Birlea STOCKWELL 4+2 CHEST User manual

www.birlea.com Page of 8
Vendor: S000350
1
STOCKWELL 4 + 2 CHEST
RUSTIC OAK EFFECT
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR STOCKWELL 4 + 2 CHEST RUSTIC.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to reposition.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS

2
Page of 8
Vendor: S000350
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
** Note : To secure the item to the wall, hardware G ( 2 pcs ) and L ( 2 pcs ) are not provided.
Parts List Hardware List (BOX 2 )
Part Descripion Qty Part Description Qty
01 1
Top panel
02
03
04
05
06
07
08
09
Bottom panel
Drawer front (Up)
Drawer back
Drawer side
Drawer bottom (Small)
1
1
1
1
1
1
1
1
Side panel ( Left )
Side panel ( Right )
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I1
I2
M6 x 60mm CSK Cap Wood screw
24
24
24
17
5
1
74
12
48
6
8
8
12
12
A1
A3
J1
J2
Back panel
M3.5 x 16mm C.B Screw
PCV Handle 7050.96
Allen key M4
M4 x 25mm C.B Screw
M4 x 38mm C.B Screw
10A
Drawer front (Down)
1
8'' x 1'' PP tape 2
Wall plug -
K
L
Back bone
Middle bone (Down)
2
2
2
11
12
13
Stud 192
Stud 192 screw
14'' Drawer slide (Left / Right)
14'' Drawer slide (Left / Right)
14
15
16
17
Middle bone (Up)
Center panel
Drawer front (Small Left)
Drawer back (Small)
4
2
4
Drawer bone
18 4
Drawer bottom
1
2
3
4
5
6
7
8
9
11
12
13
14
14
15
15
15
15
15
15
16
17
17
18
18
H
H
H
13
15
15
16
H
11
14
15
15
17
18
H
12
14
15
15
17
18
H
Box
1
2
1
2
1
2
2
2
1
1
1
1
1
2
1
1
1
2
10
1
2 6
5/8 PCV Nail Leg
M
110B Drawer front (Small Right) 1
10A 10B

3
Page of 8
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, D, E, F, H, J1 and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
J1 J1
J1
F
01
03 04
05
06
07
08
18
14
11
12
H
H
H
A2
A2
A2
A1
A1
A1
A1
A1
A1
B
B
B
B
A2
A2 A2
03 04
05 05
x6 x4
x2
x4
x4
x2 x2
x4
x4
x3
x2
x4
x2
x2
A1
B
x2
x2
x4
x2
x2 x12
Ex12
Ex12
Ex12
Mx6
02
10A
H
10B

4
Page of 8
Vendor: S000350
Step 2: Attach panel (6), (7) and (8) to panel (3) and (4) using hardware A1 and A2 with a screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach panel (3), (4) and (5) to panel (1) using hardware A1 and A2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach panel (6) to panel (5) using hardware C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1
A2
A3
A1
A1 A2
A1
A3
C
D
A3 x 8
A3 x 6
C x 1
D
03
04
06
07
08
03
04
05
07
08
01
06
03
04
01
05
07
08

5
Page of 8
Vendor: S000350
Step 5: Insert panel (9) along the slot.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Attach panel (2) to panel (3) and (4) using hardware C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach hardware I1 into panel (1), (2), (3) and (4) using hardware I2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
03
04
01
05
08
09
C
D
03
04
01
08
09
02
I1
I2
03
04 01
08
09
02
C x 4
D
I1 x 8
I2 x 8

6
Page of 8
Vendor: S000350
Step 9: Attach panel (18) to panel (11) and (14) and another panel (18) to panel (12) and (14)
using hardware A1 and A2 with a screwdriver (not provided).
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1 A2
A1
A3
11 12
14
14
18 18
Step 8: Assemble the drawer components using hardware E, G and J2.
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E
E
E
E
E
E
J2
J2
J2
J2
J2
J2
E x 12
G x 16
( L/R )
J2 x 4
A3 x 8
10
13
15
10
13
15
13
15
16
10
16
15
G
G
x4
x4
A/B
A/B
A/B
13
10
16
15
A/B

Page of 8
Vendor: S000350
7
Step 10: Assemble the drawer components using hardware E, G and J2.
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
J2
E
E
E
E
E
E
Step 11: Assemble the drawer components using hardware E, G and J2.
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E
E
E
E
E
E
J2
J2
J2
J2
J2
J2
J2
J2
J2
J2
J2
E x 12
G x 16
( L/R )
J2 x 4
E x 12
G x 16
( L/R )
J2 x 4
11
18
14
15
G
17
18
14
15 11
17
18
14
15 11
15 G
x4
x4
17
18
14
11
15
12
18
14
15
17
18
14
15 12
17
18
14
15 12
15 G
Gx4
x4
17
18
14
12
15

Page of 8
Vendor: S000350
8
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
G
K
L
1.
K
E
2.
PLEASE NOTE that wall fixings are not supplied as different wall materials require different fixing
devices. You must use fixings devices suitable for the type of wall you intend to mount product to.
Ensure the head of any screw used has a diameter greater than the mounting hole and the fixing
is safe and secure before use.
Birlea Furniture advise you use the wall straps provided to further enhance the safety of this
product.
J2
J1
J1
J2
Step 13: To secure the item to the wall use hardware G, K and L using a screwdriver (not provided).
Then attach hardware part K to the panel (1) using hardware E with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 12: Assemble the drawer in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
04
11
11
12
12
E x 2
G x 2
K x 2
L x 2
10A 10B