Birlea RIO 4' User manual

Vendor: S000238
Page 1 of 6
ASSEMBLY INSTRUCTIONS
RIO 4’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR RIO 4’ BED FRAME
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT jump on this bed frame
DO NOT use this bed frame if any parts are missing, damaged or worn
DO NOT use this bed frame unless all fixings are secured
Always use on a level, even surface
WARNING: If this ed is placed on a laminated floor you must place some protection under all legs
to stop the ed frame from moving. If this is not adhered to there is no guarantee if the ed frame
collapses
CARE & MAINTENANCE:
Periodically chec all screws & fixings to ensure they are secure
DO NOT push the bed frame as this will damage the legs
Always lift the bed with two people to reposition
Keep any sharp objects away from the frame
www.birlea.com

Vendor: S000238
Page 2 of 6
Parts List Hardware List (found in box 1)
Part
Description Box Qty Part Description Qty
1 Headend Panel 1 1 A 30 mm Dowel 6
2 Left Headend Post 3 1 B 40 mm Dowel
3 Right Headend Post 3 1 C 16 mm Screw
4 Side Rail 2 2 D 30 mm Screw 4
5 Slat 1 24 E 32 mm Bolt 2
6 Centre Rail 2 1 F ut 2
7 Support Leg 1 2 G 50 mm Bolt 2
Footend Panel 1 1 H 100 mm Bolt 6
9 Left Footend Post 3 1 J 100 mm Bolt 4
10 Right Footend Post 3 1 K Elliptical ut 4
** You will need a screwdriver, M11 spanner and
a small mallet (not provided)
L Metal Bracket 2
M Allen Key 1
N Spacer 2

Vendor: S000238
Page 3 of 6
Step 1: Attach the support legs (7) to the centre rail (6) using hardware parts G and M, then insert hardware
part B to the side rails (4) using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 2: Insert hardware part A to the headend panel (1) and footend panel (8) using a small mallet (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000238
Page 4 of 6
Step 3: Attach the left headend post (2) and right headend post (3) to the headend panel (1) using hardware
parts H and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach the left footend post (9) and right footend post (10) to the footend panel (8) using hardware
parts H and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000238
Page 5 of 6
Step 5: Fix hardware part L to the headend panel (1) and footend panel (8) using hardware part C and a
screwdriver (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Attach the side rails (4) to the headend posts using hardware parts J, K and M, then fix the centre rail
(6) using hardware parts E and F and a spanner (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach footend posts to side rails (8) using hardware parts J, K and M, then fix the centre rail (6) using
hardware parts E and F with a spanner (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000238
Page 6 of 6
Step : Fix slats (5) to the side rails (4) and centre rail (6) using hardware parts and D with a screwdriver
(not provided). Make sure to start from the ends and work towards the middle.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.