Birlea 150CM STOCKWELL BED User manual

www.birlea.com Page of 7
Vendor: S000350
1
150CM STOCKWELL BED
RUSTIC OAK EFFECT
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR 150CM STOCKWELL BED RUSTIC.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to reposition.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS

2
Page of 7
Vendor: S000350
Parts List Hardware List (BOX 3)
Part Descripion Qty Part Description Qty
01 1
Headboard panel
02
03
04
05
06
07
08
09
Tailstock panel
Drawer front
Drawer back
Drawer side
Drawer bottom
1
2
1
1
1
1
1
1
Bed side panel ( Left )
Bed side panel ( Right )
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I
44
44
44
58
1
24
8
6
6
6
4
A1
A3
J1
Center panel
M3.5 x 16mm C.B Screw
Allen key M4
16'' Drawer slide (Left / Right)
16'' Drawer slide (Left / Right)
M4 x 32mm C.B Screw
** You will need a small mallet and a screwdriver
for assembly.
** Some screws and wooden dowel may remain.
Headboard & tailstock bone
Headboard bone (Left)
Tailstock bone (Left)
1
1
2
2
4
2
2
Middle panel (1)
Middle panel (2)
Bed slat panel
Drawer bone
10
11
12
13
14
15
16
16
03
04
06
17
M4 x 38mm C.B Screw
4
J2
JRN nut
Flat washer M6 x 20mm
JCBC Screw M6 x 60mm
01
02
08
09
10
11
12 13
14
15
16
03
07
05
19
18
18
20
16
17
18
18
20
19
17
18
1
1
Middle panel (3)
Middle panel (4)
Box
1
3
3
3
3
2
2
2
3
3
4
3
2
3
1
2
3
3 25
5/8 PCV Nail LegK
19
20
1Headboard bone (Right) 3
1Tailstock bone (Right) 3

3
Page of 7
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, C, I and K.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1
B
A2
A2
A1
A1
A1
B
I
01
02
03
08
09
10
10
14
11
13
12
04
06
A2
A2
A2
A2
A2
A1
A1
B
B
B
B
BI
I
17
A2
16
20
A1
B
B
x10
x11
x2
x4
x4
A1 x4
x4
A1
B
x4
x4
A1
B
x4
x4
x3
x8
x6
x7
x4
x2
x2
x4
x2
x2
x4
x2
x4
x4
x2
x2
x4
x2
x2
A2
x2
x4
x2
x4
A2 x4
B
K
Kx3
Kx3
Kx4
Kx4
Kx2
Kx2
Kx2
Kx2
Kx3
A2
07
Bx2
A2
05
Bx3

4
Page of 7
Vendor: S000350
Step 2: Fix hardware J1 into middle panel (11), (12), (13) and (14) using hardware D
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach headboard bone (3), (4) and (5) to headboard panel (1) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach tailstock bone (3), (6) and (7) to tailstock panel (2) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DDD
J1
J1
J1
14
12
11
13
01
05
04
03
02
07
06
03
A2
A1
A1
A3
A2
A1
A1
A3
J1 x 4
( L/R )
D x 12
A3 x 10
A3 x 8

5
Page of 7
Vendor: S000350
Step 5: Attach middle panel (11) and (12) to bed side panel (8) and center panel (10) then attach another
middle panel (13) and (14) to bed side panel (9) and center panel (10) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach headboard panel (1) to bed side panel (8), (9) and center panel (10) using hardware C, G and H.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Attach bed side panel (8), (9) and center panel (10) to tailstock panel (2) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1
A2
A3
A1
10
09
08
14
11
12
13
A1 A2
A1
A3
10
09
08
14
11
12
13
02
10
09
08
14
11
12
02
01
C
G
H
A3 x 16
A3 x 6
C
H x 6
G x 6

6
Page of 7
Vendor: S000350
Step 8: Attach bed slat panel (15) to bed side panel (8) and (9) using hardware E with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9: Attach drawer bone (20) to drawer front (16) and drawer back (17) using hardware A1 and A2
with a screwdriver (not provided).
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E
08
01
02
09
15
20 16
17
A1
A2
A1
A3
E x 8
A3 x 4

Page of 7
Vendor: S000350
7
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
J2
J1
Step 11: Assemble the drawer in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
J2
J1
01
02
09
16
15
Step 10: Assemble the drawer components using hardware D, F and J2.
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
J2
D
D
D
D
D
D20
17
16
19
18 J2
J2
J2
J2
J2
F x 16
D x 12
( L/R )
J2 x 4
20
17
18
16
F
F
20
17
18
16
19 20
17
18
16
19
18
x4
x4