Birlea CONRAD 4 DRAWER NARROW CHEST SILVER OAK User manual

Vendor: S000369
Page 1 of 11
ASSEMBLY INSTRUCTIONS
CONRAD 4 DRAWER NARROW CHEST SILVER OAK
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CONRAD
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this chest if any parts are missing , damaged or worn.
DO NOT use this chest unless all fixings are secured.
Always use on a level, even surface.
WARNING: If this item is placed on a non-carpeted floor you must place some protection under all legs to stop
CARE & MAINTENANCE:
DO NOT push the chest as this will damage the legs.
Always lift the chest with two people to reposition.
Keep any sharp objects away from the chest.
www.birlea.com
the chest from moving. If this is not adhered to there is no guarantee if the chest collapses.
Periodically check all screws & fixings to ensure they are secure.
4 DRAWER NARROW CHEST SILVER OAK.

Vendor: S000369
Page 2 of 11
4 x H
Inner Drawer
Runners
4 x P
Inner Drawer
Runners
4 x Q
Outer Drawer
Runners
4 x R
Outer Drawer
Runners
2 x S
Joining Piece
14 x I
Wooden
Dowel
5 x J
Screw
4x40mm
1 x K
Bracket
1 x L
Screw
4x12mm
12 x M
Screw
3x14mm
1 x N
Wall Plug
6 x O
Bolt
6x35mm
30 x A
Cam Lock
30 x B
Quickfit Screw
18 x C
Screw
4x30mm
48 x G
Screw
3x12mm
4 x E
Handle
8 x F
Bolt
6x30mm
12 x D
Wedge
1 - 1pc 2 - 1pc 5 - 1pc 6 - 1pc3 - 1pc 4 - 2pcs
7 - 4pcs 8 - 4pc 1s 1 - 4pcs 12 - 2pcs9 - 4pcs 10 - 4pcs
13 - 2pcs 14 - 2pcs 17 - 1pc15 - 1pc 16 - 1pc
Hardware
Parts

Vendor: S000369
Page 3 of 11
C x 4
A x 4
B x 4
F x 2
E x 1
H x 1
P x 1
G x 6
C
C
C
C
8
9
9
9
7
78
7
10
711
E
A
A
B
B
F
F
B
B
A
A
H
G
G
G
G
G
G
P
P
G G
G
H
GG G
Step 1
DRAWERS
Fix panels 7, 8and 9together
using screws C.
Fit quickfit screws B
to front panel 10.
Fix handle Eto front of
drawer using bolts F.
Turn drawer over, and
fix inner drawer runners
Hand Pto underside of
drawer using screws G.
Repeat for all four drawers.
x4
Insert cam locks Ato
panels 7and 9.
Fit panel 10 to front of
drawer and turn cam locks
clockwise to tighten.
Fit base panel 11 into grooves
between panels 7and 9.

Vendor: S000369
Page 4 of 11
G x 12
Q x 4
G x 12
R x 4
Q
G
Q
2
Q
Q
Q
G
G
G
G
G
G
G
G
R
G
R
G
3
R
R
R
G
G
G
G
G
G
G
G
G
G
G
Step 2
Fix outer drawer runners Qto panel 2using screws G.
Step 3
Fix outer drawer runners R
to panel 3using screws G.
G
G
G
G

Vendor: S000369
Page 5 of 11
2
14
14
5
4
4
S
S
A x 5
B x 5
I x 5
S x 2
A
A
A
A
AB
I
I
B
I
I
I
B
B
B
2
4
4
5
6
17
Step 4
Insert quickfit screws Band wooden dowels Ito panel 2.
Insert cam locks to panels 4, 5, 6and 17.
Step 5
Join back panels 14 together
using joining pieces S.
Slide back panels 14 into slot in
panel 5, behind panels 4.
Fit panels 4, 5, 6and 17 to panel 2.
Turn cam locks clockwise to tighten.

Vendor: S000369
Page 6 of 11
A x 5
B x 5
I x 5
B
B
BB
B
A
A
A
A
A
I
I
I
I
I
3
5
4
4
6
17
2
Step 6
Insert quickfit screws Band wooden dowels Ito panel 3.
Insert cam locks to panels 4, 5, 6and 17.
Fit panel 3to panels 4, 5, 6and 17.
Turn cam locks clockwise to tighten.

Vendor: S000369
Page 7 of 11
L x 1
B x 4
K x 1
B
B
B
BK
L
K
L
15
2
3
Step 7
Fit quickfit screws Bto panel 1.
Fix bracket Kto panel 1using screw L.
Step 8
Slide back panel 15 into slots
between panels 2and 3.
Back panel 15 will also slot into
the joining piece.

Vendor: S000369
Page 8 of 11
A x 4
I x 4
D x 12
M x 12
D
M
1
2
3
A
A
A
A
II
II
Step 9
Insert cam locks Aand wooden dowels Ito panels 2and 3.
Fit panel 1to assembled unit.
Turn cam locks clockwise to tighten.
Step 10
Fit wedges Dto back of unit
to secure back panels.
Secure with screws M.
1
3
D
D
D
D
D
DD
D
D
D
D
D
MM
M
M
M
M
M
MM
M
M
M

Vendor: S000369
Page 9 of 11
C x 2
J x 4
O x 6
O
O
O
O
O
O
16
13
13
12
12
J
J
C
C
J
J
12
2
Step 11
Fix parts 12, 13 and 16 together using bolts O, as shown.
Step 12
Fix joined leg parts (Step 11) to
base of assembled unit using
screws Cand J, as shown.

Vendor: S000369
Page 10 of 11
J x 1
N x 1
WALL
N
J
2
Step 13
For extra stability, it is recommended that you fix your chest of drawers
to the wall using the additional hardware J & N, as shown. Screws J are
fixed from inside the unit, through the bracket and into the wall plug N.
Should you choose not to affix the product to the wall,
serious injury may be caused if the product tips over.
Please consider the wall
mounting & fixing guide when
securing your drawers.

Vendor: S000369
Page 11of 11
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
•If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
shared in our #birleahome feature on Instagram.
•Why don’t you send us photos of your assembled furniture to [email protected] to be
20kg
10kg
Step 14
Once the unit is in its final location and secured to the wall,
fit the drawers onto runners in unit as shown.
Please note: the maximum
recommended weight for this
cabinet is 10kg per drawer and
20kg for the top of the unit.