing
3 Page 10
A2 Small plastic foot
1
4
5,0 x 60 mm Screw
A1
Qty
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
** Wall plug and screw is supplied to attach strap to the wall.
12
2
2
2
2
6
1
Drawer slide right
Metallic slide the left field
Metallic slide the right field
Drawer slide left
S3,5 x 14 mm Screw
T3,5 x 25 mm Screw
XA
XB
XC
XD
3
P7
16
P5 3,5 x 14 mm Screw
Handle
8
42
O
N
4,5 x 45 mm Screw
10 x 10 mm Tack
8
Bore patch adhesive
M3,5 x 12 mm Screw
L9
16
LCam Lock
16J Simple Minifix Screw
1
8
E3
32
Strap
E9
8 x 30 mm Wooden Dowel
Shelf Bracket
E
3
3
Metal hinge super high
A
151476543210 8 9 10 11 12 13 16
B3
D6
D5

2X
77
Page
2X
Step 2:
10
of
08
4
Attach hardware part E to the shelf and drawer top base (03) and (04) using a small mallet
(not provided).
Attach the hardware part J to the drawer front (08) using the a screwdriver (not provided). Then
attach the hardware part E to the bottom base (05) using a small mallet (not provided).
Attach hardware part E to the left, right and rear of drawer (09), (76) and (77) using hardware part A1 and
a small mallet (not provided).
05
2X
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
76
2X
09
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 1:
03
Step 3:
04
E
E
E
E
E
E
E
E
E
E
E
E
E
A1
Vendor: S000139
E
E
E
J
J
E
E
E
E
E

Page
Step 5:
5
Step 4:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
of
07
Attach the hardware part D6 to the door (12) using the hardware part L9 and a screwdriver
(not provided).
Attached the hardware parts E and E3 to the right side (07) using a small mallet. Then attach the
hardware part J using a screwdriver (not porvided).Then attach the hardware part XB using the hardware P5 and
a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
10
12
Vendor: S000139
E
E
J
J
J
J
J
J
E3
E3
E3
E3
P5
XB
ATENTION FOR POSITION
L9
L9
D6

Step 6:
of
Attached the hardware parts E and E3 to the left side (06) using a small mallet. Then attach the
hardware part J using a screwdriver (not porvided).Then attach the hardware part XA using the hardware P5 and
a screwdriver (not provided). Then attach the hardware part D5 using the hardware L9 and a screwdriver
(not provided).
6
Attach the shelf (03), drawer top base (04), and bottom base (05) to the left side (06) using the
hardware part L and a screwdriver (not provided). Insert hardware part M into shelf (03).
05
04
03
06
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page
06
10
Step 7:
L
L
L
L
Vendor: S000139
J
J
E3
E3
E3
E3
E
E
J
J
J
J
L9
L9
D5
D5
D5
D5
ATENTION FOR POSITION
P5
XA
L
M
M

of
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
07
Conect the right side (07) using a hardware L and screwdriver (not provided). Insert hardware part M
into shelf (03).
Step 9:
Step 8:
7
Conect the upper base (01) using a hardware O and screwdriver (not provided). Insert the plastic foot
A2 using the hardware N and a small mallet.
Page
10
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
















Vendor: S000139

8 ofPage
Attach the back (11) using the hardware part N and a small mallet (not provided).
To secure the item to the wall use hardware part A, B3 and E9 using a screwdriver (not provided), then
attach the hardware part S to the item with a screwdriver (not provided).Then insert the shelf (2).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 11:
10



Step 10:







Vendor: S000139



9 Page

Attach the hardware part P7 to the door (12) using the hardware part T and a screwdriver (not provided),
then attach the door (12) to the side left (06) using hardware part D5 and D6.
76
77
10
09
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Horizontal Adjustment
Depth Adjustment
of
Vertical Adjustment
Attach the left side of drawer (76) and the right side of drawer (77) to the rear of drawer (09) and the
bottom of drawer (10) using the hardware part O and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 13:
Step 12:
10
Vendor: S000139
T
T
P7
O
O

10
8
Page
Attach the hardware part XC and XD using the hardware part P5 and a screwdriver (not porvided),
then attach the hardware part P7 to the drawer front (08) using hardware part T and a screwdriver
(not provided).
Step 15:
Attach the front of drawer (08) using the hardware part L and M and a screwdriver (not provided).
Step 14:
our #birleahome feature on Instagram.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
who will be able to resolve any issues with Birlea.
www.birlea.com
Additional Information:
Why don't you send us photos of your assembled furniture to [e-mail] to be shared in
For complete product information, images and dimension diagrams please visit the website
If you have any issues with your item please contact the retailer directly you purchased it from
of
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
10
P7
P5
P5
P5
XC
XD
Vendor: S000139
A1
L
L
M
M
T
T