Black & Decker PW1500 User manual

®
Catalog Number PW1500
INSTRUCTION MANUAL
IFYOU SHOULD EXPERIENCE A PROBLEM
WITH YOUR BLACK & DECKER PRODUCT,
CALL 1-800-544-6986
INMOSTCASES,ABLACK& DEOKI3:_REPRESENTATIVECANRESOLVEYOUR PROBLEMOVER
THEPHONE.IFYOUHAVEASUGGESTIONORCOMMI_, GIVEUSAC,AU_.YOURFEEDBACKIS
VITALTO BLACK& DECI"_R.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAI(,IOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACI6N, CENTROS .DESERVICIO
Y POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Z_WARNING:Whenusingthisproduct,
basicprecautionsshouldalwaysbe
followed,includingthefollowing:
1.Readandunderstandallinstructions
beforeusingtheproduct.
2.Toreducetheriskofinjury,close
supervisionisnecessarywhenaproduct
isusednearchildren.
3.Knowhowtostopthisproductand
bleedpressurequickly.Bethoroughly
familiarwiththecontrols.
4.Stayalert-watchwhatyouaredoing.
5.Donotoperatethisproductwhen
fatiguedorundertheinfluenceofalcohol
ordrugs.
6.Keepoperatingareaclearofall
persons.
7.Donotoverreachorstandonunstable
support.Keepgoodfootingandbalance
atalltimes.
8.Followthemaintenanceinstructions
specifiedinthemanual.
9.ThisproductisprovidedwithaGround
FaultCircuitInterrupter(GFCI)builtinto
thepowercordplug.Ifreplacementofthe
plugorcordisneeded,useonlyidentical
replacementparts.
10.ZLWARNING:RiskofInjectionor
Injury.DoNotDirectDischargeStreamat
Persons.
Whenusingthisproduct,
basicprecautionsshouldalwaysbe
followed,includingthefollowing:
1.Alwaysfollowdetergentmanufacturer's
labelrecommendationsforproperuseof
detergents.Alwaysprotecteyes,skinand
respiratorysystemfromdetergentifused.
2.Nevertrytostopordeflectleakswith
anybodypart.
3.Neverputhandorfingersoverthe
spraytipwhileoperatingtheunit.
4.Alwayswearsafetyglassesorgoggles,
hearingandrespiratoryprotectionand
protectiveclothingwhenoperatingor
performingmaintenance.
5.Alwaysengagethetriggersafetylatch
inthesafepositionwhensprayingis
stoppedevenifonlyforafewmoments.
6.Keepclearofnozzle.Neverdirecthigh
pressuresprayatanyperson,animalor
self.
7.Donotusepressurethatexceedsthe
operatingpressureofanyoftheparts
(hoses,fittings,etc.)inthepressurized
system.Neverusewithanyother
manufacturersaccessoriesor
components.
8.Neversprayflammableliquidsoruse
pressurewasherinareascontaining
combustibledust,liquidsorvapors.
9.Neveroperatethismachineinornear
anexplosiveenvironment.
10.Donotsprayelectricalapparatusand
wiring.
11.Neverdisconnectthehighpressure
dischargehosefromthemachinewhile
thesystemispressurized.To
depressurizemachine,turnpowerand
watersupplyoff,thenpressguntrigger
2-3times.
12.Neverpermanentlyengagethetrigger
mechanismonthegun.
13.Neveroperatethemachinewithoutall
componentsproperlyconnectedtothe
machine(handle,gun/wandassembly,
nozzle,etc.).
14.Alwaysturnwatersupply"on"before
turningpressurewasher"on"unless
drainingforstorage.Runningpumpdry
causesseriousdamage.
15.Donotoperatethepressurewasher
withtheinletwaterfilterremoved.Keep
filterclearofdebrisandsediment.
16.Neveroperatepressurewasherwith
brokenormissingparts.Check
equipmentregularlyandrepairorreplace
wornordamagedpartsimmediately.
17.Useonlythenozzles,partsand
accessoriessuppliedwiththismachine.
18.Neverleavethewandunattended
whilethemachineisrunningorswitched
on.
19. Always hold gun and wand firmly
when starting and operating the machine.
20. Pressure washer is not meant to
pump hot water. Never connect it to a hot

watersupplyasitwillsignificantlyreduce
thelifeofthepump.
21.Neverstorethepressurewasher
outdoorsorwhereitcouldfreeze.The
pumpwillbeseriouslydamaged.
22.Dischargeresidualpressureby
pressingthetriggeruntilnomorewater
comesoutofthenozzle.
Z_CAUTION:Wearappropriatehearing
protectionduringuse.Undersome
conditionsanddurationofuse,noisefrom
thisproductmaycontributetohearing
loss.
z_WARNING:Thisproductcontains
chemicals,includinglead,knowntothe
stateofCaliforniatocausecancer,and
birthdefectsorotherreproductiveharm.
Wash hands after handling.
This product must be grounded. If it
should malfunction or break down,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product is
equipped with a cord having an
equipment-grounding conductor and a
grounding plug. The plug must be
plugged into an appropriate outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances.
Z_DANGER: Improper connection of the
equipment-grounding conductor can
result in a risk of electrocution. Check
with a qualified electrician or service
personnel if you are in doubt as to
whether the outlet is properly grounded.
Do not modify the plug provided with the
product - if it wilt not fit the outlet, have a
proper outlet installed by a qualified
electrician. Do not use any type of
adapter with this product.
Z_WARNING: To reduce the risk of
electrocution, keep all connections dry
and off the ground. Do not touch plug with
wet hands.
This pressure washer is provided with a
Ground Fault Circuit Interrupter (GFCI)
built into the plug of the power supply
cord. This device provides additional
protection from the risk of electrical
shock. Should replacement of the plug or
cord become necessary, use only
identical replacement parts that include
GFCI protection. See Figure 8 for testing
procedure.
z_WARNING: Connect directly to
outlet. Do not use with extension cord.
The use of an extension cord will
override the GFCl built into the plug of
the power supply cord resulting in the
risk of electrical shock.
• The label on your tool may include the
following symbols.
V .............. volts
A.............. amperes
Hz ............ hertz
W ............ watts
min .......... minutes
•x, ............ alternating current
............ direct current
no ............ no load speed
[] ............ Class II Construction
.../min ......revolutions or reciprocation
per minute
............ earthing terminal
z_ ............ safety alert symbol

M2J
A. Water outlet (OUTLET)
BIB1 Water inlet with filter (INLET)
C. High pressure turbo wand
D. Adjustable fan wand
E. Wheels
F. Revolving brush
G. Fixed brush
H/HI/H2 Gun with safety catch/hose
assemoty
I. Power supply cord with GFCI
J. Detergent applicator
K. Nozzle cleaning tool
L. On/off switch
M/MI/M2 Garden hose Quick Connect
N. Top handle
Figure 1 - Attach
wheels (E) by firmly
pressing onto the
pressure washer until
they snap into place.
Figure 2 - Snap the
top handle (N) into
place as shown.
O
E
until the two parts are locked as shown
in Figure 3.
0
Figure 4 - Connect the high pressure
hose (H1) to the water (OUTLET) (A) on
the cleaner by first inserting the brass
end of the hose into the threaded brass
outlet, then snugly threading on the
coupling.
High pressure
Figure 5 /5A - Separate the two portions
of the Quick Connect adapter (M) as
shown in Figure 5 and connect the
threaded end of the larger half (M2) to
your garden hose as shown in Fig. 5A.
Figure 3 - Insert the fan wand (D) into
the gun wand (H) by pushing and rotating

@ Gardenhose
Figure6-Connecttheremainingportion
oftheadapter(M1)tothewater(INLET)
(B)ofthecleanerasshown.Theintake
watertemperaturemustNOTexceed
50°C(122°F).Thewatersupplypressure
mustNOTexceed10bar(145psi).
z_CAUTION: The pressure washer must
only be used with clean water; use of
unfiltered water or corrosive chemicals
will damage the pressure washer.
°
Figure 7 - With the adapter (M2)
attached to your water hose, pull back on
the top section and push onto the water
inlet (B) of the pressure washer then
release.
Figure 8 - Connect garden hose to the
cold water source and turn water on full.
NOTE: Before cleaning any surface, an
inconspicuous area should be cleaned to
test spray pattern and distance for
maximum cleaning results. If painted
surfaces are peeling or chipping, use
extreme caution as pressure washer may
remove the loose paint from the surface.
The PW1500 Pressure Washer is
equipped with automatic delivery flow cut-
off:
When the trigger is released, the
dynamic pressure automatically cuts out
the motor.
When the trigger is pressed the pressure
drop automatically starts the motor and
the pressure is restored with a very slight
delay.
Figure 9 - Plug the Ground Fault
Circuit Interrupter (GFCl) (I) into a
working grounded outlet. TEST
BEFORE EACH USE. The indicator at
the top of the GFCl should turn red
when product is ready to use. Press
the "TEST" button (bottom). The red
indicator should disappear. Press
"RESET" button for use. Do not use if
the above test fails.
O
Figure 10 - Release the safety catch
shown in Figure 10, then press the
trigger for a few seconds to allow air to
escape and to discharge residual
pressure in the hoses.

Figure11-Turnonthepressurewasher
bydepressingthetophalfoftheswitch
(L)marked'T'.Theunitwillrunforafew
secondsasitbuildsuppressure,thenwilt
shutoff.Itwiltrunondemandasthegun
triggerisdepressed.Turnoffthepressure
washerbydepressingthelowerhalfof
theswitchmarked"0".
damageandallowsforcleaninglarge
surfaceareasquickly.
3.)Toremove,pressfanwandintogun
wandandtwistasshowninFigureC.
YOUR PRESSURE WASHER IS NOW
READY TO USE -PLEASE REVIEW
THE FOLLOWING FOR DETAILS ON
ACCESSORIES APPLICATION.
z_CAUTION: Before changing
accessories, turn unit off, pull trigger
to release pressure, and activate
safety catch.
• ADJUSTABLE FAN WAND
1.) Insert the fan wand (D) into the gun
wand (H) by pushing and rotating until the
two parts are locked as shown in Figure
A.
2.) To obtain maximum pressure, rotate
the fan wand nozzle in a clockwise
direction as shown in Figure B. This
narrow stream results in deeper cleaning
in a concentrated area. For a wider fan
pattern rotate the fan wand nozzle in the
counterclockwise direction. The wider fan
pattern reduces the risk of surface
•TURBO NOZZLE
1.) Insert the turbo nozzle wand (C) into
the gun wand (H) by pushing and
rotating until the two parts are locked as
shown in Figure D.
O
2.) There is no adjustment required with
the turbo nozzle.
3.) To remove, press nozzle wand into
gun wand and twist as shown in Figure
E.
•DETERGENT APPLICATOR
Follow manufacturer's label directions for
mixing correct concentrations of soap
and detergents.
To use the applicator:
1.) Unscrew top of detergent applicator

(J)andfillwithdetergent.
2.)Replacetop.
3.)Insertgunwand(H)intodetergent
applicator(J)untilitclicksfirmlyinto
3laceasshowninFigureF.
0
4. The cap on the top of the applicator
determines the amount of detergent that
is applied. Twist the cap towards the (+)
symbol to increase the amount of
detergent and toward the (-) symbol to
decrease the amount of detergent.
5.) Apply detergent from the bottom to
the top to prevent detergent from sliding
down and streaking.
6.) Leave detergent on the surface for a
few minutes but do not allow it to begin
to dry.
7.) Remove detergent applicator from the
gun wand by pressing down on the lever
as shown in Figure G and pulling the
nozzle straight out.
8.) Rinse detergent from surface.
9.) Flush detergent applicator with clean
water.
NOTE: DO NOT USE:
• Bleach, chlorine products and other
corrosive chemicals.
• Liquids containing solvents (i.e., paint
thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals wilt harm the unit and
will damage the surface being cleaned.
• ROTATING BRUSH
1.) Insert the rotating brush (F) into the
gun wand (H) by pushing and rotating
until the two parts are locked as shown in
Figure H.
Q
2.) Run unit to spin brush for cleaning.
3.) To remove, press brush wand into
gun wand and twist.
• FIXED BRUSH
1.) Insert the fixed brush (G) into the gun
wand (H) by pushing and rotating until
the two parts are locked as shown in
Figure I.
FO
2.) Run to disperse water while cleaning.
3.) To remove, press brush wand into
gun wand and twist.
Before starting any cleaning task it is
important to inspect the area for objects
which could create a hazard. Remove
objects from the area which could be
tripped over such as childrens toys or
outdoor furniture. Insure that all doors
and windows are closed tight. Also make
sure that all plants and trees in the
adjacent area are protected by a drop
cloth ensuring that they will not be
harmed by any over spray.

98121-00 Pressure Wash Revised ii/\i/24k!)mB2:00 PM Page 8
Remove the fan wand (D) from the
gun wand (H) as shown in Figure J.
5. Disconnect the garden hose from the
water inlet.
6. Disconnect the high pressure hose
from the high pressure outlet and drain
hose.
• Clean the nozzle with the cleaning tool
(14).Remove any dirt from the fan wand
nozzle hole as shown in Figure K and
rinse.
For cleaning tasks such as deck or
brick patio cleaning, limit your work area
to approximately 25 square feet at a time.
• Pre-rinse cleaning area with fresh
water.
• Use only detergents formulated for
pressure washers.
• Always test detergent in an
inconspicuous area before use.
• Begin with a wide fan nozzle spray
and adjust the pressure to the desired
spray pattern.
• The best angle for spraying water
against a cleaning surface is 45 degrees.
Spraying head on tends to cause dirt
particles to imbed in the surface. When
working on vertical surfaces, it is best to
apply detergent starting at the bottom and
working upwards which wilt prevent the
detergent from sliding down and causing
streaks.
1. Store pressure washer indoors away
from areas that might freeze.
2. Do not allow high pressure hose to
become kinked.
3. Turn unit on for a few seconds until all
water is removed from the pump. Turn
off immediately.
Clean the nozzle with the tool provided.
Remove any dirt from the spray wand
nozzle hole as shown in Figure 14 and
rinse.
Use only mild soap and damp cloth to
clean the tool. Z_OAUTION: Never use
the pressure washer to clean itself.
IMPORTANT: To r-ssure product
SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be
performed by authorized service centers
or other qualified service personnel,
always using identical replacement parts.
Recommended accessories for use with
your pressure washer are available from
your local dealer or authorized service
center. If you need assistance regarding
accessories, please call: 1-800-544-6986.
Z_WARNING: The use of any accessory
not recommended for use with this
pressure washer could be hazardous.
1. Depress the off switch and unplug the
cord from the outlet.
2. Turn off water at the faucet.
3. Discharge residual pressure by
pressing the trigger until no more water
comes out cf the adjustable nozzle.
4. Engage the gun safety catch.
Black & Decker offers a full network cf
company-owned and authorized service
locations throughout North America. All
Black & Decker Service Centers are
staffed with trained personnel to provide
customers with efficient and reliable
power tool service.
Whether you need technical advice,

repair,orgenuinefactoryreplacement
parts,contacttheBlack&Decker
locationnearestyou.
Tofindyourlocalservicelocation,refer
totheyellowpagedirectoryunder
"Tools--Electric"orcall:1-800-544-6986.
Black&Decker(U.S.)Inc.warrantsthis
productfortwoyearsagainstanydefects
inmaterialorworkmanship.The
defectiveproductwillbereplacedor
repairedatnochargeineitheroftwo
ways.
The first, which wilt result in exchanges
only, is to return the product to the
retailer from whom it was purchased
(provided that the store is a participating
retailer). Returns should be made within
the time period of the retailer's policy for
exchanges (usually 30 to 90 days after
the sale). Proof of purchase may be
required. Please check with the retailer
for their specific return policy regarding
returns that are beyond the time set for
exchanges.
The second option is to take or send the
product (prepaid) to a Black & Decker
owned or authorized Service Center for
repair or replacement at our option. Proof
of purchase may be required. Black &
Decker owned and authorized Service
Centers are listed under "Tools-Electric"
in the yellow pages of the phone
directory.
This warranty does not apply to
accessories. This warranty gives you
specific legal rights and you may have
other rights which vary from state to
state and province to province. Should
you have any questions, contact the
manager of your nearest Black & Decker
Service Center. This product is not
intended for commercial use.
Free Warning Label Replacement: If
your warning labels become illegible or
are missing, call 1-800-544-6986 for a
free replacement.
BJack& Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
See 'Toots-Electric'
- Yellow Pages -
for Service & Sales

TROUBLESHOOTING GUIDE
Symptom Solution
Motordoes not start. Plug in power cord.
Turn switch to the "On" position.
Squeeze trigger with switch in
"ON" position.
Press reset button at GFCI on plug
end of cord.
Unit does not reach Water faucet not fully Open water valve fully.
I
Cause
Unit not plugged in.
On/Off switch is in the Off
)osition.
Wand trigger not being
squeezed.
GFCI tripped.
high pressure, turned on.
Water inlet filter clogged.
Nozzle worn.
Pump is sucking air.
Water supply restricted.
Output pressure Not enough inlet water
varies high/low, supply.
Pump is sucking air.
No detergent.
Garden hose
connection leaks.
Spray wand or
extension leaks.
Water inlet filter clogged.
Discharge nozzle is
obstructed.
Detergent container is
empty.
Detergent bottle or suction
tube not properly
connected.
Detergent is too thick.
Filter on detergent suction
tube is clogged.
Damaged or clogged
detergent suction tube.
Discharge nozzle is
obstructed.
Loose fittings.
Missing/worn rubber
washer.
Spray wand not properly
attached.
Remove filter and rinse to clean.
Contact B&D Customer Service
Representative at 1-800-544-6986.
Check that hoses and fittings are air
tight. Turn off machine and purge
pump by squeezing trigger gun until a
steady flow of water emerges from the
nozzle.
Check water hose for kinks, leaks and
blockage.
Turn water on full force - check hose
for leaks and kinks.
Check that hoses and fittings are air
tight. Turn off machine and purge
pump by squeezing trigger gun until a
steady flow of water emerges from the
nozzle.
Removefilter(B1) and rinseto dean. Fig.L
Blow out or remove debris with tool
)rovided.
Add more detergent.
Check connections.
Use detergent recommended for use
in pressure washers only.
Run warm water through filter to
remove debris.
Remove obstruction or replace
detergent suction tube.
Blow out or remove debris with tool
)rovided.
Tighten fittings.
Replace washer in hose adapter.
Insert the spray wand into the wand
extension. Push in and turn to lock
spray wand into place.
10