Birlea HOUSTON 2 User manual

HOUSTON 2 DRAWER BEDSIDE
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR HOUSTON 2 DRAWER BEDSIDE .
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to repositions.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 7
Vendor: S000350
1

Parts List Hardware List
Part Descripion Qty Part Description Qty
01 1
Top panel
02
03
04
05
06
07
08
09
10
Bottom panel 1
1
1
Side panel ( Left )
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I
J1
M6 x 50mm CSK Cap Wood screw
M3.5 x 16mm C.B Screw
4
4
4
8
4
1
24
Allen key M4
16
4
8
JCBC screw M6 x 30mm
4
JCBC screw M6 x 40mm
4
M4 x 38mm C.B Screw
A1
A3
2
11
14'' Drawer slide (Left / Right)
14'' Drawer slide (Left / Right)
L1
L2
Side panel ( Right )
Back panel
Drawer front ( Up )
1
1
Drawer bottom
Metal frame
2
2
Metal bone 4
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
4
Drawer back 2
Drawer side 4
Stud 192
4
Stud 192 screw
01
02
05
03
06
04
08
Page of 7
Vendor: S000350
08 09
10
12
12 12
12
11
11
12
Drawer front ( Down ) 1
4020 L Bar 100mm
J2
1
M3 x 12mm C.B Screw 2
K
07
08
08 09
10
K

3
Page of 7
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, F and L1.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 2: Attach side panel (3) and (4) to top panel (1) using hardware A1 and A2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Insert back panel (5) along the slot.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
L1
FFF
L1
L1
x4 x4
x4
A2 x4 A1 x2
Bx4
A1 x2
Bx4
01
03
04
A1 A2
A1
A3
A3 x 4
01
01
03
03
04
04 05

4
Page of 7
Vendor: S000350
Step 4: Attach bottom panel (2) to side panel (3) and (4) using hardware C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
C
D
C x 4
D
Step 5: Attach hardware J1 into top panel (1), bottom panel (2), side panel (3) and (4) using hardware J2 with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
J2 x 4
J1 x 4
J1
J2
01
02
02
03
03
04
04
05
05

5
Page of 7
Vendor: S000350
Step 6: Attach metal frame (11) to metal bone (12) using hardware D and I.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
D
I
11
I x 8
D
Step 7: Attach metal frame (11) to bottom panel (2) using hardware D and H.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
D
H
11
H x 4
D
02
03
05
11
11
11
11
12
12
12
12

6
Page of 7
Vendor: S000350
Step 8: Attach the hardware K to the drawer front down (7) using hardware E, attach the drawer front up (6) or
drawer front down (7) and the drawer back (9) to 1x drawer side (8) using hardware G.
Slide in the drawer bottom (10) and attach the other drawer side (8) using hardware G.
Lastly attach the hardware L2 to the drawer sides (8) using hardware (F).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
L2
L2
L2
F
F
F
F
F
F
L2
L2
L2
F x 12
( L/R )
L2 x 4
G x 16
07
08
08
09
10
E
E x 2
K x 1
06
08
08
09
10
06
08
09
08
09
06
09
08 06
10
10
08
07
08
09
08
09
07
09
08 07
10
10
08
07
K

Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
Page of 7
Vendor: S000350
7
Step 9: Assemble the drawer in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
L1
L2
L1
L2
01
04
06
07
12
12
12
11
11
K