Birlea Corona series User manual

Page 1 of 6
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY INSTRUCTIONS:
Please check contents and read instructions carefully before commencing assembly.
To avoid damages assemble the item on a soft, clean surface.
Assemble in the room of use.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fi ings are secured.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Keep small parts out of the reach of children.
CARE & MAINTENANCE:
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations.
On unpacking the item you may notice an odour due to the production process, however, this will disappear
after a period of time.
DO NOT place the item ne t to a radiator or direct sunlight as this item is susceptible to temperature
change. It is recommended to maintain an even room temperature with no sudden fluctuations.
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as the use of these materials would invalidate any claims.
You may wish to re-treat the surface to maintain the original finish. This can be done using block wa (un-
perfumed). Please follow the manufacturer’s instructions carefully.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Periodically check all screws & fi ings to ensure they are secure.
DO NOT push the item as this will damage the base.
Keep any sharp objects away from the item.
ASSEMBLY INSTRUCTIONS
3 DRAWER CONSOLE TABLE WITH SHELF
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR 3 DRAWER
CONSOLE TABLE WITH SHELF.

Page 2 of 6
Parts List Har ware List
Part
Description Qty Part Description Qty
1
Top Panel
1
A 3.5 35 mm Screw 32
2
Front Panel
1
B 8 25 mm Wooden Dowel 46
3
Back Panel
1
C 3.5 35 mm Screw
24
4
Side Panel
2
D
3/16 5/8 Bolt
3
5
Leg Pack
2
E
Handle
3
6
Leg Pack
2
** You will nee a small mallet an a screw river.
7
Side Drawer Runner
2
8
Shelf Panel
1
9
Drawer Front
3
10
Drawer Side
6
11
Drawer Back
3
12
Dr
awer Base
3
13
Centre Drawer Runner
2

Page 3 of 6
Step 1: Insert hardware part B using a small mallet (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 2: Attach one leg (5) and one leg (6) to a side panel (4) using hardware part A. Repeat for the remaining
legs and side panel. You will need to use a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 4 of 6
Step 3: Insert the side drawer runners (7) and centre drawer runner (13) to the front panel (2) and back
panel (3) using hardware part A and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 4: Attach the front panel (2), back panel (3) and shelf (8) to an assembled end frame using hardware
part A and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 5 of 6
Step 5: Attach the remaining assembled end frame using hardware part A and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 6: Attach the top panel (1) using hardware part A and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 6 of 6
Step 7: Assemble the drawer components using hardware parts C, D and E with a screwdriver (not
provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 8: Insert the assembled drawers and secure using hardware part B and a small mallet (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Additional Information: