Birlea tetras User manual

Vendor: S000053
Page 1 of 5
ASSEMBLY INSTRUCTIONS
TETRAS 4’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR TETRAS 4’ BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000053
Page 2 of 5
Part Li t Hardware Li t (found in box 1)
Part De cription Box Qty Part De cription Qty
1 Headpost (L/R) 2 2 A M6 x 20 mm JCBC Screw 16
2 Footpost (L/R) 2 2 B M6 x 50 mm JCBC Screw 4
3 Headend 1 1 C M6 x 35 mm JCBC Screw 6
4 Footend 1 1 D M6 Nut 10
5 Side Support 3 2 E Double Slat Cap 11
6 Side Frame 3 2 F Single Slat Cap 22
7 Mid Support 3 1 G M8 x 50 mm JCBC Screw 2
8 Base Leg 1 3 H M8 Nut 2
9 Slat 4 22 **M4 & M5 Allen Key Supplied.

Vendor: S000053
Page 3 of 5
Step 1: Fix the headposts (1) to the headend (3) then attach the footposts (2) to the footend (4) using
hardware part .
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 2: Fix the side support (5) to the headposts (1) and footposts (2) using hardware part .
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 3: Place the side frame (6) at the bottom of the side support (5) using hardware parts B and D
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000053
Page 4 of 5
Step 4: Place the mid support (7) on top of both side frames (6) and secure using hardware parts G and H
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 5: Fit the base legs (8) to the mid support (7) according to the holes at the side and tightly secure using
hardware parts C and D.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 6: djust both of the side supports (5) into inner direction until the screws reach the end of the hole as
shown. Tighten the screws for the side supports and the mid support.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000053
Page 5 of 5
Step 7: Press hardware part E into the mid support (7) then place hardware part F onto an end of every slat
(9).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 8: Place the slats (9) into hardware part E then press hardware part F firmly into the side supports (5).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.