Birlea TORONTO BED User manual

ASSEMBLY INSTRUCTIONS
TORONTO BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR TORONTO BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.




the bed frame from moving. If this is not adhered to ther
CARE & MAINTENANCE:
Assemble in the room of use.

DO NOT push the bed frame as this will damage the legs.

Keep any 
Page 1 of 4
Vendor: S000317

  
      
Bed
      
      
      
      
      
  
      
Trundle
      
      
      
      
   
      
Page 2 of 4
P1
P2
P4
P8
P3
P3
P5
P5
P6
P6
P7
Vendor: S000317

Page 3 of 4
E
D
B
B
Step 1: Attach the side rail (P3) to the headboard (P1) and footboard (P2) using hardware parts A, B, C and E.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 2: Lay the slats (P4) between the side rail (P3) using hardware part D and fully tighten using a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach the trundle endboard (P5) to the trundle side rail (P6) using hardware parts F, H, I and J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
C
F
F
J
I
H
Vendor: S000317

J
H
Page 4 of 4
Step 4: Attach the trundle leg bar (P7) to the trundle side rail (P6) using hardware parts G, H, I and J.
CAUTION: When the leg ties are cut, the legs spring back.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Lay the
trundle slat (P8) between the trundle side rail (P6) using hardware part K and fully tighten using a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
I
G
I
K
Vendor: S000317
Additional Information:



will be able to resolve any issues with Birlea.
Why don’t you send us photos of your assembled furniture to  to be shared in our
#birleahome feature on Instagram.