Birlea Sorrento User manual

Vendor: S000083
Page 1 of 9
ASSEMBLY INSTRUCTIONS
SORRENTO 2 DOOR 1 DRAWER WARDROBE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR USE YOUR
SORRENTO 2 DOOR 1 DRAWER WARDROBE
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
CARE & MAINTENANCE:
Assem le in the room of use.
Assem ly should e carried out with this item laying flat, not standing upright.
Assem le on a soft, clean surface to prevent damages.
To remove the printed num ers on the pieces, use the eraser provided.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the legs.
Always lift the item with two people to reposition.
Keep any sharp o jects away from the item.
www.birlea.com

Vendor: S000083
Page 2 of 9
Parts L st
1 – Left Panel x 1 2 – R ght Panel x 1 3 – Back Support Panel x 2
4 – Top Panel x 1 5 – Base Panel x 1 6 – Drawer x 1
7 – Large Back Panel x 3 8 – Small Back Panel x 1 9 – Left Door x 1
** You w ll need a screwdr ver for assembly
10 – R ght Door x 1

Vendor: S000083
Page 3 of 9
Hardware L st
Part Descr pt on Qty
A
8 x 25 mm Plastic Dowel
16
B
M6 x 60 mm JCBC
8
C M3.5 x 16 mm CSK
124
D
M4 x 25 mm CSK
30
E
65 mm Allen Key
1
F
Mini Fix Bolt
4
G
Mini Fix Housing
4
H
22mm Handle Screw
2
I
38mm Handle Screw
1
J
20 mm CSK Screw
1
AA
Handle
3
AB
Hanging Rail
1
AC
Hinge
6

Vendor: S000083
Page 4 of 9
Step 1: Insert hardware parts A and F using a small mallet and a screwdriver (not provided). Attach the AC2
hardware part to the left panel (1) and right panel (2) using hardware part D and a screwdriver (not
provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000083
Page 5 of 9
Step 2: Insert hardware part A to the ack support panels (3) using a small mallet (not provided). Join the left
panel (1) to the right panel (2) using the ack support panels (3) and insert hardware part AB. You will need
to use hardware parts F and G with a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000083
Page 6 of 9
Step 3: Attach the top panel (4) and ottom panel (5) using hardware parts A, B and E.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000083
Page 7 of 9
Step 4: Insert the drawer (6).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Step 5: Attach the large ack panels (7) and small ack panel (8) using hardware part C and a screwdriver
(not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000083
Page 8 of 9
Step 6: Secure the drawer (6) in place using hardware part D with a screwdriver (not provided). Attach
hardware part AA using hardware part I and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Step 7: Attach hardware part AC1 to the left door (9) and right door (10) using hardware part C, then attach
hardware part AA using hardware part H and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000083
Page 9 of 9
Step 8: Attach the doors to the frame and adjust as shown.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Additional Information:
• For complete product information, images and dimension diagrams please visit the website
www.birlea.com
• If you have any issues with your item please contact the retailer directly you purchased it
from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to i[email protected]om to be shared
in our #birleahome feature on Instagram.