Black Box SP070A User manual

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax [phone]
© Copyright 2000. Black Box Corporation. All rights reserved.
To install the DSL Surge Protector, connect the DSL
Surge Protector’s equipment side to your external DSL
modem (see the above illustration). Connect the line
side, using the RJ-11 cable provided, to the RJ-11 or RJ-45
DSL jack from the wall plate. Ground the surge
protector by connecting the ground wire to a ground
screw on the wall plate of an AC grounded outlet.
RJ-11 or
RJ-45 Jack
Splitter DSL Surge
Protector
Ground
Desktop
System
DSL Modem

NOVEMBER 2000
SP070A
DSL Surge Protector
CUSTOMER SUPPORT INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [email protected]
Use the DSL Surge Protector to provide absolute protection
for your DSL modems. This surge protector has a convenient
plug-and play-design, a self-resetting circuit, a bi-polar diode
design, and a high MTBF rating.
Turn over this page for installation instructions.