Birlea ATLAS User manual

Vendor: S000053
Page 1 of 4
ASSEMBLY INSTRUCTIONS
ATLAS 4’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR ATLAS 4’ BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000053
Page 2 of 4
Part Li t Hardware Li t (found in box 1)
Part De cription Box Qty Part De cription Qty
1 Headend 1 1 A M6 x 16mm JCBC Screw 8
2 Footend 1 1 B M6 x 50mm JCBC Screw 4
3 Side Support 2 2 C M6 Nut 10
4 Side Frame 2 2 D M6 x 35mm JCBC Screw 6
5 Mid Support 2 1 E Double Slat Cap 11
6 Base Leg 1 3 F Single Slat Cap 22
7 Slat 3 22 G Finial 4
** M4 Allen Key & M5 Allen Key provided H M8 x 50mm JCBC Screw 2
I M8 Nut 2
Step 1: Fix the side support (3) to the headend (1) and footend (2) with hardware part .
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
IMPORTANT: Do not tightly ecure the crew before completing Step 2.

Vendor: S000053
Page 3 of 4
Step 2: Place the side frames (4) at the bottom of the side supports (3) and secure with hardware parts B
and C.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 3: Place the mid support (5) on top of both side frames (4) and secure using hardware parts H and I.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 4: ttach the base legs (6) to the mid support (5) using hardware parts C and D.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000053
Page 4 of 4
Step 5: Place the double slat caps into position on the mid support (5) then place the single slat caps onto
each slat (7). Firmly press into the side supports (3) then insert hardware part G to the headend (1) and
footend (2).
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.